New VCAP-NV Design 2020 Certification VMware 3V0-41.19 Dumps

Shamiyo 07-15-2020

What will you get if complete VMware VCAP-NV Design 2020 certification? It is obviously awesome to get VMware VCAP-NV Design 2020 certification that you can gather customer information, including requirements, risks, constraints, and assumptions, and use that information to make design recommendations for NSX-T Data Center solutions. New VCAP-NV Design 2020 Certification VMware 3V0-41.19 Dumps have been released online to help you prepare for the 3V0-41.19 VMware Advanced Design NSX-T Data Center 2.4 Exam to complete VMware VCAP-NV Design 2020 certification. The great team collected VMware 3V0-41.19 real exam questions and verified all the answers to ensure that you can pass VMware 3V0-41.19 exam in the first go. Choosing New VCAP-NV Design 2020 Certification VMware 3V0-41.19 Dumps is a great way to complete your VMware 3V0-41.19 exam. 

How to complete VMware VCAP-NV Design 2020 certification?

We stated that VMware VCAP-NV Design 2020 (VMware Certified Advanced Professional – Network Virtualization 2020) certification is a great VMWare certification, which help you prove you have the skills in related field. To earn the VMware VCAP-NV Design 2020 certification, candidate should have 1 year of experience designing NSX-T Data Center solutions and 2 or more years designing physical and virtual data centers/networks. Additionally, you should pass the required exams. 

Certification Path For VMware VCAP-NV Design 2020

Have No VCAP Certifications

If you have no VCAP certifications, you will be required to earn VCP-NV 2020 Or hold a VCP-NV 2019. VCP-NV 2020 certification requires you to pass 2V0-41.19 VMware Professional NSX-T Data Center 2.4 or 2V0-41.20 Professional VMware NSX-T Data Center 3.0 exam. If you choose to complete 2V0-41.19 exam, you need to make sure that you can complete it before October 31, 2020. It is retiring soon on October 31, 2020. 

Earned VCP-NV 2020 certification successfully or hold a VCP-NV 2019 certification already, you can choose to pass 3V0-41.19 VMware Advanced Design NSX-T Data Center 2.4 Exam or 3V0-41.20 Advanced Design VMware NSX-T Data Center 3.0 exam to complete VMware VCAP-NV Design 2020 certification. The same as 2V0-41.19 exam, VMware 3V0-41.19 exam is also retiring on October 31, 2020.

Hold A Cisco Certification

If you hold a Cisco certification, you should submit proof that you hold an Active/Non-Expired Cisco CCIE certification, then choose to pass 3V0-41.19 or 3V0-41.20 exam to complete VMware VCAP-NV Design 2020 certification.

Hold a VCAP6-CMA Design-Deploy or Newer OR VCAP6-DTM Design-Deploy or Newer OR VCAP6-DCV Deploy or Newer or VCAP6-DCV Design or Newer

If you hold a VCAP6-CMA Design-Deploy or Newer OR VCAP6-DTM Design-Deploy or Newer OR VCAP6-DCV Deploy or Newer or VCAP6-DCV Design or Newer, you need to earn the VCP-NV 2020 certification, then choose to pass 3V0-41.19 or 3V0-41.20 exam to complete VMware VCAP-NV Design 2020 certification.

Hold a VCAP-NV Design 2019 or VCIX-NV 2019

If you hold a VCAP-NV Design 2019 or VCIX-NV 2019, you have two options to complete VMware VCAP-NV Design 2020 certification:

Option 1: Attend ONE of the training courses in 2020

● VMware NSX-T Data Center: Design [V2.4]

● VMware NSX-T Data Center: Design [V3.0]

Option 2: Pass 3V0-41.19 or 3V0-41.20 exam.

Hold a VCAP6-NV Deploy or Newer OR VCIX6-NV or Newer

If you hold a VCAP6-NV Deploy or Newer OR VCIX6-NV or Newer, you can choose to pass 3V0-41.19 or 3V0-41.20 exam to complete VMware VCAP-NV Design 2020 certification.

What skills does VMware 3V0-41.19 exam test mainly?

3V0-41.19 VMware Advanced Design NSX-T Data Center 2.4 Exam is a requirement of VMware VCAP-NV Design 2020 certification. Even we have stated that it will be retired on October 31, 2020, it is still available now. If you are preparing for 3V0-41.19 exam now, you can choose to prepare for VMware 3V0-41.19 exam to test your ability to gather customer requirements, risks, constraints, and assumptions, and use that information to make design recommendations for NSX-T Data Center 2.4 solutions.

VMware 3V0-41.19 exam is available in English. Real 3V0-41.19 exam tests 50 exam questions in 135 minutes, with a passing score of 300 using a scaled method. Currently, it mainly tests 7 sections to prove you have the related skills in VMware Advanced Design NSX-T Data Center 2.4 Exam.

Section 1 – Architecture and Technologies

Section 2 – Products and Solutions

Section 3 – Planning and Designing

Section 4 – Installing, Configuring, and Setup

Section 5 – Performance-tuning, Optimization, and Upgrades

Section 6 – Troubleshooting and Repairing

Section 7 – Administrative and Operational Tasks

New VCAP-NV Design 2020 Certification VMware 3V0-41.19 Dumps are written by the great team, who are professional in 3V0-41.19 exam sections and objectives. You can choose to take exam preparation with DumpsBase 3V0-41.19 exam dumps to complete 3V0-41.19 VMware Advanced Design NSX-T Data Center 2.4 Exam. 

Which is a effective way to check 3V0-41.19 dumps is valid for preparation?

