MS-200 Microsoft Exam Will Retire On Or Around August 31, 2020

1. You have a Microsoft Exchange Server 2013 organization that has the following configurations:

- The forest functional level if Active Directory is Windows Server 2008 R2.

- The domain controllers in Active Directory run Windows Server 2012 R2.

- The Exchange servers run Windows Server 2012 Datacenter.

You plan to upgrade the organization to Exchange Server 2019. You need to ensure that the organization meets the minimum supported requirements for the upgrade.

What should you do?

2. You plan to deploy Microsoft Exchange Server 2019. You need to verify whether the Active Directory environment is prepared for the deployment.

What are two methods to verify whether the Active Directory environment is prepared? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

3. You have a Microsoft Exchange Server 2019 organization that has a database availability group (DAG).

The DAG contains the servers shown in the following table.

You install a new server named File02 that runs Windows Server 2019.

You attempt to add File02 as an alternate witness server, and you receive the following error messages:

You need to ensure that you can configure File02 successfully as the alternate witness server.

What should you do on File02?

4. You have a Microsoft Exchange Server 2019 organization that contains four Mailbox servers and one Edge Transport server. The organization supports hundreds of remote users. You need to block offline access to Outlook on the web for all the users.

What should you do?

5. Your network contains an Active Directory forest. The forest contains two domains named litware.com and exchange.litware.com and a Microsoft Exchange Server 2019 organization.

The relevant servers are configured as shown in the following table.

EX01 and EX02 have Exchange Server 2019 installed and are in a database availability group (DAG) named DAG01. You need to add an additional server to DAG01.

Which server should you add?

6. DRAG DROP

You have a Microsoft Exchange Server 2016 organization. Users access their email by using a URL of https://mail.contoso.com. You are installing a new Exchange Server 2019 Mailbox server to replace an existing Exchange Server 2016 server. You need to secure all the Exchange services by using a certificate. The solution must minimize warnings on client computers.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

7. DRAG DROP

You have a Microsoft Exchange Server 2019 organization that contains a Mailbox server named MBX01. You back up MBX01 by using Windows Server Backup. You need to recover a deleted mailbox. The solution must minimize the impact on other mailboxes.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

8. DRAG DROP

You have a Microsoft Exchange Server 2019 organization that contains two Mailbox servers as shown in the following table.

EX01 fails. You do not know how long it will take to recover EX01.

You need to provide all affected users with the ability to send and receive email as quickly as possible.

How should you complete the PowerShell script? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

9. HOTSPOT

You have a Microsoft Exchange Server 2019 organization named litwareinc.com. The organization publishes Exchange services by using a namespace of mail.litwareinc.com. You deploy a new server named EX10 to the organization. User reports that sometimes they receive warnings about certificate errors when they connect to their mailbox.

The warning message reference is ex10.litwareinc.com.

You need to resolve the issue.

How should you complete the command? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

10. HOTSPOT

You have a Microsoft Exchange Server 2019 organization that contains a Mailbox server named EX01. EX01 contains a mailbox database named MailDB1.

You attach a new hard drive named F to EX01. On drive F, you create a folder named Databases.

You plan to run the following command on EX01.

Move-DatabasePath CIdentity MailDB1 CEdbFilePath

F:DatabasesMailDB1.edb CConfigurationOnly $false

What is the effect of running the command? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

11. HOTSPOT

You have a Microsoft Exchange Server 2019 organization.

You are configuring backups of a server that has a single mailbox database named MDB01. The database file is in a folder named MDB01 on drive E, and the log files that are in a folder named MDB01 on drive F.

You need to back up the server to meet the following requirements:

- Ensure that all the logs truncate automatically after a backup

- Ensure that all the logs replay automatically when restored

- Minimize the amount of storage used for the backups.

Which two items should you select for the backups? To answer, select the appropriate items in the answer area. NOTE: Each correct selection is worth one point.

12. HOTSPOT

You have a Microsoft Exchange Server organization that contains the servers shown in the following table.

Users access their email by using Outlook on the web.

You install Office Online Server in the London and Seattle offices.

