CompTIA Network+ N10-009 Dumps V14.02 (Part 2, Q41-Q80) – Continue to Read the N10-009 Free Dumps and Check the Quality

1. A network administrator is connecting two Layer 2 switches in a network. These switches must transfer data in multiple networks.

Which of the following would fulfill this requirement?

2. A systems administrator is investigating why users cannot reach a Linux web server with a browser but can ping the server IP. The server is online, the web server process is running, and the link to the switch is up.

Which of the following commands should the administrator run on the server first?

3. Which of the following devices can operate in multiple layers of the OSI model?

4. A critical infrastructure switch is identified as end-of-support.

Which of the following is the best next step to ensure security?

5. Which of the following is the next step to take after successfully testing a root cause theory?

6. Which of the following network devices converts wireless signals to electronic signals?

7. Which of the following connectors provides console access to a switch?

8. A network administrator wants users to be able to authenticate to the corporate network using a port-based authentication framework when accessing both wired and wireless devices.

Which of the following is the best security feature to accomplish this task?

9. Which of the following attacks can cause users who are attempting to access a company website to be directed to an entirely different website?

10. Which of the following should a network administrator configure when adding OT devices to an organization’s architecture?

11. Which of the following are environmental factors that should be considered when installing equipment in a building? (Select two).

12. A network administrator is configuring a wireless network with an ESSID.

Which of the following is a user benefit of ESSID compared to SSID?

13. A network administrator needs to divide 192.168.1.0/24 into two equal halves.

Which of the following subnet masks should the administrator use?

14. A network administrator needs to set up a multicast network for audio and video broadcasting.

Which of the following networks would be the most appropriate for this application?

15. A research facility is expecting to see an exponential increase in global network traffic in the near future. The offices are equipped with 2.5Gbps fiber connections from the ISP, but the facility is currently only utilizing 1Gbps connections.

Which of the following would need to be configured in order to use the ISP's connection speed?

16. Which of the following is used to estimate the average life span of a device?

17. A network administrator is implementing security zones for each department.

Which of the following should the administrator use to accomplish this task?

18. A network engineer is now in charge of all SNMP management in the organization. The engineer must use a SNMP version that does not utilize plaintext data.

Which of the following is the minimum version of SNMP that supports this requirement?

19. After running a Cat 8 cable using passthrough plugs, an electrician notices that connected cables are experiencing a lot of cross talk.

Which of the following troubleshooting steps should the electrician take first?

20. A network architect needs to create a wireless field network to provide reliable service to public safety vehicles.

Which of the following types of networks is the best solution?

21. A network administrator for a small office is adding a passive IDS to its network switch for the purpose of inspecting network traffic.

Which of the following should the administrator use?

22. Which of the following requires network devices to be managed using a different set of IP addresses?

23. Which of the following is most closely associated with a dedicated link to a cloud environment and may not include encryption?

24. Which of the following protocols provides remote access utilizing port 22?

25. Which of the following attacks utilizes a network packet that contains multiple network tags?

26. Which of the following describes the best reason for using BGP?

27. A company's marketing team created a new application and would like to create a DNS record for newapplication.comptia.org that always resolves to the same address as www.comptia.org.

Which of the following records should the administrator use?

28. An organization has a security requirement that all network connections can be traced back to a user. A network administrator needs to identify a solution to implement on the wireless network.

Which of the following is the best solution?

29. A network administrator wants to configure a backup route in case the primary route fails. A dynamic routing protocol is not installed on the router.

Which of the following routing features should the administrator choose to accomplish this task?

30. Which of the following is a characteristic of the application layer?

A. It relies upon other layers for packet delivery.

B. It checks independently for packet loss.

B. It encrypts data in transit.

C. It performs address translation.

31. Which of the following most likely requires the use of subinterfaces?

A. A router with only one available LAN port

B. A firewall performing deep packet inspection

C. A hub utilizing jumbo frames

D. A switch using Spanning Tree Protocol

32. Which of the following steps of the troubleshooting methodology would most likely include checking through each level of the OSI model after the problem has been identified?

A. Establish a theory.

B. Implement the solution.

C. Create a plan of action.

D. Verify functionality.

33. A network administrator wants to implement security zones in the corporate network to control access to only individuals inside of the corporation.

Which of the following security zones is the best solution?

A. Extranet

B. Trusted

C. VPN

D. Public

34. Which of the following disaster recovery concepts is calculated by dividing the total hours of operation by the total number of units?

A. MTTR

B. MTBF

C. RPO

D. RTO

35. SIMULATION

A network administrator has been tasked with configuring a network for a new corporate office. The office consists of two buildings, separated by 50 feet with no physical connectivity.

The configuration must meet the following requirements:

. Devices in both buildings should be able to access the Internet.

. Security insists that all Internet traffic be inspected before entering the network.

. Desktops should not see traffic destined for other devices.

INSTRUCTIONS

Select the appropriate network device for each location. If applicable, click on the magnifying glass next to any device which may require configuration updates and make any necessary changes.

Not all devices will be used, but all locations should be filled.

If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

36. SIMULATION

A network technician replaced an access layer switch and needs to reconfigure it to allow the

connected devices to connect to the correct networks.

INSTRUCTIONS

Click on the appropriate port(s) on Switch 1 and Switch 3 to verify or reconfigure the correct settings:

・ Ensure each device accesses only its correctly associated network.

・ Disable all unused switchports.

. Require fault-tolerant connections between the switches.

. Only make necessary changes to complete the above requirements.

37. SIMULATION

Users are unable to access files on their department share located on file server 2. The network administrator has been tasked with validating routing between networks hosting workstation A and file server 2.

INSTRUCTIONS

Click on each router to review output, identify any issues, and configure the appropriate solution.

If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

38. SIMULATION

You have been tasked with setting up a wireless network in an office. The network will consist of 3

Access Points and a single switch. The network must meet the following parameters:

The SSIDs need to be configured as CorpNet with a key of S3cr3t!

The wireless signals should not interfere with each other

The subnet the Access Points and switch are on should only support 30 devices maximum The Access Points should be configured to only support TKIP clients at a maximum speed

INSTRUCTONS

Click on the wireless devices and review their information and adjust the settings of the access points to meet the given requirements.

If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

39. SIMULATION

You are tasked with verifying the following requirements are met in order to ensure network security.

Requirements:

Datacenter

Ensure network is subnetted to allow all devices to communicate properly while minimizing address space usage

Provide a dedicated server to resolve IP addresses and hostnames correctly and handle port 53 traffic Building A

Ensure network is subnetted to allow all devices to communicate properly while minimizing address space usage

Provide devices to support 5 additional different office users Add an additional mobile user

Replace the Telnet server with a more secure solution

Screened subnet

Ensure network is subnetted to allow all devices to communicate properly while minimizing address space usage

Provide a server to handle external 80/443 traffic

Provide a server to handle port 20/21 traffic

INSTRUCTIONS

Drag and drop objects onto the appropriate locations. Objects can be used multiple times and not all placeholders need to be filled.

Available objects are located in both the Servers and Devices tabs of the Drag & Drop menu.

If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

40. SIMULATION

A network technician was recently onboarded to a company. A manager has

tasked the technician with documenting the network and has provided the technician With partial information from previous documentation.

Instructions:

Click on each switch to perform a network discovery by entering commands into the terminal. Fill in the missing information using drop-down menus provided.