Nutanix NCP-MCI-5.15 Dumps Questions V10.02 Are Available With Real Questions & Answers

1. AHV IPAM assigns an IP address from the address pool when creating a managed VM NIC.

At which two instances does the address release back to the pool? (Choose two)

2. In Nutanix clusters, which feature ensures VMs can be migrated and restarted on another host in case of failure?

3. What is the expected operation during node addition when the new node has a different AOS version?

4. Which change can be made on a cluster with software-based Data-at-Rest Encryption enabled?

5. A guest VM should be able to tolerate simultaneous failure of two nodes or drives.

What are the minimum requirements for the Nutanix cluster?

6. When creating a VM on an AHV cluster, how is the initial placement of the VM determined?

7. CPU utilization climbs above 90% on several VMs. This causes performance degradation for a business-critical application.

How can alerts be configured to notify the administrator before VM CPU utilization hits 90%?

8. An administrator logs in to Prism Element goes to the Network view, and sees the output shown in the exhibit.

Which three steps must the administrator take to increase throughput to the host? (Choose three.)

9. What is the expected behavior of the VMs residing on that host when a controller VM becomes unavailable?

10. How many SSL certificates are used by Prism Element on a Nutanix cluster?

11. Which two access protocols are supported by Files? (Choose two.)

12. Prism Central will be installed manually on an AHV cluster.

Which three disk images must be downloaded from the portal for the Prism Central VM? (Choose three.)

13. What is the default network bond setting for an AHV host configuration?

14. What is Prism Central primarily used for?

15. An administrator has been alerted to a VM that has high I/O latency and wants to determine if there are any other factors, such as insufficient network or memory resources that correlate, as part of a troubleshooting process.

Which type of chart should the administrator create to allow all relevant data to be easily exported to CSV for later analysis?

16. Where should an administrator unregister Prism Element from Prism Central?

17. Refer to Exhibit.

An administrator increases the cluster RF to 3. The containers are not modified.

What will the new values in the data resiliency dashboard be for FAILURES TOLERABLE for the Zookeeper and Extent Groups components?

18. Where are Leap Availability Zones configured?

19. The customer is seeing high memory utilization on a mission critical VM. Users report that the application is unavailable. The guest OS does not support hot add components.

How should the administrator fix this issue?

20. Which two private key types are supported by the Nutanix SSL certificate implementation? (Choose two.)

21. An administrator wants to have a VM on an AHV cluster with access to multiple VLANs .

What is the most efficient way to achieve this?

22. An administrator is configuring data protection and DR for a multi-tier application. All VMs must be protected at the same time.

What must the administrator do to meet this requirement?

23. Refer to the exhibit.

System Non-Root Partition Usage shows a warning or critical alert. The administrator needs to change the frequency of checks and alerts to respond more quickly.

Where in Prism Element should the administrator change the frequency of checks and alerts?

24. An administrator is adding a node with a higher AOS release to an existing cluster.

What is the most efficient action an administrator should take to ensure it is in a supported state?

25. An administrator is configuring cross-hypervisor DR from an ESXi cluster to a new AHV cluster. When the administrator migrates a protection domain to the AHV cluster, the VMs fail to boot.

What should the administrator do to correct this problem?

26. Which component ensures uniform distribution of data throughout the cluster to eliminate hot spots and speed up rebuilds?

27. An administrator wants to use Volumes to connect to physical servers that are not able to be virtualized.

Which three things must be configured for Volumes to support iSCSI clients? (Choose three)

28. An administrator responsible for a VDl environment needs to investigate reports of slow logins. The administrator finds that increasing the number of vCPUs from 2 to 4 will reduce the login times. Production workloads are consuming 75% of the host CPU on the cluster. The administrator increases the vCPU count on all of the VDl VMs.

What are two impacts on the cluster? (Choose two)

29. An administrator is reviewing performance of a core banking system that routinely has 20,000 concurrent users. During business hours, the CPU on the applications servers runs at close to 100%. The administrator needs to determine if there is a performance issue specific to the app servers, the database servers, or all servers on the cluster.

Which metrics should the administrator review in Prism Analytics Graphs?

30. An administrator needs to relocate an AHV cluster to a new datacenter during a maintenance window. The cluster will use the same IPs in the new datacenter.

Which two steps should be taken to prepare for this task? (Choose two.)

