Noteworthy VMware 5V0-35.21 Dumps (V11.02) – Outstanding Learning Materials for Remarkable Exam Success

1. An administrator discovered a problem in the virtual infrastructure and obtained instructions that would resolve the triggered alert.

Which alert component was used by the administrator?

2. An administrator created a pricing card for a new environment. After the pricing card was created and attached, the administrator immediately checked-the cost dashboard but only sees zero prices for the VMs in the new environment.

What is the reason for this behavior?

3. An administrator needs to manage a vRealize Operations cluster using the Admin UI.

Which two actions are possible? (Choose two.)

4. What is used to monitor third-party solutions from vRealize Operations?

5. An administrator is configuring and managing multisite deployments.

Which Association Member Status is an invalid status?

6. The VMware Cloud Director administrator wants to make sure that the system is able to collect log bundles from all cells at once.

How should the administrator accomplish this goal?

7. Which three steps are required to enable east/west firewall in VMware Cloud Director Tenant Portal? (Choose three.)

8. A system administrator creates a common catalog to be used by all customers. For availability

purposes, the catalog will be consumed by a different VMware Cloud Director instance in a different country.

Which catalog setting enables the catalog to be shared across VMware Cloud Director instances?

9. Refer to the exhibit:

An administrator created a default policy for the company. Additionally, separate policies for the production environment and the test and development environment were created, based on the company policy.

What will be the impact, if any, of disabling some virtual machine metrics in the Production policy?

10. An administrator configured a Symptom with a Wait Cycle of 3 and a Cancel Cycle of 2. The default cycle was not changed.

How many minutes will it take for both to be triggered?

11. An administrator has been tasked with configuring service discovery to identify which virtual machines are running Active Directory services. All virtual machines are running on vSphere 6.5.

Which credentials, if any, are needed for the administrator to complete this task?

12. An administrator is configuring Workload Optimization to maximize the workload performance.

Which configuration proactively moves workloads so that the resource utilization ensures maximum headroom for all resources?

13. Users have reported several application VMs are performing very slowly. The system administrator was requested to find out the source of the problem on both VMs and/or ESXi hosts level. vRealize Operations has not been configured with Application Remote Collector.

Which action will help the administrator to quickly identify the underlying problem?

14. A vRealize Operations Manager administrator has the following requirement:

Whenever any object is selected in Widget-1 of Dashboard-A, then ONLY Widget-2 of Dashboard-B should be populated with the information.

Which setting of Widget-2 in Dashboard-B can help the administrator satisfy this requirement?

15. What is the minimum number of fault domains required to achieve vRealize Operations continuous availability with a primary node, data node, and witness node?

16. To meet a requirement for protection against data loss in the event of a physical rack failure, an administrator is deploying a vRealize Operation cluster in a Continuous Availability configuration.

Which three node types will be configured within this scenario? (Choose three.)

17. Which two conditions must be met to allow an automated action to be triggered from an alert? (Choose two.)

18. An administrator defines the role-based access control mechanisms for new vRealize Operations Manager implementation using LDAP authentication method.

Which statement accurately describes these users?

19. Which regulatory, standards-based compliance pack is available in vRealize Operations?

20. Which two options can be applied as a super metric? (Choose two.)

21. An administrator has been tasked with configuring vRealize Operations to ensure that workload performance across the VMware SDDC is the main priority. In the event of an issue, remediation activities should be automatically completed to minimize any impact to running workloads. A maximum of 10% cluster resources should be reserved for burst capacity.

Which option should the administrator configure to meet these requirements?

22. While creating a What-If Analysis to compare datacenters, the administrator would like to simulate 25% utilization of the resources.

Which workload option should be included in the scenario?

23. An administrator is working on a non-credential based service discovery in a virtualization environment using vRealize Operations.

Which package is a base requirement of the virtual machine?

24. Which two are supported Cloud Account types in vRealize Operations? (Choose two.)

25. After deploying vRealize Operations, an administrator needs to configure cost drivers to accurately reflect the purchase price and date of all nodes within the VMware vSAN cluster that are being monitored.

Which type of cost driver should the administrator select?

26. Which option in vRealize Operations is able to calculate measurements on a Guest OS?

27. At which frequency are new services discovered when using Service Discovery in vRealize Operations?

28. An administrator deployed vRealize Operations and has been tasked with ensuring that the VMware SDDC remains compliant to the VMware vSphere Security Configuration Guide. The compliance benchmark is showing that the VMware SDDC is not completely compliant to the standards.

Which three symptoms could have triggered a compliance alert? (Choose three.)

29. Which two statements accurately characterize reports in vRealize Operations? (Choose two.)

30. A customer is using multiple vRealize Operations (vROps) instances and has one central development vROps instance for creating dashboards. The administrator is tasked to share the newly created dashboards with other vROps instances, and the dashboards must be editable in the other instances.

Which action should the administrator take to accomplish this goal?

31. Which three key benefits does vRealize Operations provide within an environment? (Choose three.)

32. An administrator has deployed a vRealize Operations (vROps) cluster in a Continuous Availability configuration across the two racks in two fault domains. Following a network outage that occurred for several minutes, the administrator has been tasked to ensure that the vROps deployment is still healthy. They have noted that one cluster can still contact the witness node.

