D-VXR-DY-01 Dumps – The Replacement of D-VXR-DY-23 Exam for Your Dell VxRail Deploy Version 2 Certification

1. Which two files are used to automate VxRail deployment and validate the network configuration?

2. An implementation engineer is tasked with setting up RecoverPoint for VMs on a 5-node V570F cluster.

How many VMs are licensed to be protected on the cluster?

3. What is a consideration when using ToR switches with VxRail?

4. When using VxRail Manager, what is the source of information that can help validate good VxRail system post-deployment status?

5. An implementation engineer is configuring the network firewall to support a VxRail installation.

Where can they find the necessary firewall rules?

6. What is the default network traffic configuration for a VxRail node with 2 x 10 GbE ports?

7. What is a characteristic of the VxRail S Series node?

8. After finishing the rack and stack of a VxRail Model G410 cluster, in which sequence should the nodes be powered on?

9. Which VxRail Series is designed to support a VDI environment and requires a GPU card in each host?

10. According to the VxRail PEQ Engagement Details worksheet, links to what resources should the SE send to the customer?

11. Refer to the Exhibit which shows a red box around a node PSNT.

What is a characteristic of the node marked by the red box?

12. Match each component of the VxRail HCI System Software to its description.

13. During the activation of Internal SRS, the implementation engineer receives a message that the deployment has failed What is a possible cause?

14. What must be enabled on ToR switch ports connected to VxRail nodes to support multiple VLANs?

15. Which two vSAN licenses include entitlement for VMware HCI Mesh? (Select 2)

16. Which URL is used to enter the planning information for a new VxRail Cluster deployment?

17. A VxRail Cluster has just been deployed. Use the VxRail simulator to determine the Service Tag, Model, and ESXJ IP Address of the first node - vcluster730.esx01.edu.local. Note: It is necessary to dose (x) the simulator window before you can select a response to this question.

18. You are attempting to reset a single G Series node running 4.0.x code to the factory default. You discover that the configbundle.tgz file is corrupt.

What is the recommended method to recover the node?

19. According to Dell best practices, which VxRail series can be deployed in either datacenters or remote locations?

20. An existing Dell EMC customer wants to deploy a new VxRail cluster on premise. Each node of the new cluster will be configured with a single disk group containing one 1.6 TB Flash drive for the capacity tier. The customer plans on using mirroring and needs to have at least 2 TB of usable capacity in the vSAN datastore.

What is the minimum number of VxRail nodes required?

21. Which items are validated during the NVT test?

22. An implementation engineer has just completed the deployment of a new VxRail cluster. They are unable to connect to the vCenter Server.

What can they use to confirm the physical health of the VxRail nodes?

23. Use the VxRail simulator to explore the system.

What is the presented configuration? Note: It fs necessary to close (x) the simulator window before you can select a response to this question.

24. What can be used to determine whether hardware faults exist on a VxRail prior to its deployment?

25. A system administrator attempts to use the VxRail REST API to obtain system health status for their VxRail environment. The system returns the following error code: 401.

What should the administrator do to address this issue?

26. When adding a VxRail node the validation fails.

What could be the cause of this problem?

27. What is validated by running the Proactive VM Creation test in vCenter on a VxRail cluster?

28. What is the Dell EMC recommendation for VxRail Management VLANs?

29. What accurately describes VxRail G Series nodes?

30. Which network feature is unsupported on the VxRail system NIC ports?

31. Based on the exhibit, what is the correct IP address to use when resetting a G Series node with the reset script?

32. What is the recommended format for host names when using the VxRail Deployment Wizard for an External vCenter solution?

33. Which steps need to be taken to perform a file based restore of VxRail Manager?

34. During a node add procedure the new node cannot be discovered. A ping to the IPv6 address is responding.

What could be the cause of this issue?