You need to ensure that users can view Microsoft Office attachments within Outlook on the web without downloading the attachments. The solution must ensure that the users can open the attachments by using the nearest server that runs Office Online Server.

How should you complete the command? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

13. HOTSPOT

You have three Microsoft Exchange Server 2019 servers named MBX01, MBX02, and MBX03 in a database availability group (DAG) named DAG01. You have a single mailbox database named MDB01 that replicates to all the servers.

All users report that mailbox searches from Outlook on the web return no results. You discover that the mailbox content index on MBX02 has failed. You need to ensure that all the users can search mailboxes successfully by using Outlook on the web. The solution must resolve the issue as quickly as possible.

How should you complete the command? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

14. DRAG DROP

You have data centers in Seattle and Montreal. Each data center has its own Active Directory site.

You deploy Microsoft Exchange Server 2019 to a database availability group (DAG) named DAG01. DAG01 spans both data centers. Each data center contains two Mailbox servers that have Datacenter Activation Coordination (DAC) mode enabled.

A WAN outage prevents communication between the Montreal and Seattle data centers. The outage will last several days. You stop the cluster service on the Mailbox servers in the Seattle data center, and you stop the DAG in the Montreal data center. You need to switch all the Exchange operations to the Seattle data center for a weekend.

How should you complete the PowerShell script? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

15. Your network contains two Active Directory sites named Site1 and Site2. You deploy a new Microsoft Exchange Server 2019 organization that contains a Mailbox server in each site. You need to configure the organization to use a single namespace for Autodiscover.

What should you do?

16. HOTSPOT

Your network contains an Active Directory forest.

The forest contains the servers in the following table.

The dmz.litware.com domain contains mail-enabled user accounts but does not contain any Exchange

servers. You plan to replace the existing Exchange servers with new servers that have Exchange Server 2019 installed.

You need to extend the schema and prepare the Active Directory domains.

What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

17. You have a Microsoft Exchange Server 2019 database availability group (DAG) named DAG1. DAG1 contains a Mailbox server named EX01. EX01 fails and must be replaced. You plan to recover EX01 to a new server. You deploy Windows Server 2019 to a new server that has identical hardware as EX01. You need to restore EX01 to the new server.

What should you do before you restore EX01?

18. You are deploying Microsoft Exchange Server 2019 to two data centers. You need to protect all mailbox content against database corruption. The solution must minimize the recovery time objective (RTO) and the recovery point objective (RPO).

What is the best way to achieve the goal? More than one answer choice may achieve the goal. Select the BEST answer.

19. You are deploying Microsoft Exchange Server 2019 to two data centers in Paris and London. The Paris data center contains a file server named PAR-FILE01 and three Mailbox servers named PAR-MBX01, PAR-MBX02 and PAR-MBX03. The London data center contains a file server named LON-FILE01 and three Mailbox servers named LON-MBX01, LON-MBX02, and LON-MBX03.

You create a database availability group (DAG) that contains all six Mailbox servers and has PAR-FILE01 as a primary witness.

You need to set LON-FILE01 as the alternate witness.

Which cmdlet should you run?

20. You are deploying Microsoft Exchange Server 2019.

You plan to test the performance of the MetaCache Database (MCDB).

You deploy a new Exchange Server 2019 server that has the following configurations:

- Four quad-core Xeon processors

- One 1-Gpbs network adapter

- Four 1-TB hard disk drives (HDDs)

- 256 GB of memory

What should you do to support the MCDB?

21. Your company has two data centers in Berlin and one data center in Toronto. Each data center contains two Microsoft Exchange Server 2019 servers.

You have a database availability group (DAG) that contains all the Exchange servers. Each server contains a copy of all the mailbox databases. Datacenter Activation Coordination (DAC) mode is enabled for the DAG. A power failure causes both data centers in Berlin to become unavailable. You need to ensure that users can access their mailbox as quickly as possible.

Which two cmdlets should you run? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

22. HOTSPOT

Your network contains the subnets shown in the following table.

You have a Microsoft Exchange Server 2019 organization. You need to prevent users in the London office from accessing the Exchange admin center (EAC).

