Focus On The Updated NS0-527 Dumps OF DumpsBase To Prepare For NetApp NCIE-DP Certification Exam Well

1. You are using Veeam Backup & Replication to create Snapshot-based backups of your VMware environment running ONTAP. You added your primary and secondary ONTAP cluster to the Veeam Storage inventory.

However, you are unable to select your secondary ONTAP cluster as a secondary target for your Veeam backup job.

In ONTAP System Manager, which action solves this problem?

2. A customer is running ONTAP 9.7 on a FAS2720 cluster that has 12 x 4 TB NL-SAS drives in the chassis with capacity running low. You decide to use Fabric Pool technology to solve this problem.

What does the customer need to do to accomplish this task?

3. Which two configurations would be used to protect volumes in a production ONTAP system at twodifferent disaster recovery (DR) locations? (Choose two.)

4. Exhibit:

You are configuring a SnapMirror relationship to capture all daily activities and archive them. Information about the environment is shown in the exhibit.

In this scenario, how much data must be transferred during the scheduled SnapMirror update?

5. What are three methods of configuring SnapMirror replication relationships? (Choose three.)

6. During NDMP incremental backups, you want to reduce the time spent finding the changed data between two Snapshot copies.

In this scenario, which ONTAP feature will accomplish this task?

7. Your DevOps team reported that one virtual machine on a VMware datastore has been corrupted due to a ransomware attack.

In this scenario, which two methods would solvethe issue? (Choose two.)

8. Click the Exhibit button.

You are configuring cluster peering from cluster2 to cluster1 on your ONTAP 9.7 clusters using ONTAP System Manager. You are given the details shown below to set up the cluster peer relationship. You want to determine why the peering has failed.

Cluster2 intercluster LIFIP: 192.168.0.143 Subnet: 255.255.255.0 Port: e0e passphrase:

netapp1234

Cluster1 intercluster LIF IP: 192.168.0.153 Subnet: 255.255.255.0 Port: e0e passphrase:

netapp1234

Referring to the exhibit, which statement is correct?

9. You decide to enable SnapMirror network compression on your NetApp clustered Data ONTAP environment.

Which two statements are correct about enabling this feature? (Choose two.)

10. Data on an AFF system is replicated using SnapMirror to aFAS system that is configured with NL-SAS-based storage.

In this scenario, which storage efficiency is lost on the SnapMirror destination?

11. You must determine if there have been any backup problems overnight.

Which two reports in OnCommand Unified Manager 6.2 would provide you with the required information?

(Choose two.)

12. Which two NetApp features would help you to recover from a file share that was encrypted by a ransomware event? (Choose two.)

13. You are asked to implement a NetApp solution that has high availability with transparent failover between two data centers.

Which two solutions satisfy this requirement? (Choose two.)

14. To ensure enough bandwidth for other applications, you want to restrict all replication bandwidth on your destination cluster.

How would you accomplish this task?

15. You want to conserve disk space in your SnapVault destinations. You enable storage efficiency on each of the secondary volumes.

Which two statements are true in this scenario? (Choose two.)

16. You need to backup Exchange, MS SQL, and VMware virtual machines with application consistency.

Which tool accomplishes this task?

17. You want to determine the amount of cold data that can be tiered from a FabricPool-enabled aggregate.

In thisscenario, which feature satisfies this requirement?

18. Click the Exhibit button.

A customer needs to add an additional X91143A card into a FAS9000 to allow mirroring between the production system and the disaster recovery FAS9000 platform. Slots 1, 4, 6, 8, and 9 have cards in them.

Referring to the exhibit, in which slot should you install the card?

19. You are planning to deploy MetroCluster IP. As part of the implementation strategy, you are asked to verify that youhave the relevant hardware for the deployment.

Which two elements are required to deploy your solution? (Choose two.)

20. Click the Exhibit button.

Referring to the exhibit, which three would be used to configure the three-way Data Center Disaster Recovery topology replication schedules? (Choose three.)

21. You want to configure peering between two existing ONTAP HA clusters.

In this scenario, which three steps would you perform to accomplish this task? (Choose three.)

22. You are upgrading your Data ONTAP cluster from clustered Data ONTAP 8.3 to clustered Data ONTAP 9.1.

Which two actions must be performed for the SnapMirror relationships? (Choose two.)

23. You are copying your data and replicating it off site.

What is the called?

24. Click the Exhibit button.

Referring to the exhibit, what two Search Criteria check boxes need to be used to provide a supported solution for protecting Windows Server 2019 DCE 64-bit, x64 host using local NetApp LUNs with SnapCenter Server 4.1.1? (Choose two.)

25. A volume has been filled completely by active data and Snapshot copies.

What must you do to make the volume writable again?

26. You are monitoring data protection relationships of type XDR using OnCommand System Manager running ONTAP 9.5. In the GUI, you click Protection -> Volume Relationships.

In this scenario, which status in the Relationship State field must be displayed to ensure that the relationships are working as expected?

27. A customer wants to set up SNMP to monitor their ONTAP platforms. Because of securityreasons, they need strong authentication and data encryption?

