Axis ANVE Dumps (V9.03) – Use the Latest Study Materials to Prepare for Your Axis Network Video Exam

1. Which of the following statements are true for H.264? (Choose two)

2. What is the main purpose of the Arctic Temperature Control functionality?

3. Which is true regarding the use of a smoked (tinted) dome instead of a clear dome?

4. A company is looking for a dome designed to withstand vibrations inherent to transportation.

Which of the following cameras should be recommended?

5. Which is a benefit of using VLANs and IP subnets?

6. DRAG DROP

Match each function to the correct video surveillance system component. Drag each gray box from the left column to the matching blue box in the right column.

7. In many places 24 V AC has been popular as a power source but now 12 V and 24 V DC is increasing in popularity because

8. When initiating a surveillance project with a customer, which of the following should be considered first?

9. Which of the following are outdoor rated products? (Choose two)

10. DRAG DROP

Match the protocol to its default port number. Drag each gray box from the left column to the matching blue box in the right column.

11. Which of the following allows customer to access between 2-4 channels of live and online stored video at any time?

12. Axis recommends shielded cables for outdoor installations primarily to ensure

13. In setting up PTZ control for an Axis encoder, it's very easy to overlook a very important step in the configuration process. After properly connecting the communication wires to the encoder, the next recommended step in the setup is:

14. Which setting would best adjust a hard yellow tint as shown in the pictures below?

15. Which is an impact on cameras that are operating above their specified temperature limit?

16. Which technology can a Video Management Software (VMS) partner incorporate to reduce the impact on recorded video during server maintenance?

17. A customer has a lot of motion blur on recordings from a fixed camera.

What would be the most likely setting to address the blurring?

18. Which statement is true regarding H.264 and Motion JPEG?

19. Which of the following will allow a customer to have a PTZ camera automatically change between three predefined positions?

20. In a network surveillance installation, the purpose of a router is to

21. Which of the following conditions has to be met to use multicast streaming?

22. With Axis Coverage Shapes, the designer can

23. In order to comply with SMPTE standards of HDTV, the camera must meet the following:

24. Which is true about P-iris?

25. The Axis pixel counter allows a user to

26. Which of the following actions can be taken using the AXIS T8414 Installation Display? (Choose two)

27. If a camera is pointed down a hallway with no windows and the color seems "washed out" or faded, which of the following settings should first be adjusted to improve the image?

28. In a switched network with Unicast

29. Who should be responsible for documenting a video surveillance installation?

30. A Privacy mask added to Live View (Choose two)

31. An analog system that should be upgraded to IP using encoders must have the end of the analog signal terminated.

How many Ohm () should that be?

32. A customer asks for a fixed mini dome with a DC-iris lens. 2.8-10 mm varifocal lens and wide dynamic range.

Which of the following cameras is the only choice to fit all of the requirements?

33. Working with a retailer on a site survey, they ask if there's any way to get more of the aisle and less of the shelves on the short sides in the shot. An AXIS M3204 camera is being used.

Which would be the best suggestion to the retailer?

34. The capability to view and record up to four different areas of the whole image of an AXIS P1346 is called

35. DRAG DROP

Match the best choice of camera to each scenario described. Drag each gray box from the left column to the matching blue box in the right column.

36. What is the appropriate usage for an Axis thermal camera?

37. Increase of bandwidth and storage can be a result of (Choose two)

38. A camera lens with a low f-stop value of 1.2 will outperform a lens with a higher f-stop value due to which one of the parameters below?

39. A customer wants his video surveillance system to completely cover the perimeter of his property. For the installer to ensure that the camera system is not subject to sabotage, he should

40. In what way does VAPIX ® help integrators?

41. A customer is not getting the storage retention they had expected while using H.264 with an AXIS Q6034-E PTZ camera on a continuous guard tour.

What is the most likely cause of the problem?

42. After an installer sets up a motion detection window they then zoom out the camera.

How will this affect the camera's ability to detect motion if no settings are changed?

43. Working with the end user, you find that they need a cost-effective mini dome with a varifocal lens. DC-iris and audio capabilities are not required.

Which of the following products would best fit the requirements?

44. Before upgrading firmware, which of the following should be checked?

45. Image flickering is caused by

46. In a dark indoor environment one single Axis illuminator is available. At a distance of 1 m (3 ft 3 in) away from the illuminator the light intensity is 1024 lux.

At what distance from the light source will the light intensity be 256 lux?

47. Which statement is true for broadcast network traffic?

48. The purpose of a DNS server is to

49. What is the benefit of deinterlacing the video in a video encoder?

50. How does the AXIS Design Tool allow users to estimate the effects of scene complexity and motion on bandwidth and storage usage?

51. What is the difference between a zoom lens and a varifocal lens?

52. Looking at the picture below, which setting would best address the blurring that's occurring with faster moving objects?

53. Which API is used to ensure interoperability between products from different vendors?

54. When using the AXIS Design Tool, what is the most important message to bring to your end user?

55. Which security features are provided through a managed switch?