How should you complete the command? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

23. Your company has offices in Montreal and Seattle. Each office has 2,000 users. You are designing a Microsoft Exchange Server 2019 organization that will span both offices. You need to recommend a high-availability solution for mailbox databases. The solution must ensure that high availability is maintained if a single site fails.

Which recommendation best meets the requirements? More than one answer choice may achieve the goal. Select the BEST answer.

24. HOTSPOT

You have a Microsoft Exchange Server 2019 organization.

The recovery options for a user named User1 are configured as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic. NOTE: Each correct selection is worth one point.

25. You have a Microsoft Exchange Server 2019 organization.

You have a database availability group (DAG) that contains the members and databases shown in the following table.

EX01 fails. All users report that they can access their email normally. You resolve the issue on EX01. You need to return the DAG to its original configuration as quickly as possible.

What should you do?

26. You have a Microsoft Exchange Server 2019 organization. You perform a Server Core installation of Windows Server 2019 on a server named EX05. You need to deploy Exchange Server 2019 to EX05.

Which two components should you install before you can install Exchange Server 2019 on EX05? Each

correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

27. HOTSPOT

Your network contains an Active Directory forest named contoso.com. The forest contains five domains. You plan to deploy Microsoft Exchange Server 2019.

You have the administrative accounts shown in the following table.

You need to prepare the forest for Exchange Server 2019.

Which user accounts can you use to perform each task? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

28. You are deploying a new Microsoft Exchange Server 2019 organization.

You plan to create a database availability group (DAG) that will contain four Mailbox servers and a witness server named FS01. FS01 is a file server.

You attempt to provision the DAG by running the following command.

New-DatabaseAvailabilityGroup CName DAG1-WitnessServer FS01

CWitnessDirectory C: DAG1

CDatabaseAvailabilityGroupIPAddresses 10.0.0.10

The command fails. You need to ensure that you can provision the DAG.

What should you do?

29. Your company has a main office and 20 remote offices.

The network contains an Active Directory forest. The forest contains domain controllers that run Windows Server 2012 R2. The forest functional level is Windows Server 2008 R2.

The company has a Microsoft Exchange Server organization. Most servers have Exchange Server 2013 installed. Three servers in the remote offices have Exchange Server 2010 installed.

One quarter of users have voicemail provided by Unified Messaging (UM).

You need to deploy an Exchange Server 2019 database availability group (DAG) to the main office.

Which two actions should you perform to prepare the organization for the DAG deployment? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

30. You have a Microsoft Exchange Server 2019 organization.

You have a database availability group (DAG) that contains the members and databases shown in the following table.

EX01 fails and cannot be repaired within an acceptable timeframe.

You plan to replace EX01 with a new DAG member named EX05. EX05 will host the same databases as EX01.

What should you do first?

31. HOTSPOT

Your company has a Microsoft Exchange Server 2019 hybrid deployment.

Users in the company’s accounting department have on-premises mailboxes. Users in the company’s sales department have mailboxes in Exchange Online.

You need to configure Outlook on the web to meet the following requirements:

- The accounting department users must be prevented from using Outlook on the web.

- The sales department users must be prevented from using Outlook on the web from the Internet.

- The accounting and sales department users must be able to use Outlook Anywhere and Exchange ActiveSync.

Which cmdlet should you run for the users in each department? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

32. You deploy a Microsoft Exchange server named EX01. Users report that they cannot access Outlook on the web by using a URL of https://EX01. You need to ensure that the users can reach their mailbox when they go to https://EX01 in their web browser.

What should you do?

33. DRAG DROP

You have a Microsoft Exchange 2019 server that contains a mailbox database named DB01. DB01 is located on a drive named E. The transaction log files for DB01 are located on a drive named F.

You receive several disk alerts for drive E and suspect that the drive is failing.

You dismount DB01 and verify that the database is in a clean shutdown state.

You create a new mailbox database named DB02 on a drive named G.

You need to ensure that users can connect to their mailbox as quickly as possible.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

34. HOTSPOT

Your network contains an Active Directory forest. The forest contains a single domain named contoso.com.

