HPE0-J68 Dumps Updated (V11.02) – DumpsBase Gives You the Right Preparation Guide for HPE Storage Solutions Exam Preparation

1. Refer to the exhibit.

You are configuring a new HPE array and verifying properties of a set of volumes.

Which RAID level is used on the VMwareDatastores-GF volume?

2. You have proposed that a customer replace their legacy SAN switches with new?-Series switches. They are concerned about the management of all the devices, so you have included SANnav in the proposal.

What are the benefits of SANnav that you should emphasize to this customer? (Choose two.)

3. A customer has completely virtualized their datacenter with VMware. You propose a SimpliVity solution to replace their aging hardware.

Which SimpliVity features should you emphasize in your presentation? (Choose two.)

4. You want to deploy Recovery Manager Central to a customer environment.

How can you accomplish this? (Choose two.)

5. A customer uses Veeam to backup their entire datacenter.

Which Veeam feature allows them to recover a single email from their Exchange server?

6. Refer to the exhibit.

You are designing a new Primera solution and demonstrating performance numbers to the customer. The customer reviews the configuration and requests a change to the configuration that will increase Random Write IOPS.

Which action will satisfy the customer request?

7. Which of the following are part of the SimpliVity Data Virtualization Platform architecture? (Choose two.)

8. A customer is implementing a new high performance database environment.

What type of storage should you recommend?

9. You are designing a new enterprise array solution. The customer is interested in a caching tier that provides extremely low-latency and persistent storage at the same time. They also need to support more

than 500GB.

Which technology should you recommend?

10. A customer is implementing an SAP HANA environment and is looking for an alternative to an entirely in-memory database.

Which storage technology should you recommend?

11. HOTSPOT

You need to create an N:M relationship between VMware hypervisors and virtual volumes with the least amount of administrative overhead.

Click the option where you can create a group of VMware hypervisors for volumes provisioning.

12. Which tool is used to determine current compaction ratios on Primera arrays?

13. A customer wants to make a full copy replica of a database to use for performance testing.

Which technology should they use to create the copy?

14. A customer implemented the HPE StoreEver MSL6480 Tape Library.

Which HPE Software can the system administrator use to check the health of the library and monitor its utilization?

15. A customer environment includes:

10 DL380 Gen8 servers in a VMware Cluster

2 MSA storage arrays

2 8GB b-series fibre channel switches

The customer needs to replace their environment because it is end of life. They have limited budget. The customer is primarily concerned with management because they have limited IT staff, and they want to move away from fibre channel.

Which HPE Storage should you recommend?

16. You are designing an HPE MSA iSCSI for a customer.

Which components are typically part of the solution? (Choose two.)

17. A customer is planning to upgrade their HF40 controllers to support additional I/O requirements.

To which model can they upgrade to meet their new requirements?

18. HOTSPOT

A customer has a Nimble HF40 and needs to create a support ticket.

Click the option in the InfoSight portal where the customer can perform this task.

19. A customer is planning to replace their existing LTO-6 tape library with a new HPE StoreEver MSL2024 tape library. They want to reuse their existing LTO-6 tape cartridges for reads and writes.

What is the latest tape drive technology that will provide backward compatibility?

20. DRAG DROP

Refer to the exhibit.

You create two snapshots of a thin provisioned base volume in an HPE Primera. One snapshot is read only and the other is read-write. A write occurs at the location shown in in the diagram. Place the actions on the left into the order they are taken on the right.

21. A customer asks you for a recommendation on setting up their new StoreOnce appliance. They plan to use NetBackup and need the highest performance setup they can get. Their local hosts are connected

via FC and the rest are connected via a WAN.

Which backup target type should you recommend?

22. HOTSPOT

You are handing over the installed array to customer. The customer wants to review the amount of HDDs and SSDs in the system.

Click the relevant menu option where the front panel of the head shelf can be visualized.

23. A customer successfully implemented an HPE Primera solution.

Which tool can be used to verify performance counters, such as IOPS, match customer requirements?

24. A customer successfully implemented an HPE Primera solution.

Which tool can be used to verify achieved savings from deduplication and compression in the customer solution?

