Juniper JN0-104 Dumps V11.02 [Updated August 2022] – Good Materials For Junos, Associate (JNCIA-Junos) Exam Preparation

1. Which protocol is responsible for learning an IPv6 neighbor's IMAC address?

2. Which layer of the OSI model does a router use to make forwarding decisions?

3. You are asked to configure filter-based forwarding

Which routing-instance type would you use?

4. Click the Exhibit button.

Referring to the exhibit, if the router forwards traffic destined for 192.168.77.29, which next

hop will be used?

5. Which statement about the Junos OS forwarding table is correct?

6. Click the Exhibit button.

Which operational mode command in Junos OS produces the output shown in the exhibit?

7. Click the Exhibit button,

You are creating a new routing policy on your Junos device. You are currently receiving

multiple routes within the 10.10. 10.0/24 subnet from the same upstream BGP neighbor.

Your policy should only allow the 10.10. 10.0/24 route and reject all other routes within that

/24 range Referring to the exhibit, which route filter match type would satisfy this requirement?

8. Which step is required when performing a Junos software upgrade?

9. What will the request system configuration rescue save command accomplish?

10. Which two statements about login classes are correct? (Choose two.)

11. Click the Exhibit button

You are capturing logs to troubleshoot an issue with IS-IS; however, the logs are increasing

in size too quickly.

Referring to the exhibit, which configuration statement would solve this problem?

12. You must verify that interface ge-0/0/0.0 is administratively up and that the link is up.

In this scenario, which command will accomplish this task?

13. Which two statements describe firewall filters? (Choose two.)

14. Which statement about the forwarding table is correct?

15. You want to temporarily apply a candidate configuration to the active configuration and

automatically roll back after 10 minutes

In this scenario, which command will accomplish this task?

16. Which command allows multiple users to edit a configuration while conning only their

unique changes?

17. Which statement is true about using custom login class permissions?

18. You are creating a route filter that will match the network address of 192.168.64.0/24

In this scenario, which configuration statement will accomplish this task?

19. Click the Exhibit button.

-- Exhibit C

user@router> restart

^

unknown command.

-- Exhibit --

You are troubleshooting a routing issue on a device running Junos. You receive the error

shown in the exhibit when you attempt to restart the routing process.

Which statement describes the problem?

20. Click the Exhibit button

Referring to the exhibit, what will be the source address for packets egressing et-0/0/34.07

21. A user has entered the sequence of commands shown in the exhibit

At which level of the configuration hierarchy would the user be after typing the exit

command?

22. What are two benefits of class of service (CoS)? (Choose two.)

23. Which two statements describe the RE on Junos OS devices? (Choose two.)

24. Which two statements about the configure exclusive command are correct? (Choose two.)

25. You are asked to configure a Junos device to perform regular configuration backups

Which feature will you configure under the [edit system) hierarchy to accomplish this task?

26. Which two statements about routing policies are correct? (Choose two.)

27. Click the Exhibit button

Referring to the exhibit, which two statements are correct? (Choose two.)

28. Which statement describes the ulst next-hop type that appears in the output of the show

route forwarding-table command?

29. What are two characteristics of UDP? (Choose two.)

30. What are two functions of the PFE? (Choose two.)

31. Which default login class should you select if you want the user to edit configuration files?

32. Click the Exhibit button.

User 1 pings Router C to determine its status.

Which router shown in the exhibit, treats the traffic generated by the ping command as

exception traffic?

33. Which statement regarding transit traffic processing is correct?

34. What are two important steps when upgrading an SRX300 Series device? (Choose two.)

35. Click the Exhibit button

Referring to the exhibit, which statement is correct?

36. Click the Exhibit button

Referring to the exhibit, you are unable to reach devices in the 172.19.25.0/28 subnet.

What should you do to solve this problem?

37. You just received a new factory-default Junos device.

Which two steps must be completed to connect and log in to the device? (Choose two.)

38. A user entered configuration mode and modified the candidate configuration.

In this scenario, what are two results? (Choose two.)

39. Which command will replace the entire candidate configuration with the configuration

stored in the reset. config file?

40. Which statement about the show chassis hardware Command is correct?

41. Click the Exhibit button.

You must apply the policy shown in the exhibit to readvertise BGP routes to OSPF neighbors

Which action will accomplish this task?

42. Which two parameters are considered action modifiers in the firewall filters then statement?

(Choose two.)

43. Which two Juniper Networks products are available in virtual machine (VIM) format?

(Choose two.)

