Real RCNI Dumps (V8.02) – Designed to Build Your Confidence and Ensure Comprehensive RUCKUS Certified Networking Implementer Exam Preparation

1. ICX reserves some VLAN IDs for system functions.

How many VLAN IDs are reserved?

2. A Wi-Fi access point is configured for management traffic on the default VLAN and a guest SSID on VLAN 10. The access point is connected to port 1/1/10.

What is the correct configuration?

A) vlan 1

no tagged ethernet 1/1/10

!

vlan 10

untagged ethernet 1/1/10

B) vlan 1

no untagged ethernet 1/1/10

!

vlan 10

tagged ethernet 1/1/10

C) vlan 10

tagged ethernet 1/1/10

D) vlan 10

no untagged ethernet 1/1/10

3. Which configuration steps will add untagged ethernet ports 1/1/1 and 1/1/2 and tagged ethernet port 1/2/1 to VLAN 10?

4. Which device will become the root in the Spanning Tree election process?

5. The root bridge is connected to another switch over two independent 10Gbe links.

Which link will remain in a forwarding state on both sides?

6. Which two commands display Power over Ethernet (PoE) power budget? (Choose two.)

7. As an IP packet is routed across subnets, which value gets updated at each hop?

8. What is the highest Power over Ethernet (PoE) power class supported by 802.3bt?

9. Which function is performed by ARP protocol?

10. What are two features of Open Shortest Path First (OSPF)? (Choose two.)

11. Which command must be configured at the interface level to honor Differentiated Services Code Point (DSCP)-based Class of Service (CoS) on a ICX7750?

12. What are two differences between Class of Service (CoS) and Differentiated Services Code Point (DSCP)? (Choose two.)

13. Which two ICX switch models are recommended for collapsed aggregation and core network designs? (Choose two.)

14. Which ICX model can run silently in fanless mode?

15. A customer required an access switch with a Power over Ethernet (PoE) budget not to exceed 240W. They also require the switch to make no fan noise.

Which ICX switch would fit these requirements?

16. If a customer needs to implement VRRP-E on their ICX7550 units, which license needs to be applied to enable this feature?

17. Which ICX model has eight integrated QSFP28 ports?

18. Which three factors must be considered when ordering a replacement power supply for an ICX7650? (Choose three.)

19. Which switch cannot exceed a maximum of 30W per port?

20. Which switch model provides the most 100Gb ports?