FREE 1Y0-402 Citrix XenApp and XenDesktop 7.15 Exam Questions Online Test

1. Scenario: A Citrix Architect must complete a XenApp and XenDesktop security assessment. After examining the network topology for the hypervisor hosts supporting the Virtual Delivery Agent (VDA) machines, the architect finds that some of the network connections are NOT following leading security practices.

Click the Exhibit button to view a high-level diagram which shows the connectivity between various components.

Which three of the labeled areas of the diagram represent connections which are NOT following Citrix leading security practices? (Choose three.)

2. Scenario: A Citrix Architect needs to redesign an existing XenApp and XenDesktop environment to use Machine Creation Services (MCS). During the design discussions, the locations for the MCS-provisioned thin clone machine disks are proposed as shown in the Exhibit.

Click the Exhibit button to view the details.

Which two potential drawbacks should the architect address with the customer before proceeding with this configuration? (Choose two.)

3. Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.

The architect has identified the User Layer requirements, as shown in the Exhibit.

Click the Exhibit button to view the requirements.

Additionally, management at the organization has identified the following general Access Layer requirements:

A multi-factor authentication method is required for any connections to the XenApp and XenDesktop environment originating from outside the corporate network. External connections must be authenticated by a NetScaler Gateway virtual server located in a DMZ network. Internal connection traffic should NOT leave the internal corporate network.

Which two authentication methods should the architect use for the Contractors group? (Choose two.)

4. Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. While deploying Optimal HDX Routing for the customer, the architect makes the following configurations:

Authentication Gateway - AuthGW C Logon.workspace.com - Authentication only New York Gateway - NYCGW C Nycgw.workspace.com - HDX Routing only San Francisco Gateway - SFOGW C Sfogw.workspace.com - HDX Routing only

Click the Exhibit button to view further details about the configuration.

Upon investigation of the load on the NetScalers, the architect determines that both internal and external HDX traffic flow through the NetScaler Gateways and the NetScalers are running at capacity.

Which PowerShell commandlet and parameter can help the architect address this issue until more NetScaler resources are procured?

5. Scenario: A Citrix Architect needs to design a multi-datacenter XenApp and XenDesktop environment that will use Provisioning Services (PVS) to manage Virtual Delivery Agent (VDA) machine images. Each datacenter will have a separate Provisioning Services farm. During the design discussions, the architect creates a diagram to depict the way vDisk files will be replicated between PVS farms, based on the available storage for the vDisk Stores.

Click the Exhibit button to view the diagram.

Overall, the customer has identified the following objectives for the image replication process:

Minimize the administrative time required to replicate images between farms Must be usable by PVS farm administrators based on native tools Minimize network traffic between datacenters

Which method should the architect use to replicate the vDisk files between datacenters?

6. Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment for a financial services company. During the project kickoff meeting, the organization states the following business priorities:

"Overall, we want a robust solution which ensures that users can access their resources at any time, even if our primary datacenter experiences an outage. Our employees will need to access their resources from both inside and outside our corporate network, but we need to ensure that we enable this in a secure manner and protect our sensitive data."

Which four design decisions align with the organization's stated business drivers? (Choose four.)

7. Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.

The table in the Exhibit lists details about the requirements of the current user groups and their Virtual Delivery Agent (VDA) machine workloads.

Click the Exhibit button to view the table.

The architect should scale the hardware used to host the VMs for User Group 1 to ______ cores. (Choose the correct option to complete the sentence.)

8. Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.

The architect has identified the Resource Layer requirements shown in the Exhibit.

Click the Exhibit button to view the requirements.

Additionally, management at the organization has identified the following general Resource Layer requirements:

The profile solution should be centrally managed. The profile solution should minimize logon and logoff times as much as possible. User groups do NOT need to use the same profile type. Citrix Director should be used for monitoring profiles.

Which profile type should the architect use for the Executives group?

9. Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.

The architect has identified the Resource Layer requirements shown in the Exhibit.

Click the Exhibit button to view the requirements.

Which feature of Citrix Profile Management could help the architect address the Graphic Designers group requirements?

10. Scenario: While assessing the User Layer, a Citrix Architect finds that most of the internal users connect using corporate-owned laptops, desktop devices, and thin clients. Many of these laptops and desktop devices are running Windows 10, while the remainder of the machines are running Windows 7 and are in the process of being migrated to Windows 10. Some users also connect using personal devices which have Receiver Desktop Lock installed.