35. An implementation engineer is in the validation phase of a VxRail deployment with two Dell EMC ToR switches.

Which command should they run on each of the ToR switches to validate that Link Aggregation has been configured according to Dell best practices for VxRail node interfaces?

36. A system administrator wants to collect a generated log file via the VxRail REST API.

Which command should they use?

37. What is the maximum number of nodes in a VxRail cluster when using 1 GbE links?

38. For which VxRail models must the iDRAC NIC Selection be set to Dedicated?

39. A customer has decided that they will be using the Spanning Tree protocol in their Dell EMC ToR switches.

How should the switch ports used for VxRail be configured to achieve a successful deployment?

40. The VxRail Deployment Wizard is being used on a VxRail cluster with a customer-supplied VDS.

Which settings must be used to ensure successful installation?

41. What is the correct sequence of steps to perform a RASR Factory Reset using an SD card?

42. What data protection option is included with VxRail?

43. The Market Place on a VxRail Manager is empty on a newly deployed system. Testing shows that the Internet is reachable through proxy in the management network.

Which action should be taken to correct this situation?

44. How can an administrator limit IPv6 traffic created by VxRail nodes?

45. Which command is used to restart the Loudmouth process on an ESXi node?

46. What is the minimum configuration for a vSAN Stretched Cluster?

47. Which proactive vSAN tests are built in vCenter?

48. From what environment must a network administrator run VxRail network validation?

49. When adding an S Series node to a Gen 2 VxRail 240F cluster the build fails.

What could be a possible cause of this situation?

50. An implementation engineer has just finished connecting a multi-rack VxRail cluster over a Layer 3 network. When attempting to migrate System VMs from the first rack to the second rack, they receive an error.

What is a possible reason for the error?

51. Which requirement must be met when expanding a 3-node VxRail G560F cluster with a fourth G Series node in the same chassis?

52. An implementation engineer is tasked with expanding an 8-node VxRail E560 cluster with an S570 node. The cluster has been configured with 1 GbE networking.

Which two should be considered when planning to expand the cluster? (Select 2)

53. What are the requirements for a customer-supplied VDS in a VxRail deployment?

54. A VxRail cluster has just been deployed. The administrator notices that Deduplication and Compression are not enabled.

What is the reason for this issue?

55. You are validating that a network environment is ready for a 4 node VxRail Model V570F deployment.

What types of DNS records must be created for VxRail components before implementation can begin?

56. View the Exhibit.

You are reviewing a VxRail Pre-Installation Site Checklist.

What conclusion can be drawn about the VxRail deployment from the exhibit?

57. Which vSAN feature requires an All-Flash cluster?

58. What is a requirement for the Top of Rack (ToR) switches used in a VxRail implementation?

59. What is used to control remote access to VxRail through SRS?

60. What is the recommended way to power up VxRail E, V, P, and S Series nodes?

61. What is the difference between Compression only and Deduplication and compression on a VxRail vSAN cluster?

62. What is required to enable vSAN encryption on a VxRail cluster?

63. Which license is required for vSAN Data-At-Rest Encryption, and what is characteristic of this type of encryption?

64. In a 24 node Stretched Cluster VxRail deployment, what is the acceptable Rout Trip Time (RTT) latency between sites?

65. What is the maximum number of supported nodes in a VxRail Stretch Cluster?

66. VxRail Validation is failing for a deployment engineer during initialization. The error states that Node 1 cannot reach Node 2 on the Management network. While investigating the issue, the deployment engineer is unable to ping the management network default gateway.

Which step in the VxRail Configuration Portal should have been followed to prevent the situation?

67. A company is planning to deploy their Virtual Desktop Infrastructure on VxRail. The solution should support 2D and 3D high end visualization.

Which VxRail license is required for this solution?

68. A company has multiple VxRail systems installed at geographically dispersed data centers They want to upgrade all their VxRail systems to the latest release- Before the upgrade, they want an inventory report of all the VxRail systems which shows the current health status and versions of all installed VxRail components.