31. Which three configuration scenarios are valid for the deployment of Prism Central? (Choose three.)

32. A two-node ROBO cluster is configured with a witness VM.

What happens when Node A goes down?

33. What is the name of the internal bridge used by AHV nodes and CVMs?

34. HOTSPOT

What is the proper sequence to perform a one-click upgrade to a Nutanix cluster?

Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the drop-down option.

35. Which two capabilities does IPAM provide in a Nutanix networking configuration? (Choose two.)

36. In Files, how many FSVMs are deployed by default?

37. An administrator needs to run a mixed Exchange and SQL workload with a guaranteed amount of container space for each application.

How should the administrator meet this requirement?

38. A customer has a 24-node cluster with all containers configured with RF3. Two different nodes have incurred a simultaneous HDD failure.

What is the result?

39. An administrator migrates a VM onto a new Nutanix cluster- After the migration, the administrator observes the following conditions:

• Cluster memory utilization: 64%

• Cluster CPU utilization: 19%

• Cluster storage utilization. 32%

• Average VM CPU utilization: 25%

• Average VM CPU ready%: 24%

• Average VM memory utilization: 60%

Which two changes should the administrator make to improve VM performance? (Choose two.)

40. An administrator wants to create a trunked interface on a VM on AOS 5.15x.

Which two steps should the administrator take first to achieve this? (Choose two)

41. An administrator notices that most of the VMs in the cluster are on one host. Users report that an application seems to respond slowly. The application server VM has significantly more memory assigned to it than other VMs.

How should the administrator fix this issue?

42. What are two minimum prerequisites for live migration to succeed? (Choose two.)

43. When configuring Prism Central, which two log modules are able to forward messages to an external syslog server? (Choose two.

44. How should an administrator enable secure access to Volumes using a password?

45. HOTSPOT

An administrator needs to shut down an AHV cluster to relocate hardware. The administrator upgrades NCC and runs health checks.

Which steps should the administrator perform next?

Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements.

46. Which node type does not deploy a Nutanix Controller VM?

47. How will an HDD failure affect VMs with data on the failed device?

48. In which two scenarios is an automated live migration likely to occur? (Choose two)

49. How should an administrator configure a custom alert for a specific VM in Prism?

50. Where can an administrator change a CVM password?

51. An administrator needs to report on any alerts generated by a Nutanix cluster that affected the cluster's availability over the past 10 days.

Which method should be used to locate these events?

52. An Administrator is working on a one-node ROBO cluster configurations

Which statement is true for this configuration?

53. What requires iSCSI initiator configuration in the guest OS to use Volumes?

54. Which three cluster operations require an administrator to reclaim licenses?(Choose three)

55. Which data savings technique utilizes stripes and parity calculation in a Nutanix cluster?

56. When installing Nutanix Guest Tools (NGT) on an ESXi-hosted VM, which port should be enabled on the VM to allow communication with the NGT-Controller VM service?

57. The administrator wants a container to be displayed and limited to 1TB in the hypervisor.

What advanced container setting must the administrator set?

58. Which three upgrades should an administrator be able to perform using Lifecycle Management? (Choose Three)

59. A configuration is single domain, single forest, and does not use SSL.

Which port number should be used to configure LDAP?

60. A customer wants to isolate a group of VMs within their Nutanix environment for security reasons. The customer creates a VM with two NICs to act as a firewall and installs the appropriate software and certificates.

However, no one from the outside can access the application.

What is the likely cause of this problem?

61. An administrator has set up a local web server accessible to the Nutanix clusters.

Which two steps are required to set up LCM for an environment without Internet access? (Choose two.)

62. An administrator needs to boot a VM to a bootable CD. The administrator tries to configure the VM to boot to it, select to add disk, and goes to the images available. The image for the bootable CD is unavailable.

What is the Likely issue?

63. Which algorithm do snapshots and clones leverage to maximize efficiency and effectiveness?

64. A VM in a 12-node Nutanix cluster is hosting an application that has specific Physical GPU requirements. Only three nodes in the cluster meet this requirement.

The administrator wants to allow a general workload to be distributed across all nodes in the cluster and must make sure that the node hosting the VM meets its requirements.

How should the administrator perform this task?

65. In which two scenarios is Native Key Management Server supported? (Choose two)

66. HOTSPOT

Async DR is configured between two sites. A network outage occurs at the primary site.

Which steps must the administrator perform to bring the VMs back into service at the backup site?

Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the drop-down option.

