Outstanding D-RP-DY-A-24 Dumps Updated (V9.02) – Achieve Guaranteed Success in Dell RecoverPoint Deploy Exam

1. A new RecoverPoint/SE environment has been installed with a single cluster. There are no limitations regarding journal sizes and you want to choose how frequently RecoverPoint can create point-in-time copies.

What is the highest frequency available for point-in-time copies in this environment?

2. Which RecoverPoint product(s) may be licensed by the amount of array capacity?

3. What is the maximum supported storage capacity, per license, for an EMC RecoverPoint/EX environment?

4. What is the maximum number of clusters supported in an EMC RecoverPoint/CL environment?

5. In a EMC RecoverPoint environment, which EMC product adds support for heterogeneous storage systems?

6. Which EMC storage technologies are supported with EMC RecoverPoint?

7. What is the maximum number of copies of production data supported with RecoverPoint?

8. There is one instance of RecoverPoint/CL installed that is protecting data within a data center.

What is the maximum number of additional clusters that can be added to this configuration?

9. Your business is planning to deploy RecoverPoint for your DR solution.

What is an important consideration when using Consistency Groups in RecoverPoint 4.1?

10. Which Ethernet interface on an RPA is used for replication to the remote clusters?

11. Which Ethernet interface on an RPA is used for management?

12. Through what does RecoverPoint support heterogeneous storage environments?

13. Which virtualization solution components are supported by RecoverPoint?

14. What is the maximum number of copies supported using the MetroPoint topology for VPLEX continuous data replication?

15. Which protocol does the vRPA use to access the journal volumes?

16. A company is using an EMC VNX storage array. RecoverPoint is being configured to replicate to a DR site.

RP will be protecting three datastores:

- A thick 100 GB LUN containing 60 GB of data

- A thin 50 GB LUN containing 15 GB of data

- A thick 75 GB LUN containing 75 GB of data

How much of the user data is being replicated to the DR site?

17. What is the maximum number of RPA clusters allowed in a RecoverPoint/SE configuration?

18. Which RecoverPoint feature requires the production copy to be located on a VNX?

19. Snap-based Replication requires the production volume of a Consistency Group to be on which array type?

20. A storage administrator has been tasked to demonstrate the image access capability of RecoverPoint.

Which RecoverPoint option should they use?

21. A RecoverPoint cluster contains a Consistency Group with one remote copy.

Which volume can be used to verify that snapshots are being created?

22. Which RecoverPoint features are supported on physical and virtual RPAs?

23. What is the minimum number of RecoverPoint Clusters required to use the MetroPoint feature?

24. A company recently acquired a new DR site and requires local Fibre Channel based production data to be replicated synchronously. They are investigating what infrastructure is needed on this DR site.

What is an important connectivity consideration?

25. A company recently acquired a new DR site and requires their production data to be replicated to this DR site.

What is an important consideration about the RecoverPoint out-of-band architecture?

26. An existing RecoverPoint/CL environment consists of one cluster at the main office and two off-site DR clusters. You have been asked to expand the environment to the maximum number of DR sites using RecoverPoint.

How many additional clusters could be added to this RecoverPoint Environment?

27. An existing RecoverPoint/CL environment consists of one cluster at the main office and one off-site DR cluster. You have been asked to expand the environment to the maximum number of DR sites using RecoverPoint.

How many additional clusters could be added to this RecoverPoint Environment?

28. Which RecoverPoint family is licensed per array and array capacity?

29. What are the minimum RecoverPoint and VPLEX versions that support MetroPoint?

30. What are key use cases for RecoverPoint?

31. An existing RecoverPoint cluster has four physical RPAs deployed with VMAX arrays.

Which RPAs need to be masked to the VMAX gatekeepers in order to deploy the VMAX splitter?

32. A customer is installing a new RecoverPoint environment. All RPAs have been racked, cabled, and powered on. You have chosen to automatically discover the RPAs using Deployment Manager. After running the discovery, no RPAs are found.

What is the most likely cause of this issue?

33. You are adding a VMAX array to a RecoverPoint/CL environment.

What needs to be done?