44. Which command allows you to execute operational mode commands while in configuration

mode?

45. 10.10.0/24 IP address.

Which action is required to accomplish this task?

46. Which component is responsible for performing protocol updates and system

management?

47. Click the Exhibit button

Referring to the exhibit, what will happen to traffic that is less than the bandwidth limit from

source address 1.0.0.207

48. Which three connection protocols allow you to gather operational information from the

Junos device? (Choose three.)

49. Click the Exhibit button.

The next hop identified in the static route command is not directly connected to your router.

Referring to the exhibit, what must be added to the command for the static route to work?

50. Click the Exhibit button

A packet destined to the 172.27. 102.65 IP address is received by the ge-0/0/1.0 interface

on your Junos device. The input firewall filter shown in the exhibit is applied to the ge-

0/0/1.0 interface.

Which two actions are performed in this scenario? (Choose two.)

51. Click the Exhibit button.

Referring to the exhibit, which statement is correct?

52. Which operational mode command will provide real-time usage statistics for the ge-0/0/0

interface?

53. By default, which Junos directory contains the primary syslog file?

54. Click the Exhibit button

What is the next-hop interface for traffic destined to 172.19.52.101 as shown in the exhibit?

55. Which statement is true about a virtual router routing instance?

56. Click the Exhibit button.

You have applied the policy shown in the exhibit as an import policy to your BGP group

In this scenario, what will happen when the router receives the 192.168.30.48/32 route?

57. Click the Exhibit button

Which command will solve the problem shown in the exhibit?

58. Which three benefits are made possible by the separation of the control plane and forwarding plane of a Junos device? (Choose three.)

59. Which two statements about exception traffic processing are correct? (Choose two.)

60. You are asked to determine when a Junos device was booted

Which command would you use to obtain this information?

61. A device receives a route update for network 172.19.0.0/16 from two different routing information sources.

In this scenario, which parameter will determine the active route?

62. What information is provided by the show route forwarding-table command?

63. You must recover a device by loading the rescue configuration file.

In this scenario, which command will accomplish this task?

64. Which address correctly represents a valid abbreviation for the 2bfc:0000:0000:0000:0217:0000:fe8c:5c85/128 IPv6 address?

65. Click the Exhibit button

You are connecting to a new device in your network and are presented with the information

and prompt shown in the exhibit

Which three steps must be carried out to edit the configuration on this device? (Choose

three.)

66. Which command causes the Junos OS to temporarily activate a configuration?

67. You must configure the 2bfc:0000:0000:beef:0217:cbff:0000:5c85 IPv6 address on your

device.In this scenario, which three addresses are correct? (Choose three.)

68.

Which command produced the output shown in the exhibit?

69. In which directory the traceoption files stored by default?

70. What are three functions of the RE? (Choose three.)

71. Referring to the exhibit,

Which next-hop interface will be used to reach the 10.21.14.16 destination?

72. Exhibit:

Which statement is correct when traffic is received from 10.10.10.4?

73. The marketing team needs access to a server on subnet 172.0.46.0/24. The next- hop router is 10.0.4.2/30. A static route on their gateway has been configured to accomplish the task. You want to keep the static route from being redistributed into dynamic routing protocols.

Which command will satisfy this requirement?

74. What’s is the minimum system-defined user class required to issue clear commands?

75. 180.192.120/28?

76. How many IP addresses can be configured on a given interface?

77. Which two statements describe a routing policy?

78. What is the name of the volume containing the software and files used for the day-to day

operation of a device using Junos with upgraded FreeBSD?

79. What is the maximum number of configurations, by default, that are recoverable using the

rollback command?

80. When multiple users are editing the configuration on a Junos device, What is the default

behavior when a user issues a commit command?

81. Which statement is correct regarding exception traffic on Junos devices?

82. 16.100.1/24

83. What is the minimum system-defined user class required to issue clear commands?

84. Which keystroke combination allows users to move the cursor to the beginning of the

command line without deleting text?

85. Which parameter would you use to prohibit the redistribution of a static route used for

management traffic?

86. Which two types of traffic are processed by the Routing Engine (RE)?

87. Click the Exhibit button.

Referring to the exhibit, which two statements are correct? (Choose two.)

88. You have entered the command "show log messages | match "error | kernel | panic" which

statement is correct regarding the keywords error, kernel and panic in the output?

89. What statement is true about the orlonger route-filter match type?

90. Host A is communicating with Host B through a Layer 2 switch.

What is the highest layer that the switch will inspect the traffic in this scenario?