New VCAP-NV Design 2020 Certification VMware 3V0-41.19 Dumps are highly recommended to be the good preparation materials for completing 3V0-41.19 VMware Advanced Design NSX-T Data Center 2.4 Exam. But there are still some candidates worried about if VMware 3V0-41.19 exam dumps are valid. Which is a effective way to check that VMware 3V0-41.19 dumps is valid? We have 3V0-41.19 free dumps for checking.

Read VMware 3V0-41.19 Free Dumps Online

Which NSX-T feature is used to allocate the network bandwidth to business-critical applications and to resolve situations where several types of traffic compete for common resources?

A. LAG Uplink Profile

B. Transport Node Profiles

C. LLDP Profile

D. Network I/O Control Profiles

Answer: D

An architect is helping an organization with the Physical Design of an NSX-T Data Center solution and resolving a network throughput bottleneck. 

This information was gathered during a workshop:

- A VM running a business critical application Is peaking at ~5Gbps

- Current host uplink is configured as Active/Standby with two 10Gb NICs.

- The installed server NIC model does not support GENEVE offload.

- All VM traffic is East/West.

- The business critical application VM communicates with multiple client VMs.

Which should the architect recommend to improve vSphere VM throughput?

A. Configure the Transport Node Uplink Profile to use a Load Balance Source teaming policy with two active uplinks.

B. Deploy an additional Edge Node to the Edge Node Cluster.

C. Replace the existing network switches and routers with newer higher-performance.

D. Replace the existing NICs with a model that supports GENEVE offload.

Answer: D

Which three must be taken into consideration when creating a Logical Design for a planned migration? (Choose three.)

A. A transport node can attach single VLAN transport zones with single N-VDS.

B. An N-VDS with the same name can be attached to both Overlay and VLAN transport zones.

C. An N-VDS can attach to both an Overlay and a VLAN transport zone to a N-VDS having different name/s.

D. An N-VDS can only attach to a single Overlay transport zone.

E. An N-VDS can only attach to a single VLAN transport zone.

F. An N-VDS can only attach to a multiple VLAN transport nodes.

Answer: B,D,F

An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. 

This information was gathered during the Assessment Phase:

- Maximum performance and availability is required between the physical and virtual network.

- Load Balancing service is required for back-end web servers.

- NAT is required.

Which should the architect include in their design?

A. Deploy a Tler-1 gateway and connect It to an Active/Active Tier-0 gateway with ECMP configured.

B. Deploy an Active/Active Tier-0 gateway and configure ECMP.

C. Create two separate VLANs to connect the Tier-0 gateway upstream traffic and configure ECMP.

D. Deploy an Active/Passive Tier-0 gateway and configure ECMP.

Answer: A

Which is associated with the Discover Task of the Engagement Lifecycle?

A. Create and document the logical and virtual design.

B. Gather and document requirements, assumptions and constraints.

C. Build, deploy, implement and test the design.

D. Measure performance against customer's requirements.

Answer: B

An NSX-T architect is working with a customer who wants to improve performance and future-proof

their workloads with a multi-site architecture. 

A current-state analysis captured this information:

- Latency between sites Is 160ms.

- Bandwidth is 2Gbps.

- The MTU is 1600.

What two VMware design recommendations should the architect recommend to the organization to achieve future-proofing? (Choose two.)

A. Latency must be less than 150ms.

B. Bandwidth must be at least 10Gbps.

C. MTU is recommended to be 9000.

D. MTU must be at least 1700.

E. Latency RTT is acceptable.

Answer: A,C

An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.

This information was gathered during the Assessment Phase:

- There Isn't much budget available for a new off-shore site.

- The new site is decentralized and no communication with the main data center is required.

- The design will need to cater for availability, upgrades, and failure scenarios.

Which three should the architect recommend In their design? (Choose three.)

A. Collapse the Management/Edge/Compute cluster.

B. A Shared Edge/Management cluster and one for Compute.

C. Separate the hosts physical NICs for VSS and N-VDS.

D. Install a minimum 4 ESXi hosts In the site.

E. Make all pNICs part of N-VDS and VMKs will be migrated.

F. Install a minimum of 6 ESXi hosts in the site.

Answer: A, C, D

Which three assessment findings are part of a Conceptual Design? (Choose three.)

A. assumptions

B. vendor model

C. justifications

D. constraints

E. host names

F. risks

Answer: A,D,F

An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.

This information was gathered during a workshop:

- Some workloads should be moved to a Cloud Provider.

- Extend network's VLAN or VNI across sites on the same broadcast domain.

- Enable VM mobility use cases such as migration and disaster recovery without IP address changes.

- Support 1500 byte MTU between sites.

Which should the architect include in their design?

A. SSL VPN

B. Reflexive NAT

C. L2 VPN

D. Load Balancer

Answer: C

An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.

This information was gathered during the Assessment Phase:

- Customer Is concerned with NSX Manager availability.

- 3 cabinets/racks are available in the data center.

- No integration with 3rd party solution is required.

- There is no budget for physical equipment acquisition.

- The 3 cabinets/racks do not share the same L2 domain.

Which three should the architect include in their design to address the customer's concern with NSX Manager availability? (Choose three.)

A. Use another NSX Manger IP in case an appliance falls.

B. Deploy 2 cold standby NSX Manager appliances in rack 2/3.

C. Deploy an NSX Manager Appliance per rack and cluster them.

D. Use a physical/internal load-balancer with the cluster.

E. Use separate IP per NSX Manager appliance per rack.

F. Deploy a single active NSX Manager appliance in rack 1.

Answer: C,D,E