25. A customer has the following requirements for a storage solution:

VMware environment

20 ТВ of standard business data

400 TB of video archive files

10 GB iSCSI connectivity

They are most concerned with the cost of the solution.

Which HPE storage solution offers the lowest cost while meeting the customer requirements?

26. You are proposing a StoreOnce solution to a customer that has always used tape for a backup target.

What should you suggest to ensure that the StoreOnce deduplication is correctly sized?

27. A customer is purchasing an HPE MSA 2050 for a branch office. They will use it for critical data services. The customer is concerned that 64 snapshots will not be adequate as they grow.

What can be added to the array to address the customer’s concerns?

28. You have proposed a Primera array to a customer for new primary storage. The customer currently has an older 3PAR array that they will continue to use moving forward. The customer would like high availability configured.

Which RMC Peer Copy pre-requisites do you need to point out to the customer? (Choose two.)

29. Which protocol can be used for accessing StoreOnce VTL target from Veeam?

30. Which StoreOnce Gen4 features are included with the system software without additional licenses? (Choose two.)

31. You are proposing a new Nimble solution to a customer that recently experienced data loss in their existing storage array.

Which features of the Nimble array should you emphasize to your customer to address their concerns? (Choose two.)

32. Which tool is used to configure an HPE MSA 2052?

33. DRAG DROP

Match the feature to the appropriate C-Series DCNM license type.

34. A customer has a VMware environment running vSphere 6.5. They are running DL380 Gen10 servers with HPE 82Q adapters connected through a HPE SN3000B switch to a Nimble HF40. They plan to upgrade the hypervisor.

What should they use to identify the latest firmware and compatibility information?

35. DRAG DROP

Match the MSA architecture components with their descriptions.

36. A customer needs a centralized solution for storing departmental data to be accessed by Windows-

based laptops and other personal devices.

Which solution should you recommend?

37. You deployed and configured an all-flash Nimble array. The customer wants to attach their Windows-based server to the array.

Which HPE tool can you use on the host server to make the integration easier?

38. A small company has recently purchased an MSA and two B-series SN3000B switches. In an effort save money, they installed the solution themselves. They call you complaining they can now see the multiple volumes on the MSA after creating just a single volume.

What should you advise them to do?

39. A customer is deploying a new StoreOnce VSA solution.

How can the necessary storage capacity be added to the VSA? (Choose two.)

40. DRAG DROP

A customer wants to implement a new storage network, but wants to retain the ability to connect with legacy fiber channel-based components.

Drag the appropriate component to each box on the diagram to design a new storage network.

41. A customer currently runs MSA 2040 SAS storage system with SFF drives. They are planning a hardware refresh. The customer is using virtual pools only, and is concerned about problematic data Migration to the new platform.

How can the update to MSA2050 be performed?

42. You are installing an HPE 3PAR StoreServ solution and need to integrate the array with the 3rd party monitoring application customer is using.

Which technology can be configured at 3PAR to support forwarding events from the array to the customer’s monitoring application?

43. Which actions can be done within InfoSight Cross-Stack Analytics for VMware and Hyper-V? (Choose two.)

44. DRAG DROP

Match each address with the associated address type.

45. A customer purchased a StoreOnce 3620 earlier in the year and has decided to add a 10GBase-Т adapter to it, which the customer sourced elsewhere and installed themselves. They complain that the new adapter is not configurable.

What is the most likely reason for this issue?

46. You are designing a new storage environment for a customer. They need good performance, but need to keep costs to a minimum.

They have a very limited staff, and staff is concerned about learning new technologies. You plan to recommend a Nimble HF20 solution.

Which storage connectivity components should you recommend?

47. A customer runs their core application on an aging HPE 3PAR StoreServ 20000 Storage array. The application requires 100% availability.

Which HPE storage solution should you recommend?

48. You are asked to review an installation plan for a new Primera storage array. The array will go into an existing environment that has been in production for over 4 years.

It includes:

C7000s with Gen8 blades

8Gb Brocade switches

a 3PAR 7400

an MSA that is used as a backup target

What should you use to find appropriate installation and planning guides?