34. A customer has three VMAX arrays and one VNX array fronted by an EMC VPLEX. They want to use RecoverPoint to protect their environment.

How many licenses, of which type, would be required for their environment?

35. A customer has two VMAX arrays and three VNX arrays fronted by an EMC VPLEX. They wish to use RecoverPoint to protect their environment.

How many licenses, and of which type, would be required for their environment?

36. Which connectivity protocols are used to interconnect RecoverPoint clusters?

37. What information is required to connect a new RecoverPoint cluster to an existing one?

38. You are installing RecoverPoint/SE, and have selected the automatic zoning option. There are four VNX ports in each fabric.

How many zones are automatically created on each fabric for a two-node RPA cluster?

39. When using Deployment Manager to install RecoverPoint/SE, which zoning methods are available with Brocade switches?

40. What must be installed on the VNX prior to deploying the RecoverPoint Write splitter?

41. You are responsible for installing a four-node RPA cluster. All RPAs are powered on. Both the FC and IP networks are connected, zoned, and routed properly. The RPAs are loaded with the latest image and IP addresses are set. However, Deployment Manager cannot discover RPAs.

What is a possible cause?

42. When choosing a journal for a CG what would be a factor in selecting which LUNs to use?

43. After expanding to include an additional existing RecoverPoint cluster you use Deployment Manager to connect the clusters, but it fails.

What might be the problem?

44. After expanding to include an additional existing RecoverPoint cluster you use Deployment Manager to connect the clusters, but it fails.

What might be the problem?

45. A new RecoverPoint system is being installed and the RPAs need to be upgraded to the latest version.

How should this be done?

46. After installing two RecoverPoint clusters you find that a Consistency Group cannot be configured with a remote copy.

Why?

47. A customer is interested in implementing a RecoverPoint solution using a four-node cluster with physical RPAs.

How many total IP addresses are required for the cluster?

48. A customer wants to implement a two-node RecoverPoint solution with local replication. How many IP addresses are required for each cluster?

49. A customer environment includes a two-cluster RecoverPoint/SE instance. They have a new data center 100 km away that they wish to protect with RecoverPoint.

What steps are required to connect a new cluster to their existing RecoverPoint instance?

50. A customer environment includes a two-cluster RecoverPoint/SE instance. They have a new data center 500 km away that they wish to protect with RecoverPoint.

What steps are required to connect a new cluster to their existing RecoverPoint instance?

51. You are adding an RPA to a cluster using Deployment Manager.

What requirement must be satisfied before proceeding?

52. Which RecoverPoint tool is used for system conversions?

53. You are implementing a RecoverPoint/SE cluster using vRPAs.

What must be configured and available on the new VNX array prior to the installation of the cluster with Deployment Manager?

54. A RecoverPoint/SE cluster is using vRPAs. A second cluster needs to be connected.

Which RPA type must be used at the new cluster?

55. A customer is evaluating the deployment of RecoverPoint with their VMAX array. They want to deploy the RPAs in the virtual appliance form. They ask your opinion about using vRPA versus physical appliances.

What should you advise them?

56. A customer is evaluating the deployment of RecoverPoint with their VNX array. They want to deploy the RPAs in virtual appliance form. They ask your opinion about using vRPA versus physical appliances.

What should you advise them?

57. A customer is installing a single cluster RecoverPoint/SE environment and has decided to create a cluster of six virtual RPAs to perform RecoverPoint operations.

According to EMC best practices, how many ESX hosts are needed to host the required vRPAs?

58. A customer environment uses VMAX arrays for production storage. The customer wants to implement RecoverPoint for data protection. Having researched vRPAs, they want to use this technology as well.

What should you advise them?

59. What is a prerequisite for deploying a RecoverPoint/SE system?

60. When selecting the semi-automatic zoning method while installing RecoverPoint/SE, which zones are displayed per RPA?

61. Which statement is true regarding vRPAs?

62. Which statement is true regarding vRPAs?

63. Which Unisphere for RecoverPoint view displays both the system traffic and Consistency Group status?

64. In the Recovery tab of Unisphere for RecoverPoint, which option is used to temporarily mount an image?

65. After selecting a cluster in the RPA Clusters tab, which option can display alerts that have been logged for any of the physical components of the RecoverPoint system in that cluster?

