Buying ISTQB Certified Tester CTFL_Syll2018 Dumps Questions (V9.02): A Critical Decision for Certified Tester Foundation Level CTFL Exam Preparation

There are two important points to note about the Certified Tester Foundation Level (CTFL) certification:

  1. CTFL Syllabus 4.0 is the most recent version of the ISTQB Certified Tester Foundation Level certification.
  2. CTFL Syllabus version 3.1 (2018) will remain accessible until May 9, 2024.

The ISTQB Certified Tester Foundation Level (Syllabus 2018) CTFL_Syll2018 exam is still available. When preparing for the CTFL_Syll2018 exam, you need to choose the right study materials and DumpsBase should be the best option for your exam preparation. To ensure your success in the CTFL_Syll2018 exam, it is crucial to rely on the updated CTFL_Syll2018 dumps questions (V9.02) of DumpsBase. All those dumps questions and answers provide accurate and up-to-date information that aligns with the exam syllabus. They are created by professionals who have in-depth knowledge of the subject matter and understand the exam requirements. By buying CTFL_Syll2018 exam dumps of DumpsBase, you can confidently prepare for the exam, knowing that you are studying the right content and increasing your chances of success.

Free ISTQB Certified Tester Foundation Level CTFL_Syll2018 Dumps Demo Is Available:

1. Which of the following errors CANNOT be found with structure-based testing techniques?

2. Which of the following is correct?

3. The following sentences refer to the Standard for Software Test Documentation' specification (IEEE 829).

Which sentence is correct?

4. A software company adopts the V-model as their development life cycle.

Which of the following contains roles of a tester in this company?

5. Which of the following is an appropriate reason for maintenance testing?

6. Once a bug is fixed, it should be retested.

What is the term used to define this type of testing?

7. What is the difference between system integration testing and acceptance testing?

8. Which of the following is NOT an example of a common test metric?

9. Which of the following is NOT a deciding factor in determining the extent of testing required?

10. What does the term Pesticide paradox' refer to?

11. Which of the following test techniques is structure-based?

12. Which of the following test types is a part of the V-Model?

13. Which of the following statements is correct?

14. In foundation level syllabus you will find the main basic principles of testing, which of the following sentences describes one of these basic principles?

15. Which of the following is an example of black-box dynamic testing?

16. Where and by whom is Beta testing normally performed?

17. Which of the following is NOT an objective of testing?

18. Which statement about use case testing is true?

19. When testing a mission critical system a high coverage should be achieved.

Which of the following techniques should be implemented as a structural based coverage technique in order to achieve highest coverage?

20. Which of the following is NOT an example of a typical risk-based testing activity?

21. The following program part is given:

IF (condition A)

then DO B

END IF

How many test cases are necessary in order to achieve 100% statement coverage?

22. Which of the following tool types is the most useful one for a test manager?

23. The following diagram lists various types of operating systems, databases and application servers supported by the application under test.

For complete coverage of all combinations, how many combinations of the above are to be tested?

24. Which of the following is NOT a factor on which test estimation is dependent upon?

25. Which of the following is a task of the Test Analysis and Design activity of the test process?

26. Given the following requirement:

Which of the following statements is NOT correct?

27. Which of the following defect types are LEAST likely to be discovered when using static analysis tools?

28. Out of the following, what is not needed to specify in defect report?

29. Which ONE of the following statements does NOT describe how testing contributes to higher quality?

30. Testing should provide sufficient information to stakeholders to make informed decisions about the release of the software or system being tested.

At which of the following fundamental test process activity the sufficiency of the testing and the resulting information are assessed?

31. A Software was re-deployed because the backend database was changed from one vendor to another The Test Manager decided to perform some functional tests on the redeployed system.

This is an example of test of which test type?

32. Which of the following is a correct set of boundary values to test the "Group Size" parameter, as defined by the following statement;

"In a reservation system for groups visiting a small museum, the graphical user interface presents a field asking the number of group members. Group size can be anywhere from 2 to 20 visitors"

33. A software company decided to buy a commercial application for its accounting operations. As part of the evaluation process, the company decided to assemble a team to test a number of candidate applications.

Which team would be the most suitable for this goal?

34. Send "reservation ready" message to a borrower

Which of the following test sequences represents a possible use case? (a test sequence always start with test #1)

35. A money order system is designed to calculate the charge for a transfer

- Amounts from 1 to 1999 are charged EUR 10.

- Amounts from 2000 to 5000 are charged EUR 15

- Amounts below EUR 1 or above EUR 5000 are not accepted.

Assume that only integer values can occur.

Which of these sets of amounts covers all equivalence classes?

36. The following incident report that was generated during test of a web application

What would you suggest as the most important report improvement?

Defect detected date: 15.8.2010

Defect detected by. Joe Smith

Test level System test

Test case Area 5/TC 98

Build version: 2011-16.2

Defect description After having filled out all required fields in screen 1,1 click ENTER to continue to screen 2. Nothing happens, no system response at all.

