Choose the Latest LEED AP ID+C Study Guide to Make Preparations – DumpsBase’s LEED AP ID+C Dumps (V8.02) Help You Stand Out

1. The project team for a bank project located in a mall is wondering whether they can earn Location and Transportation Credit Surrounding Density and Diverse Uses, Option 2. Diverse Uses.

When evaluating a map of nearby diverse uses, which of the following would you recommend to be entered in the calculation?

2. In the pre-design phase, a plumbing engineer identified that the low-flow fixtures which met the Owner's requirements could achieve total reductions in indoor water usage of 39%.

Which strategies should be assessed to meet the Owner's Project Requirements goals of 45% reduction?

3. Which project team members should be present at a goal setting workshop when using an Integrative Process project approach?

4. For the achievement of Materials and Resources Credit, Interiors Life Cycle Impact Reduction, Option 1. Interior Reuse, how are hazardous materials accounted for in the calculation?

5. Which of the following would contribute to the Location and Transportation Credit, Surrounding Density and Diverse Uses, Option 2. Diverse Uses?

6. The project material costs for Building Product Disclosure and Optimization cost-based credits are

7. Best practices recommend that the LEED AP confirm that minimum program requirements have been met

8. What should a team focus on first to significantly improve energy performance or achieve the lowest possible operation cost?

9. A project is pursuing Indoor Environmental Quality Credit, Interior Lighting, Option 1. Lighting Control.

Which lighting control could the design team specify to meet the credit requirements for open-office workstations?

10. A tenant moving into an existing building will need to install new HVAC, power, lighting systems and other equipment.

Which of the following resources would help the tenant meet the requirements of Energy and Atmosphere Credit, Optimize Energy Performance?

11. A project has access to two alternative water sources.

How should they determine which source to use where?

12. Source reduction appears at the top of the Environmental Protection Agency's (EPA's) hierarchy because it

13. An owner has expressed concerns to the LEED AP about the costs associated with the integrative process.

How can the LEED AP relieve the owner's concerns?

14. To satisfy the Increased Ventilation strategy in the Indoor Environmental Quality Credit, Enhanced Indoor Air Quality Strategies, the breathing zone rates of outdoor air ventilation to all occupied spaces must be increased above the minimum rates required in ASHRAE 62.1-2010 by at least what percentage?

15. Which of the following phases should be included in the Integrative Process Credit, Integrative Process in order to comply with the intent of this credit?

16. A tenant implements the following strategies to reduce the amount of water used.

Which strategy is applicable to the Water Efficiency Credit, Indoor Water Use Reduction for LEED Interior Design and Construction: Commercial Interiors?

17. Which of the following must be considered in order to meet Energy and Atmosphere Prerequisite, Fundamental Refrigerant Management if the tenant requires 24-hour cooling in a server room?

18. A tenant with 1,000 employees wishes to pursue LEED Interior Design and Construction Certification for their space in which they will be the sole tenant.

Which of the following building attributes will help the tenant achieve points in the Location and Transportation category?

19. If the client has purchased green power that is not Green-e certified, then the project team should

20. Discussing the project goals to help identify the credits and options that the team should attempt is an example of

21. Which material would have the largest contribution to Materials and Resources Credit, Building Product Disclosure and Optimization- Sourcing of Raw Materials, Option 2. Leadership Extraction Practices?

22. A project team is pursuing certification for a medical clinic with 150 full time employees and 250 peak visitors. The project team is considering the Location and Transportation Credit for Bicycle Facilities. Providing which of the following is a minimum requirement to earn the credit?

23. A project has performed an energy model which has resulted in the following energy end use consumption:

To meet the requirements for Energy and Atmosphere Credit, Advanced Energy Metering, Option 2. Advanced Metering, energy meters must be installed for energy end uses in

24. A luxury hotel project is one point away from attaining LEED Platinum certification. The LEED AP is recommending that the team pursue Innovation Credit, Innovation, Option 3. Additional Strategies.

Which of the following credits would be applicable?

25. A project team wants to achieve Materials and Resources Credit, Building Product Disclosure and Optimization - Material Ingredients.

By what means can a product demonstrate their material ingredient optimization?

26. A renovation project includes both a new kitchen sink and shower and an existing lavatory and water closet within the LEED project boundary.

How would the project perform the Water Efficiency Credit, Indoor Water Use Reduction calculations?

27. A project team chooses to pursue the Integrative Process Credit.

Which of the following credits can be affected by early planning? (Choose One Answer only)

28. Which of the following information is needed to document the non-structural elements that will be reused from the existing space in a LEED AP Interior Design and Construction project?

29. When developing the overall energy strategy of the project, which credit should the client consider to work synergistically with the Energy and Atmosphere Credit, Enhanced Commissioning, on an ongoing basis?

30. A tenant is soliciting proposals for a Commissioning (Cx) agent for Energy and Atmosphere Credit, Enhanced Commissioning.

Which qualification must the agent meet?

31. Which of the following appliances are included in Water Efficiency Prerequisite, Indoor Water Use Reduction?

32. In a goal-setting workshop, a decision is made to place circulation at the exterior of the office perimeter next to the window wall.

Which of the following is an example of integrated decision-making?

33. A proposed LEED project will be located within the boundary of a development that has been successfully certified at the Silver level under LEED for Neighborhood Development. The project will earn 10 points from the Location and Transportation Credit, LEED for Neighborhood Development Location.

How many additional credit points are available to the project team under the Location and Transportation category?

34. Which of the following would achieve an exemplary performance credit?

35. According to the Integrative Process Credit, Integrative Process the discovery phase of site selection for an existing building should identify