66. In Unisphere for RecoverPoint, where should a user navigate in order to collect logs for support purposes?

67. The Getting Started wizard that is displayed the first time a user accesses Unisphere for RecoverPoint assists with performing what action?

68. System events can be copied to the clipboard from which Unisphere for RecoverPoint view?

69. When logging into an unattached RecoverPoint appliance for the first time, which username and password combination must be used?

70. You are working on a RecoverPoint local replication solution in an environment that includes VNX and VMAX storage arrays. You want to create a Consistency Group (CG) for your Oracle database. However, some of the database volumes are located in the VNX and others are located in the VMAX.

What is the recommended management solution?

71. Which journal action available in Unisphere for RecoverPoint will NOT result in a full sweep synchronization and the loss of all history in the existing journal?

72. In order to create a new Consistency Group, a user should navigate to which option within the Protection tab of Unisphere for RecoverPoint?

73. A company has a DR site connected using a 4 Gbps FC link and two RPAs on the primary site, and two RPAs at the DR site. They are experiencing high load events although the FC link is not fully utilized.

What would be the best solution to get the FC link utilization up as high as possible?

74. Which RecoverPoint feature allows the protection of volumes on both sides of a VPLEX Metro Cluster?

75. A storage administrator has an implementation with 40 Consistency Groups (CGs). They need to create distributed CGs.

What is the maximum number of distributed CGs that can be added to this particular system?

76. A storage administrator has a RecoverPoint environment with vRPAs containing 64 Consistency Groups (CGs). They want to create distributed CGs.

What is the maximum number of distributed CGs that can be added to this particular system?

77. You are protecting a volume using the wizard in Unisphere for RecoverPoint.

Which state will the new Consistency Group be in immediately after completing the wizard?

78. What is used when more performance is needed than a single RPA can provide for asynchronous replication?

79. What is the minimum size of the journal when using Distributed Consistency Groups?

80. A company with a DR site connected with a 2 Gbps FC link has three RPAs at each site. They are experiencing High Load events, although the FC link is not fully utilized.

What would be the best solution to get the FC link utilization up as high as possible while mitigating those events?

81. A company with a DR site connected with a 2 Gbps FC link has three vRPAs at each site. They are experiencing High Load events, although the FC link is not fully utilized.

What would be the best solution to get the FC link utilization up as high as possible while mitigating those events?

82. What should be used when more performance is needed than a single RPA can provide for asynchronous replication?

83. You are protecting a volume using the wizard in Unisphere for RecoverPoint.

Which state will the new Consistency Group be in immediately after completing the wizard?

84. Which FA ports must the production LUN be mapped to in order to perform write splitting using the VMAX splitter?

85. A Consistency Group consists of one production copy, one local copy, and two remote copies.

How many journals are required for this configuration?

86. You are creating a Consistency Group with the Protect Volumes wizard in a RecoverPoint/EX environment.

What LUNs are displayed in the list generated by the wizard?

87. What is a named point-in-time copy of data marked by the system for recovery purposes within RecoverPoint?

88. What is the first operation involved in the RecoverPoint Initialization process?

89. What is a characteristic of a full sweep?

90. What is a characteristic of a volume sweep?

91. How much data, at a minimum, must change in order for the snapshot consolidation process to start?

92. What user action causes a full sweep to occur?

93. Which statement is true about Logged Access mode?

94. When a copy is in Image Access mode, where is the Image Access Log stored?

95. You are a storage administrator tasked with creating a Consistency Group in a RecoverPoint/EX system. You launch the Protect Volumes wizard in Unisphere and notice that the desired production volume is not available.

What would be a possible cause?

96. You are a storage administrator tasked with creating a Consistency Group in a RecoverPoint/EX system. You launch the Protect Volumes wizard in Unisphere and notice that the desired production volume is not available.

What would be a possible cause?

97. Which Image Access Mode should be used when large portions of an image might be changed?

98. If you wanted to use the Roll Image in Background option to access an image, which access mode should you select?

99. Which image access mode provides the quickest way to access data?

100. When determining the journal volume size, which parameters must be considered?