Updated HPE6-A73 Dumps Questions And Answers – Proper Study Guide Online

1. A network engineer is having a problem adding a custom-written script to an AOS-CX switch’s NAE GUI. The script was written in Python and was successfully added on other AOS-CX switches.

The engineer examines the following items from the CLI of the switch:

What should the engineer perform to fix this issue?

2. A network has two AOS-CX switches connected to two different service providers. The administrator is concerned about bandwidth consumption on the service provider links and learned that the service providers were using the company as a transit AS.

Which feature should the administrator implement to prevent this situation?

3. Examine the output from an AOS-CX switch implementing a dynamic segmentation solution involving downloadable user roles:

Switch# show port-access role clearpass

Role information:

Name: icxarubadur_employee-3044-2

Type: clearpass

Status: failed, parsing_failed

Reauthentication Period:

Authentication Mode:

Session Timeout:

The downloadable user roles are not being downloaded to the AOS-CX switch.

Based on the above output, what is the problem?

4. Which protocol does NetEdit use to discover devices in a subnet during the discovery process?

5. What must a network administrator implement in order to run an NAE script on an AOS-CX switch?

6. A company has an existing wireless solution involving Aruba APs and Mobility controllers running 8.4 code.

The solution leverages a third-party AAA solution. The company is replacing existing access switches with AOS-CX 6300 and 6400 switches. The company wants to leverage the same security and firewall policies for both wired and wireless traffic.

Which solution should the company implement?

7. Examine the AOS-CX configuration:

The switches have a default factory password setting NetEdit fails to access the configuration of the AOS-CX switches.

What should the administrator do to solve this problem?

8. What is the correct way of associating a VRF instance to either a VLAN or an interface?

9. A company has a few servers in a secure, remote location storing highly-confidential documents connected to two AOS-CX 6400 switches configured in a VSX pair The AOS-CX switches perform access control with 802 1X and will be implementing user-based tunneling (UBT) so that Aruba gateway application inspection and stateful firewall policies can be applied to the traffic. The gateways are running version 84 and implement the AP, PEF, and RFP licenses

Which licensing is needed for the two AOS-CX switches?

10. When cutting and pasting configurations into NetEdit, which character is used to enter commands within the context of the previous command?

11. An administrator will be replacing a campus switching infrastructure with AOS-CX switches that support VSX capabilities. The campus involves a core, as well as multiple access layers.

Which feature should the administrator implement to allow both VSX-capable core switches to process traffic sent to the default gateway in the campus VLANs?

12. What is a best practice concerning voice traffic and dynamic segmentation on AOS-CX switches?

13. What is correct regarding the tunneling of user traffic between AOS-CX switches and Aruba Mobility Controllers (MCs)?

14. A network administrator needs to replace an antiquated access layer solution with a modular solution involving AOS-CX switches. The administrator wants to leverage virtual switching technologies. The solution needs to support high-availability with dual-control planes.

Which solution should the administrator implement?

15. Examine the attached exhibit.

The network administrators is trying to add a remote location as area 3 to the network shown in the diagram.

Based on current connection restrictions, the administrator cannot connect area 3 directly to area 0. The network is using AOS-CX switches.

Which feature should the administrator implement to provide connectivity to the remote location?

16. A network engineer is setting up BGP on AOS-CX switches. The engineer is establishing two different eBGP peering’s to two different service providers. The engineer has dozens of contiguous C-class public networks that need to be advertised to the two service providers. The engineer manually defines the networks to be advertised individually with the "network" command.

How can an administrator advertise only a summarized route to the two service providers?

17. A network administrator is implementing a configuration plan in NetEdit. The administrator used NetEdit to push the configuration plan to the switch.

Which option in the NetEdit planning section should the administrator select to save the configuration running on the switch to the startup-config?

18. When implementing deficit weighted round robin queuing, what importance does the weight value have?

19. Examine the network exhibit.

A network administrator is implementing OSPF on a VSX pair of aggregation switches: Agg1 and Agg2. VLANs 10 and 20 are connected to layer-2 access switches. Agg-1 and Agg-2 are configured as the default gateway for VLANs 10 and 20, with active gateway enabled.

What is the best practice for configuring OSPF on the aggregation switches and their connection to the Core switch?

20. Examine the commands entered on an AOS-CX switch:

What is true regarding this configuration for traffic received on interface 100?

21. Which concept is implemented using Aruba’s dynamic segmentation?

22. What would prevent two OSPF routers from forming an adjacency? (Select two.)

23. Which protocols are used by NetEdit to interact with third-party devices? (Choose two.)

24. A customer has twenty AOS-CX switches that will be managed by NetEdit and would like support for NetEdit these switches will exist in the network for at least five years.

Which type of licensing should be used by this customer?

25. In AOS-CX switching, what determines when a frame is forwarded by the switch between the ingress and the egress port?

26. How should a network administrator add NAE scripts and implement NAE agents that will run on an AOS-CX switch?

27. Examine the attached diagram.

The two PCs are located in VLAN 11 (10.1.11.0/24).

Which example defines how to implement active gateway on the VSX core for VLAN 11?

28. A network administrator is implementing OSPF, where there are two exit points. Each exit point has a stateful, application inspection firewall to implement company policies.

What would the best practice be to ensure that one firewall will see both directions of the traffic, preventing asynchronous connections in the network?

29. When an AOS-CX switch uses a temporary copy of the Configuration State database, what kind of analysis does NetEdit perform to ensure that the configuration is correct?

30. An administrator will be deploying NetEdit to manage an Aruba solution.

What does NetEdit support?

31. An administrator is replacing the current access switches with AOS-CX switches. The access layer switches must authenticate user and networking devices connecting to them. Some devices support no form of authentication, and some support 802.1X. Some ports have a VoIP phone and a PC connected to the same port, where the PC is connected to the data port of the phone and the phone’s LAN port is connected to the switch.

Which statement is correct about this situation?

32. A network administrator is tasked to set up BGP in the company's network. The administrator is defining an eBGP peering between an AOS-CX switch and a directly-connected service provider.

The administrator has configured the following on the AOS-CX switch:

However, when using the "show bgp all summary" command, the state does not display "Established" for the eBGP peer.

What must the administrator configure to fix this issue?

33. An administrator is managing a pair of core AOS-CX switches configured for VSX. Connected to this core are pairs of aggregation layer AOS-CX switches configured for VSX. OSPF is running between the aggregation and core layers. To speed up OSPF convergence, the administrator has configured BFD between the core and aggregation switches.

What is a best practice the administrator should implement to reduce CPU processing on the switches if a BFD neighbor fails?

34. Examine the AOS-CS switch output:

Based on this output, what is correct?

35. A switch will apply a device profile to a port based on which pieces of information? (Select two.)

36. A company is implementing AOS-CX switches at the access layer. The company wants to implement access control for employees and guests.

Which security features will require a ClearPass server to be installed and used by the company?

37. What is correct regarding policy-based routing?

38. An administrator is managing a network comprised of AOS-CX switches deployed at the aggregation layer. The switches are paired in a VSX stack and run the OSPF routing protocol. The administrator is concerned about how long it takes for OSPF to converge when one of the VSX switches has to reboot.

What should the administrator to do speed up the OSPF convergence of the switch that is rebooting?

39. An administrator of a company has concerns about upgrading the access layer switches. The users rely heavily on wireless and VoIP telephony.

Which is the best recommendation to ensure a short downtime for the users during upgrading the access layer switches?

40. An administrator wants to implement a virtual switching technology that implements a single control-plane solution.

Which S-CX switches would meet these criteria?