The Nutanix Certified Master – Multicloud Infrastruture (NCM-MCI) v6.5 Certification: Real NCM-MCI-6.5 Exam Dumps

1. Topic 1, Performance Based Questions

Environment

You have been provisioned a dedicated environment for your assessment which includes the following:

Workstation

• windows Server 2019

• All software/tools/etc to perform the required tasks

• Nutanix Documentation and whitepapers can be found in desktopfilesDocumentation

• Note that the workstation is the system you are currently togged into

Nutanix Cluster

• There are three clusters provided. The connection information for the relevant cluster will be displayed to the high of the question Please make sure you are working on the correct cluster for each item Please ignore any licensing violations

• Cluster A is a 3-node cluster with Prism Central 2022.6 where most questions will be performed

• Cluster B is a one-node cluster and has one syslog item and one security item to perform

• Cluster D is a one-node duster with Prism Central 5.17 and has a security policy item to perform

Important Notes

• If the text is too small and hard to read, or you cannot see an of the GUI. you can increase/decrease the zoom of the browser with CTRL +, and CTRL + (the plus and minus keys)

You will be given 3 hours to complete the scenarios for Nutanix NCMMCI

Once you click the start button below, you will be provided with:

- A Windows desktop A browser page with the scenarios and credentials (Desktopinstructions) Notes for this exam delivery:

The browser can be scaled lo Improve visibility and fit all the content on the screen.

- Copy and paste hot-keys will not work Use your mouse for copy and paste.

- The Notes and Feedback tabs for each scenario are to leave notes for yourself or feedback for

- Make sure you are performing tasks on the correct components.

- Changing security or network settings on the wrong component may result in a falling grade.

- Do not change credentials on an component unless you are instructed to.

- All necessary documentation is contained in the DesktopFilesDocumentation directory

Task4

An administrator will be deploying Flow Networking and needs to validate that the environment, specifically switch vs1, is appropriately configured. Only VPC traffic should be carried by the switch.

Four versions each of two possible commands have been placed in DesktopFilesNetworkflow.txt. Remove the hash mark (#) from the front of correct First command and correct Second command and save the file.

Only one hash mark should be removed from each section. Do not delete or copy lines, do not add additional lines. Any changes other than removing two hash marks (#) will result in no credit.

Also, SSH directly to any AHV node (not a CVM) in the cluster and from the command line display an overview of the Open vSwitch configuration. Copy and paste this to a new text file named DesktopFilesNetworkAHVswitch.txt.

Note: You will not be able to use the 192.168.5.0 network in this environment.

First command

#net.update_vpc_traffic_config virtual_switch=vs0

net.update_vpc_traffic_config virtual_switch=vs1

#net.update_vpc_east_west_traffic_config virtual_switch=vs0

#net.update_vpc_east_west_traffic_config virtual_switch=vs1

Second command

#net.update_vpc_east_west_traffic_config permit_all_traffic=true

net.update_vpc_east_west_traffic_config permit_vpc_traffic=true

#net.update_vpc_east_west_traffic_config permit_all_traffic=false

#net.update_vpc_east_west_traffic_config permit_vpc_traffic=false

2. Task 5

An administrator has been informed that a new workload requires a logically segmented network to meet security requirements.

Network configuration:

VLAN: 667

Network: 192.168.0.0

Subnet Mask: 255.255.255.0

DNS server: 34.82.231.220

Default Gateway: 192.168.0.1

Domain: cyberdyne.net

IP Pool: 192.168.9.100-200

DHCP Server IP: 192.168.0.2

Configure the cluster to meet the requirements for the new workload if new objects are required, start the name with 667.

See the Explanation for step by step solution.

3. Task 1

An administrator has been asked to configure a storage for a distributed application which uses large data sets across multiple worker VMs.

The worker VMs must run on every node. Data resilience is provided at the application level and low cost per GB is a Key Requirement.

Configure the storage on the cluster to meet these requirements. Any new object created should include the phrase Distributed_App in the name.

See the Explanation for step by step solution.

4. Task 9

Part1

An administrator logs into Prism Element and sees an alert stating the following:

Cluster services down on Controller VM (35.197.75.196)

Correct this issue in the least disruptive manner.

Part2

In a separate request, the security team has noticed a newly created cluster is reporting.

CVM [35.197.75.196] is using thedefaultpassword.

They have provided some new security requirements for cluster level security.

Security requirements:

Update the default password for the root user on the node to match the admin user password: Note: 192.168.x.x is not available. To access a node use the Host IP (172.30.0.x) from a CVM or the supplied external IP address.

Update the default password for the nutanix user on the CVM to match the admin user password.

Resolve the alert that is being reported.

Output the cluster-wide configuration of the SCMA policy to DesktopFilesoutput.txt before changes are made.

Enable the Advance intrusion Detection Environment (AIDE) to run on a weekly basis for the cluster.

Enable high-strength password policies for the cluster.

Ensure CVMs require SSH keys for login instead of passwords. (SSH keys are located in the DesktopFilesSSH folder).

Ensure the clusters meets these requirements. Do not reboot any cluster components.

See the Explanation for step by step solution.