In this scenario, which SNMP version satisfies these requirements?

28. A customer’s infrastructure consists of multiple ONTAP clusters, both physical and virtual. The clusters replicate some data with each other. You want to generate a comprehensive report of all the replication that is present on the infrastructure.

In this scenario, which tool accomplishes this task?

29. A client has a primary data center that is located in a coastal area where the forecast is calling for a Category 5 hurricane to make landfall in three days. The client’s data is protected using NetApp SVM SnapMirror replication technology with identity-preserve that is enabled. The data is mirrored to a destination cluster outside of the affected area. The client has scheduled a controlled maintenance window for tomorrow to ensure that dependable operations are maintained.

Which three steps must be taken to accomplish this task? (Choose three.)

30. Your customer wants to ensure that the SnapMirror relationships are easily managed in a bidirectional, multi-cluster environment.

Which version of clustered Data ONTAP would you recommend?

31. Click the Exhibit button.

You need to verify that you have a 10 Gb path between two clusters for SnapMirror traffic. Referring to the exhibit, how fast is the network path between the clusters?

32. Which two NetApp products reduce the backup time and create a consistent backup for a primary Oracle target? (Choose two.)

33. Which two NetApp technologies allow for synchronous replication of data between two remote sites? (Choose two.)

34. A customer has ONTAP 9.5 clusters running at two nearby locations. The customer wants a zero RPO for one mission-critical volume.

In thisscenario, which two NetApp solutions satisfy this requirement while using the existing ONTAP clusters? (Choose two.)

35. An ONTAP administrator is trying to configure a three-way-disaster recovery solution. Cluster 2 is within 50 km of Cluster 1, the primarycluster, with an RTT of 7 ms. Cluster 3 is over 300 km from Cluster 1 with an RTT of 29 ms.

In this scenario, what are two topologies that would accomplish this task? (Choose two.)

36. Click the Exhibit button.

In an ONTAP environment, an SVM-DR relationship exists between your AFF A220 cluster and your FAS2720 cluster, with identity preserve enabled. You are asked to test thedisaster recovery workflow in an upcoming maintenance window.

Referring to the exhibit, which step should be performed next to test the recovery workflow?

37. Which two statements are correct about configuring a peering connection between clusters? (Choose two.)

38. You noticed that your SnapVault relationship is healthy but that the destination volume does not have any Snapshot copies.

In this scenario, what should be performed to solve the problem?

39. A customer wants a new solution that reaches a near-zero recovery time objective (RTO) and a zero recovery point objective (RPO).

In thisscenario, which NetApp solution satisfies the requirements?

40. Click the Exhibit button.

An employee’s computer and mapped home folder has been encrypted with ransomware.

You are asked to restore the data from a SnapVault repository.

Referring to the exhibit, what happens when the volume is restored?

41. A storage administrator is reviewing NAS volume spaceallocation and is concerned that the Snapshot copies that are recently created to protect the volumes are not storing the data from the volumes. One volume contains over 20 GB of data, although the latest SnapShot copy contains only 198 KB of data.

In this scenario, which statement is true?

42. After deploying an ONTAP Select 2 node HA cluster at a remote site, you successfully perform manual takeover and giveback before placing the cluster into production. After the cluster runs in production for a week, you notice that you can no longer perform a manual takeover.

In this scenario, what are two causes of this problem? (Choose two.)

43. Which two tools would you use toverify that an Oracle database has an application-consistent snapshot taken? (Choose two.)

44. A customer has just purchased a new 2-node AFF A220 cluster running ONTAP 9.7 and moved the older 4- node FAS2650 cluster running ONTAP 9.5 to an off-site location. They want to configure replication to the FAS2650 cluster for both disaster recovery and long-term archiving.

In thisscenario, how would the customer accomplish this task?

45. A previous administrator had configured an external backup system to use node-scoped NDMP for backups, but you want to change this system to use SVM-scoped NDMP.

How do you make this change in ONTAP?

46. You want to ensure that you are using compatible hardware and software versions with your MetroCluster installation.

Which tool would accomplish this task?

47. You have a network outage that affects client access to site A. You need to temporarily reverse the SnapMirror relationship of a volume to serve data from site B.

Which two steps must you perform first? (Choose two.)

B. Take the source volume offline.

C. Break the SnapMirror relationship.

D. Delete the SnapMirror relationship.

E. Abort the SnapMirror relationship.

48. A volume on a FabricPool-enabled aggregate is consuming 10 TB of the performance tier and 90 TB of the cloud tier. A SnapMirror copy needs to be created on a FabricPool-enabled peer cluster at a disaster recovery location.

In this scenario, how much data is transferred when the SnapMirror relationship is initialized?

49. A customer has deployed OnCommand Unified Manager and wants to use it to manage their data protection relationships within their NetApp storage infrastructure.

In this scenario, which additional component must be deployed to satisfy this requirement?

50. You received an alert from OnCommand Unified Manager (OCUM) that a NetApp FlexVol is almost out of space.

Which three actions are available to perform from the OCUM events detail Web page? (Choose three.)