FORKLIFT Forklift Operator Certification Exam Dumps

1. In order to lift a laden pallet safely the fork width should be adjusted so that:

2. If a load appears to be stacked unsafely and in danger of collapse the forklift operator should:

3. The lift truck should normally be driven:

4. When sounding the horn, you should give a few sharp blasts. This is because:

5. When leaving the machine, the key should be switched off and removed.

This is:

6. What is the main purpose of the overhead guard?

7. When a laden lift truck is being driven on a ramp/incline, the load should face:

8. The Health and Safety At Work Act 1974 (HASWA) applies to:

9. The ideal way to pick up a pallet is:

10. A truck has a rated capacity of 2000 kg at 500 mm load center. This means:

11. Whilst operating the lift truck in the working environment it is:

12. An unladen lift truck should have its forks pointing down a gradient. This is to improve:

13. If a fault develops on the machine during operation, operators should:

14. The load center on a counterbalanced forklift truck is:

15. Providing you are on flat ground, if the load obscures your view you should:

16. When using hydraulic controls, which of the following control(s) of the machine should be used?

17. The lift truck operator should check that the machine is in a safe condition:

18. What is the correct way to approach a stack?

19. When following another motive-powered vehicle, the recommended separation distance is:

20. When travelling with a laden lift truck on level ground the position of the load should be:

21. A forklift driver must always look:

22. Who can operate a forklift?

23. In the event of a rollover what SHOULD the operator do?

24. Forklift must travel with load close to ground and at safe speed.

25. You can find out a load capacity, lift height and forklift weight by reading:

26. How often should prestart be done?

27. How many people are permitted to ride on a forklift?

28. Who is responsible for checking the security of a trailer before loading and unloading?

29. Can a mobile phone be used when driving forklift?

30. What is a lever to move forks up/down?

31. How often should operators inspect their forklift?

32. Who has the right of way?

33. What is the first thing to do before driving into a trailer?

34. How high should a load be carried on a smooth surface?

35. When traveling down a ramp or incline:

36. How soon should repairs be made to a forklift?

37. When is it possible to travel with a load raised at its maximum height?

38. Training on one type of vehicle:

39. A forklift operator's performance must be evaluated:

40. You can get under a raised load to check: