Get MB-335 Dumps to Prepare For Microsoft Dynamics 365 Supply Chain Management Functional Consultant Expert Exam

1. Topic.1 Fabrikam inc sanitation cleaning solutions

Background

Fabrikam Inc. is a manufacturer of sanitation cleaning solutions and equipment including carpet/floor cleaners, pressure washers, scrubbers and vacuums.

Fabrikam Inc. is a single legal entity based in New York city.

_ Current environment

Products manufactured

• Cleaning equipment o floor cleaner

o pressure washers o scrubbers

o vacuums

• Liquid cleaning solutions o No scent

o Orange scent (subcontracted to a vendor named VendorA)

o Pine scent (subcontracted to a vendor named VendorA)

The production quantity for the finished unscented liquid cleaning solution is 40-liters. IngredientC 'or unscented liquid cleaning solution Is stored in inventory in 50-liter barrels and allocated in 50-liter increments. Two barrels of IngredientC are uses to produce a barrel of unscented liquid cleaning solution.

Production sites

• The Eastern United States facility manufactures equipment.

• The Western United States facility manufactures liquid cleaning solutions.

• Raw materials and finished products are stocked at the warehouse and distributed from the warehouse.

Warehouse facilities

The warehouse consists of the following zones:

_ Requirements

Cleaning equipment manufacturing

You identify the following require merits for manufacturing cleaning equipment:

• Production is Make to Stock and must be scheduled at an operational level.

• Machine equipment is produced on an assembly line. Scheduling must be based on production orders.

• Finished products must be packaged and shipped directly from the warehouse.

• To reduce delivery times and excess inventory, equipment must be produced as needed.

• The ability to schedule production must be based on resource capacity and the availability of required materials.

• Production order operations must be scheduled to start only when capacity and materials are available at the same time and in the required quantities.

Liquid cleaning solution manufacturing

• Production is Make lo Order and is scheduled at the job level. Products must be manufactured in batches.

• Finished products must be packaged and shipped directly from the warehouse.

• You must be able to calculate the estimated consumption of ingredients and ensure that the

amount is divisible by the number of units the raw material «s available.

• Formula changes must be reviewed and approved. You must ensure that approved formulas cannot be deleted or edited. Approved formulas may be deactivated.

• An ingredient used to manufacture unscented cleaning solution is defined as a restricted product. You must be able to automatically print a product safety data sheet (PSDS) with the packing slip for any order that includes unscented cleaning solution.

• Production must be scheduled to start by date and time according to the order that is specified by the production route.

• You must implement a scheduled Kanban rule that meets the following requirements:

o Prevent overloading a work cell for scheduled Kanbans. o Visualize excess inventory in a supermarket.

o Store products in supermarkets before they are consumed or shipped.

• You must link relevant financial dimension data to the inventory transactions at each site to ensure that you can trace profit and loss figures directly to East site and West site respectively.

• You must set up production operations for sub-contracting of Pine scent and Orange scent solution to Vendor A to ensure that a purchase order is automatically created based on estimation of a production order.

Costing

• The price of raw materials used for manufacturing unscented cleaning solution must be tracked based upon commodity exchange pricing. The margin and cost multiplier must be set up for commodity traded raw material.

• You must set up cost calculation groups to ensure that indirect costs that originate in the manufacturing of finished goods are recognized and absorbed into the product cost.

• The production manager needs to set up picking list journals and BOM item consumption.

Reporting

• Production control parameters must be setup for reporting of automatic BOM and Route consumption.

• You must create reports that include information about cost records and categories for items, and calculation formulas for indirect costs.

• You must treat manufactured items as purchased items for cost roll-up purposes during BOM calculations and reporting.

• You must configure automatic route consumption in connection with the automatic running of Report as finished.

Inventory control

You must not be required to track the tot number for items when you enter inventory information into the system. Lot numbers for items must be entered when items are picked from inventory.

Issues

Users report the following issues:

• The production manager observes that items are being deducted from inventory two times on production jobs. A shop supervisor mistakenly registers the process for assembling batteries for the pressure washers to Registered as prepared. You must reschedule the process for a future date.

• Customer1 orders 20 barrels of unscented solution. The order is confirmed. Production must be scheduled to start on December 21 to meet the customer’s delivery deadline.

• User2 reports that costs for manufactured items are twice as high as expected.

• User D reports that the formula for the liquid cleaning solution sometimes changes during production. You must enforce the policies regarding formula editing for current and future use.

You need to configure costing for raw materials used to manufacture unscented cleaning solution.

Which form should you use?

2. You need to configure production control parameters for liquid cleaning solution manufacturing.

What are two possible ways to achieve this goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

3. HOTSPOT

You need to resolve the production manager issue.

How should you configure manufacturing execution? To answer, select the appropriate option in the answer area. NOTE: Each correct selection is worth one point.

4. HOTSPOT

You need to resolve the shop supervisor’s issue.

Which options should you use? To answer, select the appropriate option in the answer area. NOTE: Each correct selection is worth one point.

5. HOTSPOT

You need to calculate estimated consumption of ingredients for liquid cleaning solution.

What is the consumption? To answer, select the appropriate option in the answer area. NOTE: Each correct selection is worth one point.

6. You need to configure production operations for the pine and orange scent solutions.

Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

7. You need to configure lot number control for inventory.

Which option should you use?

8. You need to configure the system to meet the order requirements for unscented cleaning solution.

Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

9. DRAG DROP

You need to implement the scheduled Kanban requirements.

Which rules should you use? To answer, drag the appropriate rules to the correct requirements. Each rule may be used once, more than once, or not at all. You may need to drag the spirt bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

10. You need to plan scheduling for Customer1’s order of unscented solution.

What are two possible ways to achieve the goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

11. Topic 2, CASE STUDY 1 Manufacturing Company

General information

A manufacturing company produces custom configured-to-order motorcycles. The company plans to implement Dynamics 365 Supply Chain Management. The company contains one legal entity located in Missouri where all production and warehousing operations occur.

Customization options

The custom motorcycles have a variety of selections that can be selected in the listed order by the end customer, including the following:

Customization restrictions

The following restrictions on customizations are in place:

* Green color can only be sold with the Legend Trim.

* Orange color can be sold with the Sport or Legend Trim.

* The ML seat must be included in the Legend package.

* The MS seat must be included in the Sport package.

Manufacturing facilities

The company includes the following manufacturing groups: Assembly and Plastic Molding. The Assembly group is responsible for assembling the motorcycles with purchased and manufactured goods. The Plastic Molding group is responsible for manufacture of all plastic parts used in the assembly area.

Motorcycle manufacturing

The parts for the product assembly are picked from the warehouse and staged at the correct workstation by a warehouse operator for each production order.

Plastic manufacturing

Plastic parts are molded using dyes that create multiple parts at once. The parts are machined in the same production process to remove excess plastic and add additional holes for assembly. Excess plastic is recycled back into the feedstock of the same color plastic chips for use in the molding process.

Metal Parts

Raw metal parts are purchased fully machined but without primer or paint. The parts are subcontracted to a vendor for primer and paint based upon the color requirements.

Facility

The company has a single warehouse that supports both the assembly and plastic manufacturing areas. The warehouse consists of three aisles with 15 bins and three shelves. The facility has no Wi-Fi capacity but has hardwired terminal stations throughout the assembly production line.

Transactions are currently completed by office staff. Raw materials transfer must support capacity constraints for paint and primer.

Requirements

The company has a single warehouse that supports both the assembly and plastic manufacturing areas. The warehouse consists of three aisles with 15 bins and three shelves. The facility has no Wi-Fi capacity but has hardwired terminal stations throughout the assembly production line.

Transactions are currently completed by office staff. Raw materials transfer must support capacity constraints for paint and primer.

Sales Order

The company has the following requirements for sales orders:

* During the configuration of a sales order, invalid combinations must be prevented.

* Each configuration must create a unique bill of material (BOM) and Route based on options selected.

* Sales pricing for the sales order must be based upon options selected.

* Due to emissions regulations, the motorcycles cannot be sold to the state of California.