37. Which of the following statements is true?

38. An organization is working on updating test cases for a particular module of their software.

Sam updated a set of test cases yesterday and saved the new version on his PC.

Unfortunately, the hard disk of his PC crashed, and his work was lost.

The IT department of the organization restored the contents of his hard disk with the last available back-up - from the previous morning However the changes made by him yesterday were lost forever Which of the following tools, had it been used, would have prevented the loss of Sam's updates?

39. Which of the following statements about decision tables are TRUE?

I, Generally, decision tables are generated for low risk test items

II, Test cases derived from decision tables can be used for component tests.

III, Several test cases can be selected for each column of the decision table.

IV, The conditions in the decision table represent negative tests generally.

40. "Statement Testing" is part of;

41. The four test levels defined for a common V-model testing approach are:

42. Typically, exit criteria may consist of:

43. A data driven approach to test automation design is best described as:

44. Which of the following risks represents the highest level of risk to the project?

45. What factors should be considered to determine whether enough testing has been performed?

(i) The exit criteria.

(ii) The budget.

(iii) How big the test team is.

(iv) The product's risk profile.

(v) How good the testing tools are.

(vi) Sufficient details of the system status to allow decisions

46. Which of the following statements is most true about test conditions?

47. End

How many test cases are needed to achieve 100 per cent decision coverage?

48. What is static analysis?

49. Component testing may include:

50. Which type of review has the following main purposes:

discussing, making decisions, evaluating alternatives, finding defects, solving technical problems and checking conformance to specifications, plans, regulations, and standards?

51. End

What is the minimum number of test cases required to guarantee both 100% statement coverage and 100% decision coverage?

52. Which of the following best describes the Black-box technique?

53. System testing is:

54. A client-server system for a web development must support a minimum of 200 enquiries per hour. In peak times, it must be available 24 hours x 7 days due to the critical nature of the application, and must have a response time lower than 20 seconds during peak loads.

Which of the following set of test types would be most appropriate to verify the non-functional requirements expressed in this statement?

55. When an organization considers the use of testing tools, they should:

56. Which of the following test design techniques is not a black box technique?

57. Which of the following are valid test objectives?

(i) Finding defects.

(ii) Gaining confidence about the level of quality and providing information.

(iii) Preventing defects.

(iv) Debugging the code.

58. What can testing demonstrate?

59. Equivalence Partitioning is best defined as:

60. Dynamic Analysis Tools are used to:

61. What other details should be included in the following incident report when it is first submitted?

Date of Issue: 23/11/05

Severity: P1

Build: Version15.6

Details: Expected field to be limited to 15 chars, able to enter 27

62. Which of the following are 'Exit Criteria?'

63. What is decision table testing?

64. Which of the following, select the best description of the fundamental test process:

65. Which of the following processes ensures that all items of testware are identified, version controlled, tracked for changes, so that traceability can be maintained throughout the test process?

66. What is the value of static code analysis?

67. Which of the following statements about use-case testing are most accurate?

(i) In a use-case diagram an actor represents a type of user.

(ii) Use-cases are the most common test basis for unit testing.

(iii) A use-case describes interactions between actors.

(iv) An actor is always a human user that interacts with the system.

(v) Test cases can be based on use-case scenarios.

(vi) Use-case testing will often identify gaps not found by testing individual components.

68. It is recommended to perform exhaustive tests for covering all combinations of inputs and preconditions.

69. Refer to the exhibit

Given the following State Transition diagram, match the test cases below with the relevant set of state transitions.

(i) X-Z-V-W

(ii) W-Y-U-U

70. A system calculates the amount of customs duty to be paid:

_ No duty is paid on goods value up to, and including, $2,000.

_ The next $8,000 is taxed at 10%.

_ The next $20,000 after that is taxed at 12%.

_ Any further amount after that is taxed at 17%.

To the nearest $, which of these groups of numbers fall into three DIFFERENT equivalence classes?

71. What are metrics NOT used for?

72. Which of the following is a white box testing design characteristic?

73. In a system designed to work out the employee tax to be paid:

_ An employee has $4,000 of salary tax free.

_ The next $1,500 is taxed at 10%.

_ The next $28,000 after that is taxed at 22%.

_ Any further amount is taxed at 40%.

Which of these is a valid Boundary Value Analysis test case?

74. What is a test condition?

75. Which of the following test organizations has the highest level of independence?

76. Which of the following would NOT be a typical target of testing support tools?


 

Updated CTFL_SYLL_4.0 Exam Dumps (V9.02): Pass Your ISTQB Certified Tester Foundation Level (CTFL) Certification Exam
How to Complete the ISTQB Certified Tester Foundation Level (CTFL) Certification?

Add a Comment

Your email address will not be published. Required fields are marked *