What should be used to meet these requirements?

69. A VxRail Test Plan has been completed.

What is the protocol for recording the results?

70. A VxRail is being deployed with the external vCenter Server.

What is a consideration with the VxRail Management account?

71. What is the complete list of menu option choices available in the RASR factory reset procedure when booting from the RASR ISO?

72. An implementation engineer is validating a VxRail deployment of six V570F nodes, each with four 10 Gb connections. The VxRail nodes have not been powered on.

Which command should they run to confirm that the Dell EMC ToR switch is configured correctly?

73. A customer is performing self-deploy of a VxRail cluster. The VxRail Deployment Wizard fails to launch. The software appears to be corrupted.

What should they do to address the issue?

74. Which VxRail node type support only hybrid storage?

75. Which functionality is provided by the VxRail Physical View for a node?

76. A VxRail cluster 4.7.xxx environment is managed by the internal vCenter Server. An implementation engineer plans to deploy a new VxRail cluster using the existing vCenter Server instance, then use the customer-supplied VDS to manage both VxRail clusters.

What must be done?

77. When validating the VxRail health just after the VxRail initial configuration, there is a red exclamation mark on the MARVIN-Virtual-SAN-Cluster and the reported health alarm is ‘Component metadata health’.

A "Retest" action in the health service panel is performed and all the nodes in the cluster show health status as failed with the invalid state. Investigation does not reveal any hardware issues with the disks in use by vSAN.

What action should be taken next?

78. Which vSAN license is included with VxRail?

79. A VxRail E560F model was delivered six months ago and is now scheduled to be installed with the target code.

What is the correct order of steps to complete this task?

80. What is the base URL for the VxRail API call?

81. What is a consideration when expanding a VxRail cluster? (Choose two.)

82. What is a Dell EMC converged platform product?

83. A VxRail solution will be deployed with the embedded vCenter and an external DNS At a minimum, for which components must DNS records be created?

84. You have been asked to deploy a single, 4 node VxRail cluster for company. They would like to migrate from their existing vSphere 6.5 environment. They have also asked that vCenter Enhanced linked-mode be supported.

Based on best practice, what is the recommended deployment model?

85. How must node ports on Dell EMC ToR switches be configured when the Spanning Tree Protocol is enabled in an environment?

86. What is the correct Use Case for using VxRail-Managed vCenter Server?

87. During VxRail initial deployment the build fails. Support requests that logs be downloaded manually.

Which logs should be collected?

88. Which software component is an optional add-on for VxRail?

89. Where is the VxRail Manager pre-installed on a newly shipped, 4 node VxRail Model G410 system?

90. What is the purpose of the As-Built Configuration Generator?

91. The vCenter managing a VxRail cluster must be able to support both Enhanced Linked Mode and vSAN Encryption.

What is the correct configuration to satisfy this requirement?

92. Beginning with VxRail version 4.7, which product license option has changed?

93. What issue is one of the top reasons for failing to deploy SRS/VE in a VxRail environment?

94. You are expanding the capacity of a Hybrid VxRail by creating an additional disk group. The new disk group will be composed of five drives on all participating cluster nodes.

When you attempt to add the new disks to the vSAN datastore you receive an error message about there being no cache tier available.

What is the likely cause?

95. A new enterprise customer will be deploying VxRail, utilizing an existing vCenter.

Which server will be used to add and validate the host and domain names?

96. An implementation engineer is working with a customer to prepare an external vCenter Server for a new VxRail deployment with customer-supplied VDS.

What vCenter objects must exist for a successful VxRail deployment?

97. How can an administrator manually verify DNS records for a VxRail implementation?

98. In a VxRail deployment with an external vCenter Server, which VMware component(s) is automatically licensed?

99. How many nodes can be added simultaneously to an existing VxRail cluster running at code version 4.5?

100. Which service determines the primary node after powering on the VxRail nodes during the deployment of a VxRail cluster?