49. You are designing a new HPE 3PAR StoreServ solution.

Which HPE tool allows editing the Customer Intent Document and adding specific instructions for packing?

50. Refer to the exhibit.

A customer purchased a Primera C6S0 array to replace several older 3PAR arrays. They plan to upgrade the system as each 3PAP reaches the end of its lease. The initial sizing included 100TB effective capacity for an Oracle database environment.

The first 3PAR to come off lease has 100TB of VDI boot images that support thousands of users.

Which addition to the Primera should you recommend?

A)

B)

C)

D)

51. HOTSPOT

You are configuring a new HPE 3PAR solution and need to create a new disk group with a defined RAID level.

Click the appropriate option where the RAID can be selected.

52. Which feature allows HPE Primera, HPE Nimble, and HPE XP arrays to work with third-party management tools?

53. DRAG DROP

Select the correct initiation option for each HPE Primera function.

54. What is the purpose of WWN in FC SAN? (Choose two.)

55. You have proposed a Primera array to a customer for primary storage. The customer currently has an older HPE 3PAR array and will continue to use it moving forward. The customer would like high availability configured.

Which RMC Peer Copy pre-requisites do you need to point out to the customer? (Choose two.)

56. Which tool is used to provide centralized management of 3PAR and Primera arrays?

57. You need to deploy a Recovery Manager Central appliance and integrate it with a customer’s 3PAR system.

Which information must be collected from the customer in order to proceed with the installer? (Choose two.)

58. DRAG DROP

Match each HPE storage solution to its use case.

59. What is the typical protocol used to access data from object storage?

60. Which functionality available in an HPE 3 Par StoreServ 8400 system that is not available in an HPE 3par Storesrve 7200

61. Which storage principle would benefits of customer who has several departments in their organization with different storage needs?

62. A customer with restricted budget has an existing HPE 3PAR storeserver 8200 using 10kfast class and near line drives because of the implementation of new application .the workload has shifted to be read intensive therefore, they want to increase the read I/O performance What should they add to their environment?

63. Which management interface uses four basic commands (Create, read, update ad delete )to enable administrators to define ad radically simply management processes?

64. What can move data directly from a snapshot to backup storage independent of backup server software?

65. What is the benefits of HPE synergy (Select 2)

66. A large organization is experiencing exponential data growth of object storage due to recent mergers and acquisition. They need an on-premise solution to optimize cost at petabyte scale.

Which components should you recommend for a software-defined solution? (select two)

67. A customer migrate their infrastructure from a 3rd party storage to a Nimble

environment. During an architecture workshop, you discuss VMvision with the customer and the system engineer.

Which statement is correct when implementing performance monitoring using VMVision?

68. Which SAN topology offers the highest centralized data access performance?

69. A customer need to implement a new SAN fabric for their growing environment. The new SAN should provide a high performance and portCefficient network with many-to-many connectivity. Because of changing requirement and the possible acquisition of another company in the near future. The customer cannot predit the I/O traffic pattern within the SAN. The customer also concerned about availability.

Which type of SAN topology should you recommend?

70. Which storage tool in the storage assessment foundry provide data protection analysis?

71. A customer is a cloud service provider with infrastructure powered by HPE 3PAR Storeserv 9000.The customer is concern about their ability to ensure the quality of service and protect their tenants from unpredictable bursts of I/O from other tenants.

What should you recommended to your customer?

72. A customer has an existing configuration consisting of first class and nearline SAS drive in an 8000 SFF enclosure. They add two SFF 8000enclosure that are fully populated with nearline drives to an existing HPE 3Par storeserv 8400 array.

What should the customer do to optimize their storage configuration?

73. Which storage protocol is supported by virtual connect Flex-10?

74. A customer need a new storage system for visual desktop infrastructure environment to reduce the time required to provision new desktop.

Which HPE solution should you recommended to fulfill this customers requirements?

75. A customer needs to be manually map out preferred paths within a multi-switch fabric, based on application, priority, and topology, while allowing failover to a non-preferred path if the preferred path fails.

Which B-series FC switch functionality should be used to provide this?

76. What allows volume level data to be copied between an HPE 3PAR and an HPE store Virtual VSA?

77. A customer has an excisting environment with 3PAR,Nimble and MSA. They are providing file servicing from all arrays with multiple virtual machine but preference is not adequate.