Motorcycle manufacturing

The company has the following requirements for motorcycle manufacturing:

* Schedule labor only at the labor pool level without machines by day

* Produce motorcycles within a scheduled day in any order.

* Record actual production labor with start/stop times.

* Record manager approval of labor entered prior to posting.

* Post actual material consumption after production is finished.

Plastic manufacture

The company has the following requirements for motorcycle manufacturing:

* Schedule both labor and machines.

* Adjust schedules by using a Gantt chart.

* Backflush standard labor by operation.

* Post actual material consumption at the start of production.

* Track and allocate costs to the excess plastic.

* Report multiple molded part numbers during the same production run.

* Determine the correct mold to use on a production order.

* Generate a batch number for each production order.

Metal Parts

The company has the following requirements for metal parts manufacturing:

* Schedule shipments to the vendor for painting.

* Receive painted parts into inventory from the vendor.

* Track vendor inventory levels.

Default

You must configure defaults for manufacturing execution production orders to meet the following requirements:

* Ensure accuracy for production order pick list posting.

* Ensure correct pick list creation.

Issues

A. In the current system, the company cannot calculate overhead rates and determine the breakdown of material, labor, machine, and overhead costs for production.

B. The company is manually calculating an 8% overhead on materials and posting a journal manually.

You need to create the constraint for the ML seat selection.

Which expression constraint should you use?

A. Implies[Trim==Legend,Seat==ML]

B. Seat!=ML

C. [Trim==Legend|Seat==ML]

D. Implies[Seat==ML,Trim==Legend]

12. You need to set up the correct production solution for the assembly are a.

Which solution should you implement?

13. HOTSPOT

You need to configure system attributes.

Which attribute types should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

14. HOTSPOT

You need to modify the production order defaults for the manufacturing execution production order Start process.

What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

15. You need to set up the configuration model to price the motorcycles correctly.

What should you do?

16. DRAG DROP

You need to set up the system to calculate the overhead rates automatically for production.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

17. HOTSPOT

You need to configure scheduling for each production area.

Which scheduling options should you use? To answer, select the appropriate option in the answer area. NOTE: Each correct selection is worth one point.

18. HOTSPOT

You need to configure each item for plastic manufacturing.

Which production types should you use? To answer, select the appropriate option in the answer area. NOTE: Each correct selection is worth one point.

19. You need to set up the state control for sales of motorcycles.

Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

20. You need to set up the metal production route and BOM.

Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

21. You need to configure the system for plastic operations.

Which two parts should be manually reported as finished? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

22. Topic 3, Case Study 3 Adventure Works

This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.

To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other question on this case study.

At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.

To start the case study

To display the first question on this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.

Background

Adventure Works Cycles is a high-end bicycle manufacturer in North America. Their standard model bicycles are available year-round. Limited-edition bicycle models are released several times a year to boutique retailers domestically.

Adventure Works has had the most success with their limited-edition bicycles. These bicycles have high margins, are in high demand, and have a strong following with the younger generation biking community.

Current environment

General

Adventure Works expects to triple their manufacturing capabilities in the next few years due to increasing demand. The company plans to invest in Dynamics 365 Finance, Dynamics 365 Supply Chain Management, and the Power Platform products to migrate from a custom-built enterprise resource planning (ERP) solution and Microsoft Excel worksheets.

Adventure Works sells only to the United States and Canada. Despite their limited market, they cannot keep up with current demand. Over time, they want to expand their market to remain profitable.

Adventure Works has no capabilities or budget to undertake any development beyond Excel formula-level tasks.

Bicycle manufacturing

Bicycle models are measured and reported against how well a single model performs as a sum of all the variations of that model. For example, the Street Kid YOLO model sold 25,000 units in 2019 across all variations of the product, but the Purple Female frame made up 30 percent of that model’s sales.

The Street Kid YOLO models sell in different volumes depending on the market.

The creation of production orders for bicycles occurs monthly and is based on historical sales.

Each part of a bicycle’s assembly occurs at a different station in the Adventure Works production facility.

A piece of paper that has eight sections accompanies a bicycle throughout the manufacturing process. As each step is completed, the respective section is completed and signed off by a production worker.

The completed paper is used in the put-away process by the warehouse workers.