The forest contains a Microsoft Exchange Server 2019 organization and the sites shown in the following table.

You run the Get-ClientAccessRule cmdlet and you receive the following output:

For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

35. HOTSPOT

You have a Microsoft Exchange Server 2019 organization that contains a database availability group (DAG) named DAG1.

DAG1 is configured for automatic reseeding.

Hardware errors are detected on the spare disks used for reseeding.

You need to prevent the spare disks from being reformatted until the disks are replaced.

Which command should you run? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

36. You have a Microsoft Exchange Server 2019 organization that contains multiple servers. The Exchange organization contains a server named EX01. EX01 contains a mailbox database that uses 200 GB of disk space.

You run the following commands on EX01.

You need to reclaim the available disk space on EX01.

What should you do?

37. You have a Microsoft Exchange Server 2019 organization that uses a namespace of contoso.com.

The organization contains the servers shown in the following table.

You need to ensure that users can connect to their mailbox by using a server name of mail.contoso.com.

How should you configure the serviceBindingInfo attribute for the Autodiscover service?

38. You have a Microsoft Exchange Server 2019 organization.

The help desk reports that it receives a high volume of calls relating to the following issues:

- Automatic replies are not being sent.

- Calendar sharing to external users is malfunctioning.

- Users who use Microsoft Outlook for Mac cannot access their mailbox.

You suspect that there is an issue with Internet Information Services (IIS).

To which IIS virtual directory do the issues relate?

39. HOTSPOT

Your network contains an Active Directory domain named contoso.com.

The domain contains the servers shown in the following table.

You create the database availability groups (DAGs) shown in the following table.

You run the following commands.

For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

40. HOTSPOT

Your network contains an Active Directory domain named contoso.com.

The domain contains the domain controllers shown in the following table.

The domain contains the administrative accounts shown in the following table.

You plan to install Microsoft Exchange Server 2019 by using the setup wizard.

For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

41. Your network contains a Microsoft Exchange Server 2019 server that has two mailbox databases.

You add new hard disk drives (HDDs) to the server. You add a new folder structure to the HDDS.

You need to move the mailbox databases to the new HDDs.

What should you do first?

42. You network contains an Active Directory forest named contoso.com. The forest contains two child domains named north.contoso.com and south.contoso.com. You plan to prepare Active Directory for a new Microsoft Exchange Server 2019 organization. All the domains will host user accounts for the Exchange mailboxes.

An administrator runs Exchange Setup on a domain controller in the forest. You need to ensure that the forest is prepared for Exchange.

What should you verify in the child domains?

43. DRAG DROP

You deploy a standalone Microsoft Exchange Server 2019 Mailbox server. You plan to add new hard drives to the server. You need to move the mailbox databases to the new drives.

Which three actions should you perform in sequence on each server? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

44. DRAG DROP

You have two Microsoft Exchange servers named EX01 and EX02. Both servers are members of a database availability group (DAG) named DAG1. DAG1 contains a database named Database1 that replicates to EX01 and EX02.

EX01 fails and cannot be restored.

You need to replace EX01 and resume the replication of Database1.

You create a virtual machine named EX01 and install the Exchange prerequisites. You reset the computer account of EX01 in Active Directory, and then join EX01 to the domain.

Which five commands should you run in sequence? To answer, move the appropriate commands from the list of commands to the answer area and arrange them in the correct order.

45. You have a Microsoft Exchange Server 2019 organization that contains a server named EX01. You plan to deploy a new Mailbox server named EX05. You need to ensure that a user named User1 can install Exchange Server 2019 on EX05. The solution must

use the principle of least privilege.

Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

46. You company has a Microsoft Exchange Online subscription.

The human resources (HR) department at the company has a shared mailbox named HRMailbox.

Users in the HR department receive the following error message when they attempt to send email messages from HRMailbox.

554 5.2.2 mailbox full;

STOREDRV.Submission.Exception:QuotaExceededException.MapiExceptionQuotaExceeded.

