NSE8_812 Dumps Updated – Choose NSE8_812 Dumps (V9.02) from DumpsBase to Prepare for the Fortinet NSE 8 – Network Security Expert 8 Written Exam

Do you know the Fortinet Certified Expert (FCX) Cybersecurity certification? It recognizes your comprehensive knowledge of network security design, configuration, and troubleshooting for complex networks. To complete this FCX Cybersecurity certification, you must pass two exams:

  • FCX written exam – NSE 8 – Network Security Expert 8 Written Exam (NSE8_812)
  • FCX practical exam – NSE 8 – Network Security Expert 8 Practical Exam (NSE8_870)

No prerequisite for taking the FCX written exam NSE8_812, but you must take it before you can take the NSE8_870 FCX practical exam. If you are preparing for the NSE8_812 exam, you can come to DumpsBase to choose the updated dumps as the learning materials. The current version of NSE8_812 dumps is V9.02, which are comprehensive study materials designed to help you prepare for the Fortinet NSE 8 – Written Exam. These updated NSE8_812 exam dumps typically include practice questions and answers that cover the FCX written exam content areas. Generally, the NSE8_812 exam dumps can be a valuable tool in your Fortinet Certified Expert (FCX) Cybersecurity certification journey, providing targeted practice and boosting your confidence.

Fortinet Certified Expert (FCX) Cybersecurity Written Exam NSE8_812 Free Dumps

1. Review the VPN configuration shown in the exhibit.

What is the Forward Error Correction behavior if the SD-WAN network traffic download is 500 Mbps and has 8% of packet loss in the environment?

2. You are running a diagnose command continuously as traffic flows through a platform with NP6 and you obtain the following output:

Given the information shown in the output, which two statements are true? (Choose two.)

3. Which two methods are supported for importing user defined Lookup Table Data into the FortiSIEM? (Choose two.)

4. What is the benefit of using FortiGate NAC LAN Segments?

5. You are troubleshooting a FortiMail Cloud service integrated with Office 365 where outgoing emails are not reaching the recipients' mail.

What are two possible reasons for this problem? (Choose two.)

A. The FortiMail access control rule to relay from Office 365 servers FQDN is missing.

B. The FortiMail DKIM key was not set using the Auto Generation option.

C. The FortiMail access control rules to relay from Office 365 servers public IPs are missing.

D. A Mail Flow connector from the Exchange Admin Center has not been set properly to the FortiMail Cloud FQDN.

6. Refer to the exhibit.

FortiManager is configured with the Jinja Script under CLI Templates shown in the exhibit.

Which two statements correctly describe the expected behavior when running this template? (Choose two.)

7. SD-WAN is configured on a FortiGate. You notice that when one of the internet links has high latency the time to resolve names using DNS from FortiGate is very high.

You must ensure that the FortiGate DNS resolution times are as low as possible with the least amount of work.

What should you configure?

8. Refer to the exhibits.

Exhibit A

Exhibit B

Exhibit C

A customer is trying to set up a VPN with a FortiGate, but they do not have a backup of the configuration. Output during a troubleshooting session is shown in the exhibits A and B and a baseline VPN configuration is shown in Exhibit C Referring to the exhibits, which configuration will restore VPN connectivity?

A)

B)

C)

D)

9. An HA topology is using the following configuration:

Based on this configuration, how long will it take for a failover to be detected by the secondary cluster member?

10. Refer to the exhibit.

You have deployed a security fabric with three FortiGate devices as shown in the exhibit. FGT_2 has the following configuration:

FGT_1 and FGT_3 are configured with the default setting.

Which statement is true for the synchronization of fabric-objects?

11. Refer to the exhibit.

You are operating an internal network with multiple OSPF routers on the same LAN segment. FGT_3 needs to be added to the OSPF network and has the configuration shown in the exhibit. FGT_3 is not establishing any OSPF connection.

What needs to be changed to the configuration to make sure FGT_3 will establish OSPF neighbors without affecting the DR/BDR election?

A)

B)

C)

D)

12. A retail customer with a FortiADC HA cluster load balancing five webservers in L7 Full NAT mode is receiving reports of users not able to access their website during a sale event. But for clients that were able to connect, the website works fine.

CPU usage on the FortiADC and the web servers is low, application and database servers are still able to handle more traffic, and the bandwidth utilization is under 30%.

Which two options can resolve this situation? (Choose two.)

13. Refer to the CLI output:

Given the information shown in the output, which two statements are correct? (Choose two.)

14. Refer to the exhibit.

You are deploying a FortiGate 6000F. The device should be directly connected to a switch. In the future, a new hardware module providing higher speed will be installed in the switch, and the connection to the FortiGate must be moved to this higher-speed port.

You must ensure that the initial FortiGate interface connected to the switch does not affect any other port when the new module is installed and the new port speed is defined.

How should the initial connection be made?

15. Which feature must you enable on the BGP neighbors to accomplish this goal?

16. Refer to the exhibit, which shows a Branch1 configuration and routing table.

In the SD-WAN implicit rule, you do not want the traffic load balance for the overlay interface when all members are available.

In this scenario, which configuration change will meet this requirement?

17. Refer to the exhibits.

An administrator has configured a FortiGate and Forti Authenticator for two-factor authentication with FortiToken push notifications for their SSL VPN login. Upon initial review of the setup, the administrator has discovered that the customers can manually type in their two-factor code and authenticate but push notifications do not work

Based on the information given in the exhibits, what must be done to fix this?

18. Refer to the exhibit.

A customer has deployed a FortiGate 300E with virtual domains (VDOMs) enabled in the multi-VDOM mode. There are three VDOMs: Root is for management and internet access, while VDOM 1 and VDOM 2 are used for segregating internal traffic. AccountVInk and SalesVInk are standard VDOM links in Ethernet mode.

Given the exhibit, which two statements below about VDOM behavior are correct? (Choose two.)

A. You can apply OSPF routing on the VDOM link in either PPP or Ethernet mode

B. Traffic on AccountVInk and SalesVInk will not be accelerated.

C. The VDOM links are in Ethernet mode because they have IP addressed assigned on both sides.

D. Root VDOM is an Admin type VDOM, while VDOM 1 and VDOM 2 are Traffic type VDOMs.

E. OSPF routing can be configured between VDOM 1 and Root VDOM without any configuration changes to AccountVInk

19. You are responsible for recommending an adapter type for NICs on a FortiGate VM that will run on an ESXi Hypervisor. Your recommendation must consider performance as the main concern, cost is not a factor.

Which adapter type for the NICs will you recommend?

20. You are deploying a FortiExtender (FEX) on a FortiGate-60F. The FEX will be managed by the FortiGate. You anticipate high utilization. The requirement is to minimize the overhead on the device for WAN traffic.

Which action achieves the requirement in this scenario?

A. Add a switch between the FortiGate and FEX.

B. Enable CAPWAP connectivity between the FortiGate and the FortiExtender.

C. Change connectivity between the FortiGate and the FortiExtender to use VLAN Mode

D. Add a VLAN under the FEX-WAN interface on the FortiGate.


 

 

 

Fortinet NSE5_FSM-6.3 Dumps (V9.02) - The Most Updated Study Materials to Help You Pass the Fortinet NSE 5 - FortiSIEM 6.3 Exam
Real FCP_FAZ_AD-7.4 Dumps (V8.02) - A Comprehensive Guide to Help You Pass the FCP - FortiAnalyzer 7.4 Administrator Exam Successfully

Add a Comment

Your email address will not be published. Required fields are marked *