Currently, Citrix Receiver is manually installed on any endpoint device added to the company. All these devices use Citrix Receiver version 4.8 and above. The IT team is planning to automate a process to update all the devices with the latest version of Citrix Receiver and to automate another process for automatic installation of Citrix Receiver without incurring extra costs and maintenance.

During the initial testing of the Citrix Receiver Auto-Update feature, the architect observed that the Citrix Receiver Auto-Update feature does NOT work on some of the machines.

Which two reasons could be causing this issue? (Choose two.)

11. Scenario: A Citrix Architect needs to design a multi-datacenter XenApp and XenDesktop environment that will use Provisioning Services (PVS) to manage Virtual Delivery Agent (VDA) machine images. Each datacenter will have a separate Provisioning Services farm. During the design discussions, the architect creates a diagram to depict the way vDisk files will be replicated between PVS farms, based on the available storage for the vDisk Stores.

Click the Exhibit button to view the diagram.

Overall, the customer has identified the following objectives for the image replication process:

Minimize the administrative time required to replicate images between farms Must be usable by storage administrators without PVS farm administrative permissions Utilize pre-existing infrastructure and processes where possible

Which method should the architect use to replicate the vDisk files between datacenters?

12. Scenario: A Citrix Architect is designing a XenApp and XenDesktop environment and needs to design machine catalogs and Delivery Groups. Users should only be able to access their assigned resources.

Click on the Exhibit button to view the design requirements.

What is the appropriate design using the minimum number of machine catalogs and Delivery Groups, based on the requirements in the Exhibit?

13. Scenario: After a recent security assessment, a Citrix Architect recommends blocking unnecessary peripheral types by disabling the associated HDX channels. Currently, the environment is intended to support the peripheral types listed in the Exhibit.

Click the Exhibit button to view the supported peripheral types.

Which four HDX virtual channels should the architect disable, based on the peripherals required in the environment? (Choose four.)

14. Scenario: A Citrix Architect is designing an environment for a large company. The company has identified the following user groups and requirements.

Product Managers - Typically, they work from inside the company network but are able to work from home. They need to use a variety of standard productivity and web-based SaaS applications. Field Sales Engineers - They frequently work with mobile devices and tend to access the environment externally. They need access to sales tools and the front-end of the customer database. Web Developers - Internal and remote workers who use specialized hardware with a graphics card to handle resource-intensive applications.

Which FlexCast model should the architect assign to Product Managers?

15. Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.

The architect has identified the Resource Layer requirements shown in the Exhibit.

Click the Exhibit button to view the requirements.

Additionally, management at the organization has identified the following general Resource Layer requirements:

The profile solution should minimize logon and logoff times as much as possible. The time required to configure and maintain the solution should be minimized. User groups do NOT need to use the same profile type.

Which profile type should the architect use for the Customer Service group?

16. Scenario: A Citrix Architect needs to manage the disaster recovery process for a XenApp and XenDesktop environment. The environment currently consists of an active datacenter which is typically accessed by users and a disaster recovery (DR) datacenter which would be used in the event that a disaster impacts the primary datacenter. The organization has made it a priority to minimize the loss of data when failing over between datacenters and has begun planning for an event in which the environment must fail over from the primary datacenter to the DR datacenter.

What is the appropriate sequence of steps that the architect should follow after getting management approval to complete the process in case of such an event?

17. Scenario: A Citrix Architect is designing a new XenApp and XenDesktop environment and needs to determine which endpoints to include. Based on discussions with various departments, the user requirements listed in the Exhibit were collected.

Click the Exhibit button to view the requirements.

In addition to the user requirements, the architect has identified the following organizational requirements:

Minimize total cost of ownership (TCO) Minimize maintenance costs

Which endpoint type should the architect use for the Product Development group, based on the requirements?

18. Scenario: A Citrix Architect needs to design a new XenDesktop environment for a client who does NOT currently have a Citrix environment. The project scope has NOT yet been determined, and the architect is about to start the Assess phase of the project.

In which order should the architect complete the four tasks of a typical assessment when following the Citrix methodology?

19. Scenario: A Citrix Architect needs to implement XenApp and XenDesktop. Based on the assessment and early stages of the design, the architect has identified the requirements as shown in the Exhibit.

Click the Exhibit button to view the requirements.

Which tier of storage should the architect consider implementing, based on the requirements in the Exhibit?

20. Scenario: A Citrix Architect is reviewing a XenApp and XenDesktop design for an environment with multiple Active Directory forests.

Click the Exhibit button to view the design details.

Which risk should the architect highlight to the customer, based on the details listed in the Exhibit?