DELL EMC D-VXR-OE-01 Dumps (V8.02) – Choose DumpsBase for Dell VxRail Operate v2 D-VXR-OE-01 Exam Preparation

1. What is the maximum number of racks supported when expanding a VxRail cluster beyond a single physical rack?

2. What is the correct order of steps to create a VM for a new project using vSAN and VxRail?

3. How many Failures to Tolerate can be configured with vSAN RAID-1?

4. A VxRail administrator wants to rename the VxRail cluster and the VxRail vSAN datastore.

What is the recommended method to make these changes?

5. A VxRail administrator observes alarms that start with VXR in the vSphere client.

How can they obtain information about the alarms and the related knowledge base articles?

6. VxRail Manager provides a software stack for a software-defined data center.

Which layers are part of the stack?

7. Create a VDS with the required number of uplinks.

8. A VxRail administrator wants to determine how long the rebuild will take after experiencing a disk failure in the vSAN Cluster.

Where is this information located in the vSphere Client?

9. What is the correct path for editing the Object Repair Time from the vCenter client?

10. Where in the VxRail Plugin can log bundles be generated?

11. A customer has a large storage capacity and low I/O performance requirements.

Which VxRail solution is the best fit?

12. What is true about Multitrack VxRail cluster expansion?

13. An administrator wants to perform maintenance on a VxRail system.

Which configuration should be used for the VxRail Cluster Health Monitoring before starting the maintenance activity?

14. Using VxRail Manager, what information can you find under the physical health view?

15. When configuring Data at Rest Encryption (DARE) on a vSAN cluster, what is required?

16. What VxRail Manager activities can be performed by a user with the VMware Administrator role?

17. The vSphere Client is showing several failures on node 3. Support recommends opening an SSH session to troubleshoot. The connection fails to establish.

Which path should be used to enable SSH on the host from vSphere Client?

18. In a VxRail appliance, what does vSAN use in the form of flexible data containers to store and manage data?

19. What is used in the VxRail infrastructure to manage multiple clusters of ESXi servers?

20. As a VxRail administrator you have been asked to configure vSAN fault domains After selecting the VxRail cluster, where would you navigate to in vCenter to accomplish this task?

21. What is the VxRail API path for downloading the log bundle?

22. What enables an administrator to download qualified software products for the VxRail System?

23. VxRail Stretched cluster deployment with eight nodes at each data site is being proposed.

What is the latency requirement between each data site and the Witness site?

24. A VxRail deployment has eight nodes. The VxRail administrator does not find any compatible datastores when trying to create a storage policy with FTT=2 and FTM=Erasure Coding.

What is the likely reason?

25. What is the maximum number of nodes supported in a VxRail cluster with 1 GbE networking?

26. Which system components are managed through a vCenter plug-in?

27. An administrator is tasked with remediating the identified security vulnerabilities in the VxRail cluster. The administrator needs more information to resolve the security issues.

What should be used to gather the required information?

28. A failure occurs while upgrading a VxRail cluster.

Which log file should be analyzed?

29. A VxRail administrator wants to monitor vSAN Backend IOPS, Throughput, and Latency in the vSphere Web Client.

What must be turned on to monitor these metrics?

30. Which VxRail cluster can tolerate a host failure?

31. What is the minimum number of nodes needed for self-healing after a failure with a vSAN storage policy of FTT = 1 and FTM = Mirroring?

32. Which user interface provides remote power control (power on and power off) for VxRail E Series nodes?

33. A VxRail administrator is concerned that the NDC is a single point of failure on your VxRail nodes.

What can be done to increase redundancy in this scenario?

34. A company intends to deploy VxRail for their heavy database workloads on Oracle 11G.

Which type of VxRail nodes should be recommended?

35. A systems administrator is tasked with upgrading the VxRail software.

Which resource should the administrator use to plan the upgrade?

36. When vSAN deduplication and compression are enabled on an existing VxRail cluster, when does the disk reformatting operation occur?

37. In the vSphere Client, where is VxRail Health Monitoring enabled?

38. A VxRail cluster needs to be moved to a new rack in the datacenter. During this process, the entire cluster will be temporarily shut down.

Which Maintenance Mode option is the best fit?

39. Using the VxRail Plugin, what does VxRail administrator use to compare the current component version state against the expected component version state?

40. Which VxRail cluster can tolerate a host failure?

41. As a VxRail administrator, you must determine how long the rebuild will take after experiencing a hardware failure in the cluster.

When could you locate this information in the vSphere Web Client?

42. Which software component is used to collect real-time log activity for VxRail?

43. A VxRail has been configured with the VxRail-deployed vCenter Server option.

Which service VMs can be optionally hosted on the VxRail cluster?

