Effective HPE7-A07 Dumps (V9.02) – Latest Study Materials to Prepare for the Aruba Certified Campus Access Mobility Expert Written Exam

1. Exhibit.

Which would explain this issue?

2. A customer is evaluating device profiles on a CX 6300 switch.

The test device has the following attributes:

• MAC address = 81:cd:93:13:ab:31

• LLDP sys-desc = iotcontroller

The test device is being assigned to the ‘’lot-dev’' role However, the customer requires the "lot-prod’’ role be applied.

Given the configuration, what is causing the "iot-dev" role to be applied to the device'?

3. You configured" a bridgedmode SSID with WPA3-Enterprise and EAP-TLS security. When you connect an Active Directory joined client that has valid client certificates.

ClearPass shows the following error.

What is needed to resolve this issue?

4. Exhibit.

An engineer has applied the above configuration to R1 and R2 However the routers OSPF adjacency never progresses past the "EXSTART-DR" slate as shown below.

Which configuration action on either router will allow R1 and R2 to progress past the "EXSTART/DR" state?

5. Exhibit.

Which statement is true?

6. You are deploying a new AOS 10 mobility gateway cluster. Due to customer requirements, the gateways must be configured with static IP addresses and are restricted from communicating using port 443 to any URLs except tor "central arubanetworks.com

How would you onboard these gateways successfully into HPE Aruba Networking Central?

A)

B)

C)

D)

7. You configured a tunneled SSID with captive portal and a ClearPass Guest Self Registration workflow when testing and launching the self-registration workflow, after successful registration, the login action shows the following error:

What is the best solution to resolve this error?

8. What directly affects the MCS used by wireless stations? (Select two.)

9. Which command would allow you to verity receipt of a CoA message on an AOS 10 GW?

10. You created a new SSID with the security settings shown in the exhibit.

Some, but not all users complain that client devices are unable to connect to this SS1D.

What is the reason for this?

11. Exhibit.

Which statement is true given the following CLI output from a CX 6300?

12. Your customer asked for help to apply an ACL for wireless guest users with the following criteria:

• Wi-Fi guests are on VLAN 555

• allow internet access

• only allow access to public DNS servers

• deny access to all internal networks except for any DHCP server

These session ACLs are already present in the CLI of the mobility gateway group:

You have access to the CLl.

Which user role meets all the criteria?

A)

B)

C)

D)

13. Refer to the CLI output below:

What statement about the output above is correct?

14. A Windows device attempts to connect to an 802.1X network but it is not receiving the correct role. TEAP has been configured asthe only authentication method in ClearPass.

The wireless configuration is correct.

Exhibit.

What is me mostlikelycause?

15. Exhibit.

Which user role will be assigned when a voice client tries to connect for the first time, but the RADIUS server is unavailable?

16. A customer is evaluating device profiles on a CX 6300 switch.

The test device has the following attribute:

• MAC address=81:cd:93:13:ab:31

The test device needs to be assigned the "lot-prod'' role, in addition the "lot-default" role must be applied for any other device connected lo interface 1/1/1. This is a lab environment with no configuration of any external authentication server for the test.

Given the configuration example, what is required to meet this testing requirement?

17. What is me recommended configuration to ensure link aggregation is consistent in a campus topology using VSX with two aggregation switches and downlinks to access switches?

18. A customer has interfering devices that are seen over the air. They contact you and ask you to configure RAPIDS to help identify interfering and rogue APs. HPE Aruba Networking Central identifies a rogue AP and displays the connected switch port.

How can HPE Aruba Networking Central identify which switch port the AP is connected to?

19. A deployment using AP-635S is connected to a stack of CX 6300s as shown.

The output of the snow LACPinterfaces shews the following:

What is causing this issue?

20. Exhibit.

A network administrator attempts to improve multicast traffic flow and performs some packet captures for validation.

What can the network administrator conclude from the results?

21. You configured a WPA3-SAE with the following MAC Authentication Role Mapping inCloud Authentication and Policy:

With further default settings assume a new Android phone is connected to the network.

Which role will the client be assigned after connecting forthe first time?

22. Exhibit.

You updated your gateway to me most recent firmware However after the firmware was updated, the gateway could no longer connect to HPE Aruba Networking Central. Your corporate ITIL procedures require you to implement your backout plan. You connected a console cable to your gateway and saw the following prompt.

Cpxload#

in what order, do you need to execute the following commands to return to the previous firmware version?

23. Your customer is requesting a4-ciass LAN queuing model tor QoS. Following best practices, match the PHB/DSCP values to the application types.

24. After onboarding three new AOS 10 gateways using the full-setup methodinto the same Central group, a customer cannot log in to one of the gateways using the HPE Aruba Networking Central remote console due to an incorrect password.

25. A customer is deploying a new warehouse with AP-634 APs inthe unitedStates with mobile devices that can operate in the 6GHz spectrum All testing and RF analyses were performed during the POC using AP-635 APs In a different location During the deployment, they noticed fewer 6GHz channels were broadcasting in the air.

Why would the AP-634 deployment have a lesser amount of broadcasting channels?