DELL EMC D-PDD-DY-23 Dumps (V10.02) – Crack Your Dell PowerProtect DD Deploy 2023 Certification Exam

1. A backup administrator is tasked with verifying the compression savings of a PowerProtect DD3300

Which compression algorithm will they see enabled by default

2. What is a characteristic of Dell Cloud Tier?

3. What needs to be configured when implementing LACP on a PowerProtect DD appliance to gain access to the underlying aggregated link connection?

4. A customer's Power Protect DD system is full. No data can be written or deleted from the system

Which two actions can the customer take to make capacity available on the system? (Select 2)

5. Which three backup applications are supported by the PowerProtect DD VTL? (Select 3)

6. With DSP enabled on a PowerProtect DD appliance, which functions are performed on the backup host?

7. Which are two attributes of PowerProtect High Availability? ( Select 2 )

8. What is the maximum backup speed of PowerProtect DD Virtual Edition using Boost

9. What is the correct practice when creating Fibre Chanel zones between PowerProtect DD and the media server?

10. What rule must be followed during an upgrade procedure with the FS25 expansion shelf?

11. A PowerProtect administrator wants to enable encryption on one of two existing cloud units.

Which statement is true regarding the encryption?

12. Which command is used to add storage to either the active or cloud tier?

13. What is a use case of BoostFS

14. For third party backup applications that do not natively support DD Boost where does the DD Boost plug - in need to installed?

15. What is the maximum number of snapshots per MTree that can be stored on a PowerProtect DD

16. A backup administrator is tasked with verifying the compression savings of a PowerProtect DD9900.

Which compression algorithm will they see enabled by default?

17. During a normal workday an administrator notices poor performance (<1MB/s) in combination with poor global compression rate (<1x).

What metrics should be monitored to find the issue?

18. Which backup application can back up data to a PowerProtect DD system using DD Boost over FC?

19. What system role is required to create the second security officer for a PowerProtect DD?

20. A customer needs a backup system to locally protect 200 TB of mission-critical, post-comp data.

What should be used to back up the system?

21. If PowerProtect DD administrator issue a cifs share destroy command, what is the result?

22. An organization uses tape libraries in their current backup infrastructure. They have purchased a PowerProtect DD system and plan to use VTL to move from tape.

What is a consideration when configuring the tape size?

23. What capabilities are enabled with Retention Lock Governance?

24. An administrator is configuring an Azure cloud unit on their DD6900.

Which certificate must be imported before adding the cloud unit?

25. What is the default listen port used by PowerProtect DD systems for replication?

26. A technician is upgrading a DD9400 with a DS60 expansion shelf with 60 drives. In the GUI interface, only 30 drives are accessible.

What is causing these drives to be inaccessible?

27. Which PowerProtect DD feature protects data from accidental or malicious deletion during its retention time?

28. What is the maximum capacity for an on-premises DDVE with no cloud storage?

29. What are the steps to configure the Retention Lock Compliance?

30. A customer has stored the data that is in the cloud using PowerProtect DD. For security reasons, encryption will be applied to the data.

What is the required action to achieve the customer's goal?

31. A systems administrator wants to change encryption.

Which user role is needed to log in, and what command must be run to enable the security policy?

32. What happens to the data when it is moved from the active tier to cloud tier?

33. A company has DD Retention Lock Compliance enabled on an MTree. The file system is disabled due to tampering of the system clock.

Which user role has the privilege required to enable the file system?

34. A PowerProtect DD appliance with two expansion shelves is being installed in a customer-provided rack.

When cabling the controller to the shelves, what is connected to the host port on the last shelf in the chain?

35. What is the result of using the filesys clean skip schedule estimate-percent-used 30 days 10 command?

36. Which deduplication steps are offloaded when DSP is used?

37. A backup administrator has enabled the Retention Lock feature on their PowerProtect DD appliance. Over time, the administrator noticed an increase in file system utilization.

Upon further investigation, the administrator discovered expired files are still present on the appliance.

What is the most likely reason for this issue?