You verify HRMailbox and discover that ProhibitSendQuota is 49.5 GB, and TotalItemSize is 50 GB.

You need to allow the HR department users to send email from HRMailbox.

What should you do first?

47. You have a database availability group (DAG) that has Datacenter Activation Coordination (DAC) mode set to DagOnly.

The DAG is configured as shown in the following table.

A power failure occurs in Site1. You need to mark all the DAG members in Site1 as failed.

Which command should you run?

48. You deploy a new Microsoft Exchange Server 2019 Mailbox server to an existing organization. You create databases for the user mailboxes on the new server.

You attempt to remove the default mailbox database, but you receive an error when you run Remove-MailboxDatabase.

Which three actions should you perform before you can remove the default mailbox database? Each correct answer presents part of the solution NOTE: Each correct selection is worth one point.

49. HOTSPOT

You recently added a Mailbox server named MBX1 to an existing database availability group (DAG). You discover that when user mailboxes are active on MBX1, users cannot view free/busy information.

You run the Get-WebServicesVirtualDirectory cmdlet as shown in the following exhibit.

You need to ensure that the users can access the free/busy information.

What should you do for each virtual directory? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

50. You have a Microsoft Exchange Server 2019 Mailbox server that contains a mailbox database. The database contains mailboxes for 5,000 users.

You create a new mailbox database and move half of the mailboxes to the new database.

You need to reduce the disk space used by the original mailbox database.

What should you do?

51. HOTSPOT

You manage a Microsoft Exchange Server 2019 organization. You add a new domain to the Active Directory forest. You need to ensure that a user named User1 can prepare the domain for the deployment of a Mailbox server.

The solution must use the principle of least privilege. To which Exchange Server role and Active Directory group should you add User1? NOTE: Each correct selection is worth one point.

52. You manage a hybrid deployment of Microsoft Exchange Server 2019 and Microsoft 365. Several Microsoft 365 users collaborate by using OneDrive for Business and Office 365 groups. You need to add several users hosted in Exchange Server 2019 to the Office 365 groups.

Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

53. HOTSPOT

You have three Microsoft Exchange Server 2019 servers named MBX01, MBX02, and MBX03 in a database availability group (DAG) named DAG01. DAG01 contains two mailbox databases named MDB01 and MDB02. Database replication fails on MBX03. You need to update the copy of MDB02 as quickly as possible.

How should you complete the command? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

54. You have a Microsoft Exchange Server 2019 organization that contains 20 Mailbox servers.

You discover that one Mailbox server restarts periodically due to replication errors that trigger a Managed Availability responder.

You need to prevent the restarts from occurring on all the Mailbox servers.

Which cmdlet should you run?

55. Testlet 2

Case Study

This is a case study. Case studies are not timed separately. You can use as much exam time as youwould like to complete each case.

However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.

To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other question on this case study.

At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.

To start the case study

To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.

Overview

General Overview

Litware, Inc. is an international manufacturing company that has 3,000 employees. The company has sales, marketing, research, and human resources (HR) departments. The company is subject to regulatory compliance.

Physical Locations

Litware has a main office in New York and two branch offices in London and Paris.

All offices connect to each other by using a WAN link. The offices can only communicate with each other by using a point-to-point connection. Each office also connects directly to the Internet.

Existing environment

Active Directory

The network contains an Active Directory forest named litware.com. The forest contains a single domain. All domain controllers run Windows Server 2019.

Each office contains three domain controllers. Each office is configured as an Active Directory site.

Microsoft Exchange Server

Litware recently upgraded its entire messaging organization from Exchange Server 2013 to Exchange Server 2019.

The organization now contains the servers shown in the following table.

No changes were made to the organization’s configuration during the transition from Exchange Server 2013 and 2019.

The organization has a database availability group (DAG) that has the following configurations.

Litware standardizes mobile device access by using the iOS platform, the native Apple mail client, and Exchange ActiveSync.

The Exchange organization has the following Send connectors.

Business Model

User accounts are deleted from Active Directory the day after a user’s final date of employment.

Requirements

Business Goals

As often as possible, Litware plans to minimize the legal fees associated with reviewing eDiscovery requests by purging data as quickly as possible.

