New D-NWR-DY-01 Dumps (V8.02) Are Available for Achieving Your Dell NetWorker Deploy Version 2 Certification

1. A Dell EMC NetWorker storage node is connected to a Data Domain system with a virtual tape library (VTL) configured.

Which type of device should be configured on NetWorker for this VTL on Data Domain?

2. You are implementing an EMC NetWorker backup solution for a Microsoft SharePoint 2010 distributed farm. The customer has indicated that a SharePoint granular level recovery is required.

Which backup solution needs to be implemented?

3. In a Dell EMC NetWorker backup environment, server parallelism is set to '8'. There are eight clients and each client has one save set. There are two devices in the backup pool and each device is accessible to all clients. Max sessions is set to ‘2’ for both devices.

How many save sessions will be directed to each device?

4. An EMC NetWorker customer uses a custom schedule for backups and has disabled auto start in all save groups. Backup reports indicate that a bootstrap backup occurs after each save group is run.

What can you do to ensure that only one bootstrap backup occurs daily?

5. When adding an EMC NetWorker server's name into the /nsr/res/servers file of a client, which service must be restarted on the client for the change to take effect?

6. A Dell EMC NetWorker administrator is configuring a staging resource to automatically move sets that were saved in the past 7 days to another volume. However, the administrator discovered that no source devices were available.

What is possible reason for this issue?

7. Bootstrap save set is cloned.

8. Which is composed of a single NetWorker server, clients, and storage nodes?

9. You want to perform a single file recovery from an EMC NetWorker NDMP backup of a Celerra NAS device. You are performing this restore from a Windows 2003 NetWorker server.

What recovery must be performed?

10. Which EMC NetWorker database tracks each file in a backup?

11. In Dell EMC NetWorker Module for Microsoft with Hyper-V, how are incremental backups stored on a Data Domain device?

12. You have been tasked to protect a newly configured Microsoft SQL server residing within a two node cluster. The following requirements must be met: Backups must be performed daily. All data must be transmitted over the LAN. Hot backup must be performed automatically regardless of which node the virtual server resides on at the time of backup.

What software is required to achieve this?

13. A client save set is backed up to an EMC NetWorker backup pool and later cloned to a volume in a clone pool.

Which parameter determines when the volume in the clone pool is a candidate for recycling?

14. An EMC NetWorker backup administrator wants to use a single interface to monitor a data protection environment consisting of Avamar, Data Domain, and NetWorker. They are also looking for capacity planning information for the various components in the environment.

Which EMC tool is recommended?

15. A Dell EMC NetWorker backup administrator wants to back up an Oracle database with NMDA.

Where is the Oracle backup level determined?

16. If a NetWorker backup is using a dedicated storage node, what is responsible for storing the tracking information?

17. An EMC NetWorker server has two user defined pools, Pool A and Pool B. Pool A has its "Clients" attribute set to "Client A" while the other attributes are unset. Pool B has its "Groups" attribute set to "sales" and "Levels" attribute set to "full" and other attributes unset.

If a save set is generated from Client A from the "sales" group using a full level backup, which pool will the data be sent to?

18. Be able to recover Microsoft application data from a persistent snapshot.

What is a recommended EMC Networker add-on module?

19. In a Dell EMC NetWorker environment, what does a “T” in the clone flags for the mminfo command output indicate?

20. You have been asked to implement a EMC Networker backup solution with the following requirements:

(1) Leverage Microsoft SQL VDI (Virtual Device Interface) backup API.

(2) Be able to back up SQL database, transaction logs and filegroups.

What is a recommended EMC Networker add-on module?

21. An administrator notes that some tapes are prematurely marked as full.

Which command can be used to fix the issue?

22. An administrator is configuring backups on a client that requires the use of a directive.

Which application-specific module should be specified to ensure specific files are saved regardless of the backup level?

23. A Dell EMC NetWorker backup administrator is deciding between guest-level backups versus NetWorker VMware Protection.

What are the advantages of using NetWorker VMware Protection?

24. What is a consideration when performing a rollback restore with Dell EMC NetWorker Snapshot Management?

25. When creating an EMC NetWorker application-based snapshot, in what order are the steps performed?

26. Which command must be used to create a clone action for the existing workflow?

27. In EMC NetWorker, what is a purpose of the network save and recover job daemon?

28. What is a benefit of performing DD Boost backups with Dell EMC NetWorker Client Direct?

29. You are installing a new EMC NetWorker server and would like alerts to be sent automatically to EMC Support.

What additional component needs to be included as part of this installation?

30. What is a consideration for using the Dell EMC NetWorker block based backup feature?

31. You have a requirement to set up a NAS appliance into the EMC NetWorker environment. You have the remote username and passwords as well as the Fully Qualified Name (FQN) for the device and you wish to ensure that the NetWorker server can see the NDMP devices before the setup.

Which command should be used to do this?

32. When Dell EMC NetWorker is integrated with a Data Domain system with DD Boost, what analyzes the data stored on the Data Domain and sends only the unique data for storage?

33. Which EMC NetWorker command lists save sets stored on each volume?

34. An EMC NetWorker administrator creates a file called “myfile”. The file contains: print type: NSR client.

What is displayed when the command, nsradmin -i myfile, is executed?

35. What is a benefit of performing DD Boost backups with EMC NetWorker Client Direct?

36. What option for cloud backup devices allows to limit the bandwidth that EMC NetWorker consumes for cloud operations during specified periods of time?

