Pass the Veritas VCS-285 Exam with DumpsBase’s Updated Dumps – VCS-285 Dumps V9.02 Online Today

1. A client host s NetBackup certificate is invalid. The certificate has expired, been revoked, or lost.

What does the administrator need to do to re-establish secure communications?

2. Weekly full backups run for clientA on primary1 using a storage unit that belongs to medial. The administrator is required to retain clientA's full backups for a period of four months. When the administrator modifies the full schedule, an option for 4 months is missing from the Retention drop-down list.

How can the administrator add a four-month retention?

3. Which two new Storage Lifecycle Policy (SLP) parameters have been introduced to manage small replication jobs more efficiently in NetBackup version 10.1? (Select two.)

4. Which type of disk storage supports replication while creating a disk pool?

5. Refer to the exhibit.

Which diagram is supported for backups spanning BasicDisk storage?

6. What happens if the "Maximum data streams" property is enabled in the General tab of Client Attributes for a particular client?

7. An administrator needs to store secure tape copies of protected data to an offsite location.

How can the administrator automatically eject tape media daily and create detailed reports?

8. Which two storage types are supported for Auto Image Replication? (Select two.)

9. Which two commands can an administrator use to configure WORM (Write Once, Read Many) media? (Select two.)

10. Which action is performed by the NetBackup deduplication plug-in?

11. Which security algorithms are used for MSDP in NetBackup?

12. Which command should an administrator use to create a cloud immutable (WORM) storage volume?

13. Which step must an administrator complete prior to configuring a new NBU-Catalog policy?

14. Which files are removed v/hen you enable the Intelligent Catalog Archiving (ICA) feature?

15. Which information is validated during an image verification operation?

16. An administrator uses the NetBackup Administration Console to expire NetBackup images, but the flat file component of the image remains in the catalog.

What is the maximum amount of time it will take NetBackup to remove the expired flat files from the catalog, by default?

17. Which two options are available to an administrator to bring the MSDP catalog back online in the case of a hardware problem that caused corruption? (Select two)

18. Where can an administrator add or list the service providers for cloud storage?

19. Some NetBackup jobs are affected by the failure of a disk in an Advanced Disk pool, but the jobs are unavailable to view in the Activity Monitor.

In which two places can the administrator view NetBackup jobs affected by the disk failure? (Select two.)

20. An administrator has identified hardware errors in a disk that is used as an advanced disk storage pool.

Which report should the administrator run to identify images that might be corrupted?

21. An administrator notices that backups are failing for clients added to a new backup policy. The backups attempt to run again after 10 minutes.

How can the administrator modify the time between failed backup re-attempts?

22. A NetBackup primary server has many backups running each night to an MSDP pool that take a long time to complete. While these backups are running, replication jobs are queued.

Which action should the administrator perform to ensure replications can occur without waiting for the backups to complete?

23. Which action does the DISALLOW_SERVER_FILE_WRITES in a Client's configuration perform?

24. Which data is restored if the restore file is a symbolic link?

25. A NetBackup Administrator wants to create an Role-Based Access Control (RBAC) role to restrict some users from being able to change the expiration date of backup images.

Which global RBAC permission category has the option to configure this permission?

26. Which utility can an administrator use to manage package repositories?

27. How are install packages for a deployment policy execution obtained?

28. An administrator notices that malware scans are failing to run on a particular scan host.

What is one possible cause of the issue?

29. How can an administrator locate NetBackup job activity using the appliance interfaces?

30. An administrator notices that after a data erasure process is complete, the erased disks are in an unusable state.

Which operation should the administrator perform to restore the disks to a usable state?

31. An administrator has enabled STIG (Security Technical Implementation Guide) rules to increase the security of an appliance.

What is the maximum number of concurrent SSH sessions allowed?

32. Which communication protocol and port does the Appliance Management Server use to communicate with Appliance Management agents?

33. When powering an appliance on, it fails to complete the Power On Self Test (POST).

Which two monitoring tools should the administrator use to gather information regarding the problem? (Select two.)

34. Which step should an administrator perform to ensure all data in an existing MSDP pool is encrypted?

35. A NetBackup Appliance Administrator is working with other system administrators to optimize network performance for backup traffic.

Which appliance CLISH command should the Appliance Administrator use to view traffic flow in real-time on each network port?

36. A NetBackup appliance administrator observes poor performance on backups to an MSDP pool. The job details indicate bpbkar is waiting for empty buffers.

Where should the administrator tune the appliance?

37. An administrator has a MS-Windows type policy that has failed for a Microsoft Windows NetBackup client. The policy uses the ALL_LOCAL_DRZVES backup selection.

See the extract from the end of the job details below:

12/21/2016 19:28:28 - Error bpbrm (pid=32680) from client client1: ERR - failure reading file: C:Program Files (x86) AdobeReader 10.0ReaderLocalenb_NOAcroform.NOR (WIN32 2: The system cannot find the file specified.)

12/21/2016 19:28:29 - Error bpbrm (pid=32680) from client client1: ERR - Snapshot Error while reading file: GLOBALROOTDeviceHarddiskVolumeShadowCopy12Program File: (x86) AdobeReader 10.0Reader/Localenb_NOAcroform.NOR

12/21/2016 19:23:29 - Critical bpbrm (pid=32680) from client client1: FTL - Backup operation aborted!