Planned Changes

Litware plans to implement the following changes to the network:

- Use Messaging Records Management (MRM) to archive all mailbox items that are older than one year.

- The company announces a new partnership with another company named Fabrikam, Inc. Fabrikam also uses Exchange for email messaging. All the Litware users in the Paris office will be required to receive email by using a fabrikam.com email address and must have this email address applied automatically to their mailbox.

Technical Requirements

Litware identifies the following technical requirements for the messaging environment:

- Mobile devices must only sync items from the last 30 days.

- All user data must be wiped from a device reported as lost or stolen.

- Email items in a folder named Audits must be archived after 30 days.

- Users in the sales department must never have the items in their Notes folder archived.

- Whenever possible, email messages sent outside the organization must be routed through the Internet connection of the local office.

- If a WAN link fails, the high-availability architecture of the messaging environment must give preference to the WAN link in the New York office.

Problem statement

A user named User2 reports that their mobile device was stolen.

You need to ensure that all the users in the Exchange organization can connect to their mailbox by using MAPI over HTTP.

Which two cmdlets should you run? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

56. HOTSPOT

You are evaluating the current configuration of the DAG.

For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

57. After a power failure in the London office, users whose mailbox databases are hosted on EX07 report that they cannot access email. You need to restore mailbox access for the affected users as quickly as possible.

What should you do?

58. Testlet 3

Case Study

This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.

To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other question on this case study.

At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next sections of the exam. After you begin a new section, you cannot return to this section.

To start the case study

To display the first question on this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.

Overview

Contoso, Ltd is a company that has retail stores throughout Europe and North America. Contoso has 5,000 employees worldwide.

Contoso has a main office in London. The company has 10 branch offices. In each office, there are 50 managers. There are 100 retail stores in Europe and North America. Each retail store has between five and 20 employees.

Network Infrastructure

Contoso has a data center in each office. All the offices connect to each other by using redundant WAN links. Each office has a high-speed connection to the Internet.

The network contains an Active Directory forest named contoso.com.

All users sign in to their computer by using an Active Directory user account.

Each office contains at least two domain controllers from the contoso.com domain. Each office is configured as an Active Directory site. Each branch office has one site link to the main office.

Planned Changes

Contoso has a legacy mail application. The company plans to replace the application with a Microsoft Exchange Server 2019 organization.

In Exchange Server 2019, all recipients will have an email address that uses a format of [email protected].

Technical Requirements

Contoso has the following technical requirements:

- All mailboxes must be protected by storing one copy in a branch office and another copy in the main office. For the mailboxes in the London office, a copy must be created in a branch office in Birmingham.

- All email sent to external recipients must be delivered by using a local connection to the Internet. If the local connection becomes unavailable, the Internet connection in the main office must be used.

- All users will connect to their mailbox by using Microsoft Outlook 2019. All client connections must be established to a namespace of mail.contoso.com.

- All client connections must be established to a server in the local office, unless that server becomes unavailable.

- The mailboxes of managers must be backed up twice daily. All other mailboxes must be backed up once weekly.

- All email sent between the users in different offices must be routed through the main office.

- Whenever possible, administrative effort must be minimized.

- Whenever possible, costs must be minimized.

- Users who connect to their mailbox by using an Android device must be prevented from using the Outlook app.

- Users who connect to their mailbox by using an iOS device must be prevented from using the Outlook app.

- Users who connect to their mailbox by using a Windows 10 tablet must be able to use Outlook 2019.

Disaster Recovery Requirements

Contoso has the following disaster recovery requirements:

- All users must be redirected automatically to another Mailbox server if a single Mailbox server fails.

- All users must be redirected automatically to another Mailbox server if a single Exchange service fails.

HOTSPOT

You need to configure the virtual directories to meet the technical requirements.

How should you complete the command? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

59. You need to recommend a solution to meet the technical requirements for the managers.

What should you recommend creating for the mailboxes of the managers?

60. You need to recommend a deployment plan that meets the technical requirements for the mailbox databases.

What should you include in the recommendation?