Financials

The standard model and limited-edition bicycle teams are separate operating units within the manufacturing division. Financials are tracked and reported separately even though they are produced and sold in the same sales channels.

Updates to the standard model bicycle models are created when a part for a bicycle becomes unavailable. This can change the cost of the product.

An updated model of a bicycle with new parts will be maintained as a new item and have a new price. However, it will look like the exact same product to retailers and distributors.

Manufacturing process

The bicycle manufacturing process is shown in the following graphic:

Limited-edition bicycle process

The limited-edition bicycles are made up of an Adventure Works custom frame with all other parts created by local artists and manufacturers.

Each bicycle has a unique set of new items that make up the bill of materials (BOM) because all parts are created to specification.

A single pilot limited-edition bicycle is created as a proof of concept.

Adventure Works occasionally reuses components from existing bicycles, but most limited-edition bicycles are made of handcrafted components designed to specifications.

Each limited-edition bicycle is built, and hand signed by a single Adventure Works artisan.

Sales price must be auto calculated after the cost price is derived.

Before creating the proof of concept limited-edition bicycle, the approximate sales price needs to be determined through a cost-plus 20 percent calculation.

All items except for the frame in the prototype process are considered finished items and can be sold individually.

The frame items require modifications in accordance with the manufacturing process as well as painting.

Each Adventure Works limited-edition bicycle artisan is scheduled to create a specific number of bicycles in a production run that must be completed by a certain date.

Limited-edition bicycle artisans work exclusively on a given run of limited-edition bicycles and are not able to work on other tasks.

Limited-edition bicycle BOM assembly process

The prototype process for the limited-edition bicycles is shown in the following graphic:

Requirements

General

Adventure Works will consist of three legal entities: the primary legal entity of the United States (AWUS), sales in Canada (AWCA), and an international expansion (AWIN).

AWIN must be able to sell only standard model bicycles.

AWUS and AWCA must be able to sell both standard model and limited-edition bicycles.

Warehouse workers must use the Warehouse Management mobile application to manage all inventory inbound and outbound from the warehouse.

Bicycle manufacturing

The handlebars, back wheels, and front wheels must not change for any of the bicycle model configurations.

Standard model bicycle production scheduling must be configured to start as soon as possible.

Bicycle components must be automatically reserved when the item is released to the production floor.

Standard model bicycle production must be automatically created on a predefined schedule.

As soon as bicycles are completed, they must be available to fulfill the backlog of orders.

Limited-edition bicycle production must be configured to meet the end date for when the bicycles must be completed.

Production orders need to track financials by standard model or limited-edition bicycle manufacturing teams.

The system must log the immediate consumption of BOMs for traceability.

All inventory is warehouse enabled.

Finished goods are reported as finished by the warehouse worker who picks up the finished product from the packaging area.

Finished products must automatically have put-away work completed for them.

New limited-edition bicycle process

Adventure Works is creating a new, limited-edition bicycle to commemorate the company’s tenth anniversary. The limited-edition bicycle will be designed for charity events and be produced for the summer season.

The bicycle must be available in men’s, women’s, and unisex frame styles. It will be painted in one of 50 hand-painted designs representing the charity of the customer’s choosing.

A limited run of 100 bicycles must be created.

The limited-edition bicycles must use the same production process as the standard model bicycles.

The limited-edition bicycles must use the same parts used for previous limited-edition bicycles, except for the unique paint colors.

Frames must be painted in-house.

Five painting options are available only in the unisex frame style.

New limited-edition bicycle orders

Customers must be able to place sales orders for the item in the chosen frame configuration, including style and color.

When an order for the new limited-edition bicycle is created, payment must be provided.

An approval for an order must exist for the order to be processed.

Upon approval of an order, production must start immediately and not require re-entry of data.

DRAG DROP

You need to create the new summer limited edition bicycle in Dynamics 365 in preparation for taking orders.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

23. You need to create the production orders for standard model bicycles.

Which method should you use?

24. You need to configure the bicycles’ production resource.

Which option should you use?

25. You need to determine the sales price for a new limited-edition bicycle for the summer season.

What should you do?