37. Which feature of EMC NetWorker allows multiplexed, heterogeneous data to reside on the same tape?

38. A Dell EMC NetWorker backup administrator configured Microsoft Exchange DAG federated backups using NMM with block based backups (BBB). However, the backup failed when attempting to write to AFTDs.

What is the possible reason for the backup failure?

39. What is a characteristic of using EMC NetWorker Snapshot Management?

40. A Dell EMC NetWorker administrator wants to start all NetWorker processes on a Linux server.

Which command should be run?

41. Which backup levels are supported for backup of Oracle databases in an EMC NetWorker environment?

42. What is the key performance tuning feature that determines the amount of multiplexing when writing to a tape device?

43. Which daemon supports remote execution requests for backup requested by EMC NetWorker Management Console?

44. A backup administrator needs to upgrade NVE.

To which folder on the NVE appliance must the upgrade package be copied before starting the upgrade?

45. For EMC NetWorker to communicate to DMZ Clients, what port or ports are required for rpcbind (portmapper) to be running and available through the firewall?

46. Which commands can be used to locate the bootstrap SSID on a backup volume?

47. You have an EMC NetWorker server with one storage node. There is an autoloader with four tape drives. Two drives each are dedicated to the server and storage node. A new Celerra has been added to the network with 500 GB of data.

What must be done to back up the data on the Celerra?

48. An administrator wants to perform a directed recovery using EMC NetWorker.

What is a requirement?

49. To be able to use the EMC NetWorker Management Console remotely, which network ports need to be open?

50. A backup administrator is performing a Block-Based Backup of a RHEL Server and it fails.

What is the cause of the issue?

51. An administrator is backing up a Windows 2008 R2 system using save set ALL with EMC NetWorker version 7.6.2. The administrator notices that no VSS save sets are backed up.

What can be done to back up the VSS save sets?

52. A CloudBoost appliance has been deployed in AWS.

What can be used to configure and manage the CloudBoost appliance?

53. In an EMC NetWorker environment, what is the default retention period for information about completed backups that is contained in the Management Console Database?

54. An EMC NetWorker customer wants to exclude all .jpg files from backups for all Solaris hosts. Backups are initiated from both the client and server.

How should this be enforced?

55. What type of Microsoft SQL VSS backup is supported in NMM?

56. Refer to the Exhibit.

What is the size of the EMC NetWorker synthetic full back up on Saturday?

57. What are the primary types of Dell EMC NetWorker hosts in a datazone?

58. What is the default location of the NMC database on a Linux host?

59. Which type(s) of Dell EMC NetWorker devices need to be created to implement NetWorker integration with Data Domain Cloud Tier?

60. What is a characteristic of the Dell EMC NetWorker RAP database?

61. An Microsoft Exchange server administrator wants to receive a daily e-mail about the backup status of the Exchange server.

Where in the EMC NetWorker Configuration tab can this notification be set?

62. What OS does the NetWorker vProxy Appliance run?

63. An administrator experienced a power failure in their data center. After checking their EMC NetWorker servers, the administrator discovers an error message on one of the nsrd servers.

The error message indicates that themedia database does not exist.

What is the recommended way to fix any corruption in the media database?

64. You want to recover a single file from an EMC NetWorker NDMP backup of a Celerra NAS device. You are performing this restore from a Windows 2003 NetWorker server.

Which recovery must be performed?

65. In a NetWorker environment, a daily scheduled backup was started. However, the volume did not mount, and the backup failed.

What is the reason for the failure?

66. In a Dell EMC NetWorker environment, an administrator is planning a backup strategy for both traditional and module backups.

What should be considered to avoid backing up the same data twice?

67. Which three components comprise EMC NetWorker’s three tier architecture?

68. Which type of backup should be used to back up only the DB2 data that has changed since the last full backup using Dell EMC NetWorker?

69. Which NetWorker component communicates with AD/LDAP?

70. Which method(s) can you use to display a list of unlabeled tape volumes in EMC NetWorker?

71. In EMC NetWorker, which daemon provides the read and write service for the CFI database?

72. What is a characteristic of cloud volumes in EMC NetWorker?

73. The backup of a 2 TB Microsoft Windows file server is exceeding the backup window requirement.

What is the recommended way improve the backup time?

74. How is the Dell EMC NetWorker multi-tenancy facility option enabled?

75. What does the -b option specify in the save command?

76. What is a characteristic of EMC NetWorker SnapImage module backups?

77. Which databases are referred to as tracking databases?

78. What action must be taken before NetWorker can support a bootstrap backup from a Cloud Tier device?

79. Refer to the exhibit.

A Dell EMC NetWorker administrator is monitoring Cloud Tier save sets.

What does the "T" flag in the clone flags column represent?

80. An EMC NetWorker administrator needs to recover a client file index.

What needs to be executed in order toretrieve this information?

81. What is a requirement for a media pool used by CloudBoost devices?

82. You have successfully backed up three SQL servers with EMC NetWorker Module for SQL.

What needs to be done to recover SQL data?

83. An administrator has created a workflow with a protection group consisting of a single Linux client. The client is enabled for block based backups. The workflow has actions to perform a backup to an AFTD device and then a clone to tape.

What is the result when the workflow runs?

84. How does the EMC NetWorker online backup feature work?

85. How does EMC NetWorker respond to an AFTD disk full condition?

86. A backup administrator wants to use an mminfo utility to run a query for several save sets from a NetWorker client running Windows 2019 However, they receive an error that the mminfo executable is not found.

What is the fastest way to resolve this issue?