What should you add to the environment to increase performance, increase availability, and reduce management overhead?

78. Which statement describes HPE StoreVirtual Network RAID functionality?

79. During a proof-of-concept you need to implement an inter-switch-link (ISL)between two HPE SN6000B switches.

Which port mode must be set enable communication between the switches?

80. In an ISCSI based storage system Proof-Of-Concept project, the customer is not satisfied with the performance of their video streaming application.

What would you recommended to the customer to optimize the excisting environment?

81. You are designing a new HPE 3PAR StoreServ all-flash array for the customer.

Which ratio should you expect to have the highest efficiency?

82. A customer need to update the local sever at each of their branches keep up with the increasing demand for High-performance storage. The customer cannot afford to move to SAN at each state.

Which HPE storage technology can increase performance for this customer?

83. Refer to the exhibit:

Which type of data format do you expect in the red rectangle?

84. Which 3PAR storeServ feature allow to host to continue I/O uninterrupted during a firmware update?

85. A customer has deployed an HPE 3PAR StoreServ 8400 with two nodes and three additional disk enclosure. They want to expand the solution with two additional nodes and three additional disk enclosure ..

What must you do to expand the customers solution?

86. During which event will HPE 3par Storeserv persistent port feature provide transparent and uninterrupted failover (Select two)

87. Exhibit:

The customer has upgraded the first of their two HPE StoreServ 8200to the latest inform OS version to take the advantage of the compression feature. You have been asked to design the storage configuration to support oracle database volume to utilize HPE 3PAR compression .

Based on the analysis of the array. what would be your suggestion to implement the requested change?

88. Due to industry regulation a customer is required to store backup at a separate data center from the company’s main data center. The customer application require fast backup and quick restore increase of data lose.

Which solution allow the customer to meet both industry and application requirement?

89. Which type of networking switch handles both Ethernet and fibre channel traffic?

90. What has to taken into account when performing capacity planning for HPE Nimble storage using deduplication?

91. Which statement is true when defining object storage?

92. A customer uses Recovery manager central for Vmware (RMC-V). They need to ability to perform granular recovery of application item directly from backups...

Which solution integrates with RMC-V to provide the desired requirements?

93. What performance benefit is provided by using the HPE StoreVirtual DSM for Microsoft MPIO instead of the standard MPIO?

94. After a performance analysis, a customer plan to reorganize his adaptive Flash cache (AFC) configuration and want to raise it from 256 to 768GB.

Which action is needed to take advantage of the new AFC configuration?

95. How does HPE StoreVirtual DSM for windows enhanced Microsoft windows native MPIO?

96. A customer run several HPE 3PAR storeserv system in their environment using data rest encryption. The customer needs to add an HPE 3PAR Storeserv 8000system to the storage pool and an external key manager for all systems.

What is the requirement for this solution?

97. A customer has a SAN based on HPE B-series switches with Gen6 fibre channel technology. Their workload is continually growing and they are experiencing performance issues. They need a solution to enable real-time monitoring and to speed up troubleshooting in his SAN backend.

Which unique feature of the HPE B-series Gen6 switches should you recommend? (Choose two.)

98. A customer need to server 40TB via file protocols including SMB and FTP to a board range of client operating system in one location .security protocol dictate that data must be encrypted with FIPS 140-2 compliance.

Which HPE storage solution you recommend?

99. A Company using an existing 1GB ISCSI storage array is experiencing storage access performance issue. They are interested in deploying HPE 3PAR Storeserv with 16GB /S FC end to-end to improve the performance to the minimal changes to the environment.

The existing environment consists of these HPE products

* HPE C7000 Blade system platinum blade enclosure with HP virtual connect Flex 10 interconnect modules.

* Configuration of HPE Proliant Gen8 and Gen9 blade servers

* HPE 2920 Switches

Which HPE products must be included to support new HPE 3PAR Storeserv? (Select two)

100. A customer has a new Nimble CS3000 21T storage systems and is facing latency issues for his 2TB

ERP database.

What would be a design approach to solve this issue?