Which two events will occur as a result of the outage? (Choose two.)

A. The vROps cluster will bring the fault domain back automatically once the network has been restored.

B. The administrator will need to bring the other fault domain online manually.

C. The administrator will need to restart and resync the vROps cluster.

D. One fault domain will go offline.

E. Both fault domains will be offline.

33. During an upgrade of the vRealize Operations cluster via the Administration UI, the cluster has failed, and the status has changed to offline.

Which remediation strategy should be used to manage this problem and continue the installation process?

34. What is the purpose of the self-provider option within the dashboard definition?

35. When Workload Planning is performed, it returns that an existing cluster does not have the capacity to accommodate the selected virtual machines.

Which alternative is offered by default?

36. An administrator is unable to move a storage resource when using Workload Management.

What is the underlying reason for this problem?

37. An administrator is asked to onboard an on-premises vCenter instance into an existing vRealize Operations Cloud instance.

Which two steps are needed to accomplish this goal? (Choose two.)

38. An administrator has Telegraf agent installed on a server instance.

Which type of Remote Check may be configured?

39. Which type of node in a vRealize Operations (vROps) design allows an administrator to scale out vROps to monitor very large environments?

40. An administrator is creating a new alert definition. It was decided that this new alert should affect the Risk badge of an object when triggered.

Which setting should be configured by the administrator to achieve this goal?

41. An administrator has been using the troubleshooting workbench feature to identify an issue with a virtual machine and configured the specified time range and scope in the active session.

When returning to the troubleshooting workbench the following day, the administrator can see the Virtual Machine context as a recent search. Upon opening this object, though, the changes made the previous day are no longer visible.

What is the cause of this issue?

42. Which step is required before a Super Metric's data collection may begin?

43. A customer is planning to setup a new vRealize Operations environment using the following infrastructure:

There is one physical location.

This location has a few vCenter Servers.

These vCenter Servers will be monitored through vRealize Operations.

The customer wants to tolerate only one vRealize Operations node failure without losing any data in this vRealize Operations cluster.

Which vRealize Operations cluster feature must be used for this requirement?

44. An active policy has been enabled with this alert definition:

"Virtual machine CPU usage is at 100% for an extended period of time."

This is causing alerts to be triggered frequently by test/development VMs, so the administrator would like to exclude alerts triggered by the test/development VMs, but not other VMs.

Which action would help achieve this goal?

45. A system administrator wants to create a dashboard from widgets.

? (Choose three.)

46. An administrator has an existing vRealize Operations instance that monitors an existing vSphere infrastructure. The company has just deployed NSX-T across all hosts managed within this vSphere infrastructure.

The administrator has been asked to configure vRealize Operations to monitor the new NSX-T installation.

Which action should the administrator take to accomplish this goal?

47. What should be defined to ensure that group members can access vRealize Operations objects when importing a group from Active Directory into vRealize Operations?

48. An administrator has been tasked with configuring vRealize Operations cost drivers to assign a different cost per GB for different storage tiers.

Which steps should the administrator complete to meet this objective?

49. An administrator is using vRealize Operations Cloud and needs to create a one-way communication to the on-premises environment.

Which appliance is needed to achieve this goal?

50. Which two additional parameters are taken into account when sizing a vRealize Operations cluster using the sizing tool? (Choose two.)

51. Which three details can be configured when creating a custom view? (Choose three.)

52. An administrator is using vRealize Operations to optimize capacity within a vSphere Datacenter. The administrator will use the main categories for reclamation that are shown under the Reclaim view on the Home Screen navigation.

Which three main categories are available to the administrator in this view? (Choose three.)

53. An organization's owner has invited a new user to consume VMware Cloud Services.

How long is the invitation valid before it is revoked?

54. An organization's owner has invited a new user to consume VMware Cloud Services.

How long is the invitation valid before it is revoked?

55. Due to multiple hardware failures, several virtual machines were corrupted and are being restored from a recent backup. One of the corrupted virtual machines was the primary replica node of a large production vRealize Operations Manager cluster.

How should the system administrator resolve this availability issue within vRealize Operations Manager?

56. Which two pricing card types are available in vRealize Operations? (Choose two.)

57. Which three node configurations are supported during installation, according to vRealize Operations Sizing Guidelines? (Choose three.)

58. A customer is running a 4-node cluster for their Windows and Linux workloads. To keep the licensing costs at a minimum, the customer only licensed two nodes for Windows and two nodes for Linux within the cluster. Now, the administrator needs to ensure the workloads only run on their assigned nodes.

What should an administrator configure to achieve this goal?

59. There is a planned project to move some workloads from a company's vSphere environment, which is running in their data center, to a public cloud. The vSphere environment is being monitored by vRealize Operations. An administrator has been asked to get a monthly cost estimate for running the workloads in a public cloud.

What are two of the public cloud providers that are supported out-of-the-box in vRealize Operations What-If planning for public cloud costs? (Choose two.)

60. For the past 12 hours, a vRealize Operations Cluster has exhibited erratic behavior, and the remote collectors appear to be the cause. The administrator has contacted VMware support, and they have requested all relevant logs.

Because of bandwidth constraints, the customer will only be able to send the minimum amount of information to VMware support.

Which support bundle should the customer send that fits these constraints?