44. When needed, the vSAN might also break large objects into multiple components.

What is the maximum size of a component?

45. An administrator wants to perform maintenance on a VxRail system.

What should the VxRail Cluster Health Monitoring status be set to before starting the maintenance activity?

46. Which software-defined storage is used by VxRail?

47. A user has three G Series nodes in a VxRail cluster. They are planning to add five additional G Series nodes.

How much additional rack is required to accommodate the new nodes?

48. An environment has two VxRail clusters with the following hardware configuration:

- Cluster-A is using FTT = 2 and FTM = Erasure Coding

- Cluster-B is using FTT = 2 and FTM = Mirroring

A 100 GB VM is planned to be vMotioned from Cluster-A to Cluster-B.

How much more vSAN capacity is consumed in Cluster-B than in Cluster-A?

49. When a RAID-5 storage policy is used, what is the minimum number of VxRail nodes required for vSAN self-healing after a failure?

50. A company has bought VxRail V Series appliances with PCle network cards.

How can the PCle NIC ports be configured in VxRail for data traffic?

51. In which environment is it recommended to enable vSAN deduplication and compression?

52. Which API call asks the VxRail Manager to apply partial modification to a resource?

53. A developer would like to test the VxRail API calls directly in their browser.

What tool should be used for this use case?

54. Which path should be followed to determine how much vSAN capacity is available?

55. What functionality does the iDRAC provide for VxRail nodes?

56. What is a supported feature when using a vSAN HCI Mesh?

57. A VxRail administrator has configured a VxRail stretch cluster with the default distributed virtual switch networks.

Which network is missing?

58. An administrator is trying to monitor vSAN backend IOPS, throughput, and latency in the vSphere Client.

What must be turned on to monitor these metrics?

59. Which VxRail deployment model is recommended in environments that prohibit the use of a corporate DNS server?

60. In a VxRail appliance, which task is performed using VxRail Manager?

61. What is the recommended vSphere HA response to a Datastore with All Paths Down event for vSAN HCI Mesh client clusters?

62. Using the VxRail Manager, what information can be located under the node physical view?

63. What is the fault tolerance method provided by the default storage policy on a newly deployed VxRail all-flash cluster?

64. What is the default time, in minutes, of the vSAN object repair timer?

65. A VxRail administrator is concerned that the NDC is a single point of failure on your VxRail nodes.

What can be done to increase redundancy in this scenario?

66. A construction company is leveraging the benefits of VxRail to support the engineering workloads. The engineers work remotely and utilize graphics intensive workloads. They use computer-aided engineering (CAE) applications for high-end 2D/3D models and digital content creation.

Which VxRail model has been deployed by the company?

67. Which VxRail Manager view displays the storage IOPS, CPU, memory, and storage usage at the VxRail cluster level?

68. A VxRail administrator has been tasked with configuring static LAG for a VxRail cluster vSAN traffic. The ToR switches have already been configured.

Which VDS port group load balancing option should be configured?

69. Which VMware feature will restart the VM on a different host when the original host fails?

70. You are a VxRail system administrator and have received an email alert that a power on the VxRail has occurred. You contact Dell EMC Support and they ask you to run VxRail system diagnostics and send them a log.

Under which tab in VxRail Manager can you find the appropriate Diagnostics button?

71. What are all the actions that can be performed from the Node Information panel of the Physical View of a VxRail E series node?

72. What is the default load balancing policy set for VxRail Port Groups?

73. Which VxRail model series supports only hybrid disks?

74. A customer requires an All-Flash system, with compression and deduplication, RAID-5/6 capability, and Data at Rest Encryption.

Which vSAN license level should be recommended?

75. Which deployed software component is used to collect real-time log activity for VxRail?

76. The VxRail customer wants to change the hostname and IP address of the VxRail Manager VM.

What should be done to complete this task?

77. What is the VxRail API endpoint to get the callhome server information?

78. An administrator is trying to replace the VxRail Manager Certificate.

Where in the vSphere Client is the option located?

79. An administrator wants to get information about a specific host and runs this code:

GET /v1/hosts/{sn}

An API code 404 is returned.

What is the reason for the error code?

80. What is the order of steps to generate the SolVe procedure to add a capacity drive to a VxRail node?

81. What is a network consideration for VxRail version 4 5.x?

82. A customer has a 24-node standard VxRail cluster.

What is the maximum number of VxRail nodes that can be added to this cluster?

83. The VxRail administrator has been given the task of migrating the current production environment to a VxRail cluster with external block storage. The VMs must remain online during the migration.

Which VMware feature can be used?

84. Which fault tolerance level can be configured across sites in a VxRail Stretched Cluster?