12/21/2016 19:2B:29 - Info bpbkar (pid=54308) accelerator sent 6220537344 bytes: out of 6173181440 bytes to server, optimization 0.0%

12/21/2016 19:28:32 - Error bptm (pid=32683) media manager terminated by parent process

12/21/2016 19:28:34 - Inio Mledia02 (pid=32683) StorageServer=PureDisk: Maedia02; Report=PDDO Stats for (Media02): 6029360 KB, CR sent: 14075 KB, CR sent over EC: 0 KB, dedup:99.8%, cache disabled

12/21/2016 19:28:35 - Info bpbkar (pid=54308) done. status: 156: snapshot error encountered.

12/21/2016 19:28:35 - end writing; write time: 0:14:05

12/21/2016 19:28:37 - Info bpbrm (pid=38719) Starting delete snapshot processing

12/21/2016 19:28:41 - Info bpfis (pid=57120) Backup started

12/21/2016 19:28:41 - Critical bpbrm (pid=38719) from client client1: cannot open C:Program FilesVeritasNetBackuponline_utilfi_cntlbpfis.fim.client1_1482365660.1.0

12/21/2016 19:28:41 - Info bpfis (pid=57120) done. status: 1542

12/21/2016 19:28:41 - Info bpfis (pid=57120) done. status: 1542: An existing snapshot is no longer valid and cannot be mounted for subsequent operations snapshot error encountered (156)

Which two logs will provide the most relevant information for troubleshooting and resolving the error? (Select two.)

38. An administrator has a job that has failed. Upon reviewing the Detailed Status tab for the job: the administrator sees the following information:

05/23/2016 03:58:45 - Info nbjm (pid=84600) starting backup job (jobid=74455) for client CLIENT-01, policy POLICY-01, schedule Full

05/23/2016 03:58:45 - Info nbjm (pid=84600) requesting STAMIDAR_DRESOURCE resource: from RB for backup job (jobid=74455, request id: {CFBE16EE-2163-11E6-8982-AB03C077A760})

05/23/2016 03:58:45 - requesting resource MEDIA-SERVER-01

05/23/2016 03:58:45 - requesting resource MASTER-01.NBU_CLIENT.MAXTOBS.CLIENT-01

05/23/2016 03:58:45 - requesting resource MASTER-01.NBU_POLICY.MAXJOBS.POLICY-01

05/23/2016 03:58:45 - Info nbrb (pid=8454) Limit has been reached for the loagical resource NASTER-01.NBT_POLTCY . MAXJOBS.POLICY-01 client backup was: not attempted because backup window closed (196)

Which setting value prevented the job from running during the backup window?

39. A backup job fails with the status code of 96. To troubleshoot the failure, the administrator v/ants to view the application log files written by the NetBackup Resource Broker.

Which command should the administrator run to find the date, time and actual message text from the log file?

40. An administrator is experiencing a communication issue between the master and client and believes the certificate might be revoked.

Which log can the administrator view to analyze a certificate issue?

41. Refer to the exhibit.

A backup job configured with a retention level of 2 and "Policy volume pool" set to the "server_tapes" is failing due to status code 96: Unable to allocate new media for backup.

See the output of the available_media command below:

Which task in the NetBackup Administration Console should the administrator perform to resolve the status code 96 error?

42. An administrator views the following errors from the Detailed Status tab of a failed job in the Activity Monitor.

03/01/2016 11:54:25 - Info bpbrm (pid=7220) connect failed STATUS (18) CONNECT_FAILED

03/01/2016 11:54:25 - Info bpbrm (pid=7220) status: FAILED, (24) BAD_VERSTON; system: (10036) A blocking operation is currently executing.; FROM 192.168.10.201 TO CLIENTIAME 192.168.10.251 bpcd VIA pbx

03/01/2016 11:54:25 - Info bpbrm (pid=7220) status: FATIED, (42) CONNECT_REEUSED; system: (10061) No connection could be made because the target machine actively refused it.; FROM 192.168.10.201 TO CLENTNAME 192.168.10.251 bpcd VIA vnetd

03/01/2016 11:54:25 - Info bpbrm (pid=7220) status: FATIED, (42) CONNECT_REEUSED; system: (10061) No connection could be made because the target machine actively refused it.; FROM 192.168.10.201 TO CLENTNAME192.168.10.251 bpcd

03/01/2016 11:54:25 - Error bpbrm (pid=7220) Cannot connect to CLIENTNAME

03/01/2016 11:54:25 - Info apibkar32 (pid=0) done. status: 58: can't connect to client

03/01/201611:54:25 - end writing can't connect to client (58)

Which command should the administrator perform to test the communication between the primary server and the client based on the output?

43. An administrator observes intermittent connectivity issues between the appliance and clients.

Which NetBackup Appliance Shell Menu (CUSH) command can the administrator use to assist in diagnosing the problem?

44. An administrator wants to use a client as the VMware backup host.

Where is the name of the VMware backup host entered in NetBackup?

45. An administrator configures a policy to perform file system backups of multiple client systems using the "Allow multiple data streams" feature. All other policy attributes are at default settings.

Which primary server host property must be configured to enable the backup job from all clients to run concurrently?

46. An administrator needs to ensure the channel on which NetBackup clients send metadata and data to NetBackup servers is secure.

Which NetBackup feature should the administrator select to ensure the requirement is met?

47. Which feature is unavailable for all NetBackup cloud providers when configuring cloud storage using the Cloud Storage Server Configuration wizard?

48. Which storage unit group selection is based on a capacity-managed approach?

49. Which storage unit type supports a staging schedule?

50. An administrator needs to ensure backed up data is protected from being encrypted or deleted.

Which option should the administrator select when creating an MSDP storage unit?