38. In PowerProtect DD, in which folder are core files, logfiles, and upgrade packages located?

39. Which component of PowerProtect DD is Data Invulnerability Architecture a feature of?

40. What is a requirement to use the PowerProtect DD HA feature?

41. Which type of data replication can only be used with DD Boost on a PowerProtect DD appliance?

42. When using the DD VTL Tape Out to Cloud feature, which status will the tape report on the backup server once the tape is ready for long-term retention?

43. An engineer is deploying a PowerProtect DD6900 system. The installation includes ES40, and DS60 expansion shelves on the same chain.

What consideration should be made when configuring the hardware?

44. What would the log view command display if no log name is specified?

45. An engineer is deploying a new PowerProtect DD9900 system that includes ES40, DS60, and FS25 expansion shelves.

What should the engineer consider when cabling the hardware?

46. Which is required to store and manage archive data on a single PowerProtect DD appliance to comply with regulatory standards?

47. A customer needs a backup system to protect 100 TB of mission-critical data.

What should be used to back up the system?

48. A Power Protect DD system is configured for VTL. The backup application requires a minimum tape capacity of 800 GB.

What is the minimum tape type to support this requirement?

49. An organization uses tape libraries in their current backup infrastructure. They have purchased a PowerProtect DD system and plan to use VTL to move from physical tape.

What is a consideration when configuring the tape size?

50. Which command allows a system administrator to monitor clients active in the past 15 minutes?

51. A PowerProtect DD appliance has been installed at a company’s location for several months and has reached a steady state.

As a best practice, at what percentage of disk utilization should action be taken?

52. Which command is used to start the initial CLI configuration wizard?

53. When accessing an NFS share from a PowerProtect DD appliance, what is the maximum Mount Limit value for restore instances recommended by IBM Spectrum Protect?

54. What is the maximum capacity for a DDVE?

55. Refer to the exhibit.

Match each action to its call-out location. Select and Place:

56. When selecting a PowerProtect DD model, which standard practices should be used to conservatively calculate capacity and throughput?

57. When using CIFS from a PowerProtect DD system, what should be changed on a Windows machine?

58. A backup administrator is tasked with monitoring PowerProtect DD capacity metrics. The administrator is backing up 2 TB of data daily with a reduction rate at 5x. After data reduction, subsequent full backups compress down to 100 GB.

The initial backup requires 400 GB with a 10 percent increase in the data each day. Each incremental backup is 200 GB. After data reduction, each incremental backup is 20 GB.

What is the weekly burn rate (GB) after four daily incremental backups and one weekly backup?

59. What are some possible network bottlenecks for a PowerProtect DD?

60. An administrator has observed degraded read and write throughput performance with their CIFS share.

What can the administrator disable to address the issue?

61. What is one advantage of using PowerProtect DD instead of backing up to other disk-based file systems?

62. Which types of replication are supported in a PowerProtect DD appliance?

63. After adding expansion shelves, an administrator verifies the state of the new disks with the command disk show state is unknown.

Which command will make these disks available?

64. Which method can be used to configure remote logging with syslog?

65. What are the terminal emulation settings that are used to establish serial communication with a PowerProtect DD system?

66. An administrator is using a BoostFS agent running on both Linux and Microsoft Windows servers.

What is the benefit of using BoostFS?

67. What three steps are required to integrate the PowerProtect DD appliance into the IBM Spectrum Protect environment using the NFS protocol on a Linux server? (Select 3)

68. What is the order of steps to configure DD Boost on a PowerProtect DD appliance?

69. A customer needs to use DD Retention Lock Compliance to ensure that data integrity is maintained.

Which PowerProtect DD systems meet the customer’s requirement?

70. An administrator is scaling Cloud Tier for a DD9900 by adding a second cloud unit.

What is the required amount of metadata storage (TB)?

71. Which are supported compression algorithms in DDOS?

72. Which protocols are supported by PowerProtect DD appliances for data movement to the Cloud Tier?

73. A company is using Amazon Web Services as a cloud provider and needs to create a cloud unit.

Which certificate must be imported to the PowerProtect DD appliance?

74. A storage administrator finished the zoning between the PowerProtect DD and the NetWorker backup server.

How can they verify that the zoning was completed properly and the server HBA are visible?

75. Which port/protocol is used when using a syslog server to monitor a PowerProtect DD system?