67. What is the function of the virbr0 bridge on AHV?

68. The Linux administration team has requested access rights to any current or future Linux VM in the environment

What entity should be selected when assigning this new role?

69. A cluster has RF2. The cluster loses two drives on different nodes in the same storage tier.

What is the effect on the replicas of the VMs?

70. An administrator is working with Nutanix Support and needs to provide logs for troubleshooting an issue. The cluster is located in a secure environment. Data such as IP addresses and VM names cannot be shared.

Which method should be used to anonymize the log data sent to Nutanix Support?

A)

B)

C)

D)

71. A node with Erasure Coding fails.

What is the impact?

72. An administrator is reviewing performance of a core banking system that routinely has 20,000 concurrent users. During, business hours, the CPU on the applications servers runs at close to 100%. The administrator needs to determine if there is a performance issue specific to the app servers, the database servers, or all servers on the cluster.

Which metrics should the administrator review in Prism Analysis Graphs?

73. An administrator adds a node with older generation processors to an existing AHV cluster with newer generation processors .

What is the effect on live migration?

74. How should an administrator correct an SSL error when connecting to a Nutanix cluster?

75. An administrator is commissioning a Nutanix Enterprise Cloud. Once the user VMs have been deployed and are running, the administrator finds that VMs on the same host are able to communicate, but are unable to communicate between hosts.

What must be changed to enable full inter-VM communications?

76. A vDisk is read by multiple VMs. The cluster creates immutable copies of the vDisk .

What are these vDisk copies called?

77. An administrator is implementing a VDI solution. The workload will be a series of persistent desktops in a dedicated storage container within a four-node cluster Storage optimizations should be set on the dedicated storage container to give optimal performance including during a node failure event.

Which storage optimizations should the administrator set to meet the requirements?

78. A customer has a newly-deployed AHV cluster with nodes that have 2.x 10 GBE and 2.x interface. The customer wants to use all available network interfaces to provide connectivity to the VMs.

Which option should the administrator use to achieve this while remaining consistent with Nutanix recommendations?

79. Which method can be used to migrate a VM configured for UEFI-boot from a Nutanix Hyper-V cluster to AHV?

80. An administrator needs to bring down a host in a Nutanix Cluster for maintenance reasons.

The administrator puts the host in maintenance mode.

What should the administrator do to perform an orderly shutdown of the CVM?

81. Refer to the exhibit.

The Linux Admin role has been created to manage only Linux VMs in the environment.

However, the Admin1 user does not have access to all Linux VMs.

What step should be taken to grant the proper access?

82. An administrator has a Custom backup application that requires a 2TB disk and runs m Windows. Throughput is considerably lower than expected.

The application was installed on a VM with the following configuration:

• FOU vCPUs with one core/vCPU

• 4GB of Memory

• One 50GB vDisk for the Windows installation

• One 2TB vDisk for the application

What is the recommended configuration change to improve throughput?

83. How many Prism Central instances are required to deploy Leap:'

84. Which two methods are available when migrating a VM from a legacy 3-tier solution using VMware ESXi to AHV? (Choose two.)

85. The Stargate service becomes unavailable on a single CVM on an AHV node .

What is used to maintain I/O operations in the cluster?

86. A system administrator needs to add more VMs to their Nutanix cluster.

Which two actions should the administrator perform to determine if the current cluster can accommodate the new VMs? (Choose two)

87. Which command should an administrator run from the CLI to view the uplink state of all AHV nodes in the cluster?

88. When VM HA Reservation is enabled, what is the expected behavior for all failed VMs in the event of a host failure?

89. In a default configuration of an AHV cluster, a single node fails.

What happens to the running VMs on that node?

90. Microsegmentation was recently enabled in a Nutanix environment. The administrator wants to leverage Prism Central to create a policy that will block all traffic regardless of direction, between two groups of VMs identified by their category.

Which policy should be used to meet this requirement?

91. An administrator needs to deploy an application with a large amount of data connected via Nutanix volumes.

Which two actions should the administrator take when designing the Volume Group? (Choose two.)

92. A Nutanix cluster is equipped with four nodes. Four VMs on this cluster have been configured with a VM-VM anti-affinity policy and are each being hosted by a different node.

What occurs to the cluster and these VMs during an AHV upgrade?

93. Which best practice should be followed when creating a bond in a Nutanix cluster?

94. A customer has a 4-node cluster running at 80% capacity. One node fails due to a motherboard issue.

What is the effect?